SciELO - Scientific Electronic Library Online

 
vol.34 número3Microstructure, morphology, adhesion and tribological behavior of sputtered niobium carbide and bismuth films on tool steelRepresentation of phase equilibria and densities for complex systems using a van der Waals volume translated equation of state with a UNIFAC mixing rule índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniería e Investigación

versão impressa ISSN 0120-5609

Resumo

RODRIGUEZ-GUTIERREZ, J. A  e  ARISTIZABAL-OCHOA, J. D. Biaxial bending of slender HSC columns and tubes filled with concrete under short- and long-term loads: II) Verification. Ing. Investig. [online]. 2014, vol.34, n.3, pp.19-25. ISSN 0120-5609.  https://doi.org/10.15446/ing.investig.v34n3.42950.

An analytical method that calculates both the short- and long-term response of slender columns made of high-strength concrete (HSC) and of tubes filled with concrete with generalized end conditions that are subjected to transverse loads along the span and to axial loads at the ends (causing single- or double-curvature under uniaxial or biaxial bending) is presented in a companion paper. The columns that can be analyzed with this method include those with solid and hollow (rectangular, circular, oval, C-, T-, L-, or any arbitrary shape) cross sections and columns made of circular and rectangular steel tubes filled with HSC. In this paper, the validity of the proposed method is tested against experimental results from the technical literature that examined over seventy column specimens.

Palavras-chave : Axial load; Biaxial bending; Columns; Composite materials; High-strength concrete; Deflections.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )