SciELO - Scientific Electronic Library Online

 
 número37Methodology for the evaluation of antifouling paints performance in static conditionsSimulation of melting process and net diagrams for the Cupola Furnace of the University of Antioquia índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230
versão On-line ISSN 2357-53280

Resumo

GARCIA, Germán; CASANOVA, Herley; ARAQUE, Pedronel  e  TORO, Alejandro. Assesment of thermodynamic adhesion work on AISI 4140 steel plates and rolling bearing liners with anaerobic adhesives. Rev.fac.ing.univ. Antioquia [online]. 2006, n.37, pp.164-175. ISSN 0120-6230.

The thermodynamic adhesion work of AISI 4140 flat plates and AISI 52100 steels in contact with two commercial anaerobic adhesives was evaluated by measuring the advancing and receding contact angles in an immersion-emersion tensiometer. The polar and non-polar adhesive components were calculated by the van Oss method for all the adhesive-metal pairs tested. The effect of the application of a primer on the metal surface was also considered. The results showed that application of the primer nada significant effect on the wettability of adhesives, although the adhesion work remained practically unchanged with respect to the pure adhesive-metal joints. On the other hand, major differences on the response of the two commercial were observed between the two commercial adhesives studied, mainly as a consequence of their chemical composition and rheological properties.

Palavras-chave : adhesion work; contact angle; surface free energy; anaerobic adhesive; primer.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons