SciELO - Scientific Electronic Library Online

 
 número38A comparative study of two rapid tooling technologies; Coproinmold - Selective Laser SinteringThe effect of pH on morphology and electrical properties of polyaniline índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844

Resumo

GONZALEZ, Carlos Andrés; BUSTAMANTE, Felipe  e  MONTES DE CORREA, Consuelo. Catalytic Hydrodechlorination of Dichloromethane, Chloroform and Tetrachloroethylene . Rev.fac.ing.univ. Antioquia [online]. 2006, n.38, pp.73-87. ISSN 0120-6230.

Kinetic parameters (reaction rate constants, reaction order and activation energies) were determined for dichloromethane hydrodechlorination in the presence of chloroform and tetrachloroethylene traces (loading between 0.3-0.8%) over Pd catalysts between 100-200 ºC. Two Pd supports were used: a commercial alumina and a titania xerogel. The activity increased with palladium loading. The presence of chloroform and tetrachloroethylene inhibited dichloromethane hydrodechlorination. Catalysts were characterized by X-ray diffraction, elemental analysis, nitrogen adsorption (BET), TGA, chemisorption, TPR.

Palavras-chave : dichloromethane; chloroform; tetrachloroethylene; alumina; titanium; sol-gel; kinetic; palladium.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons