SciELO - Scientific Electronic Library Online

 
 issue44Educational software for the teaching of the dynamics and control of shell and tube heat exchangersDevelopment and implementation of an impedance measurement technique for bovine wet bone samples author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Revista Facultad de Ingeniería Universidad de Antioquia

Print version ISSN 0120-6230On-line version ISSN 2422-2844

Abstract

RENDON, Julio; CADAVID, Francisco  and  AMELL, Andrés. Flame structure simulation in a methane/air coflow partially premixed burner. Rev.fac.ing.univ. Antioquia [online]. 2008, n.44, pp.61-74. ISSN 0120-6230.

The effect of the equivalence ratio on the partially premixed methane / air laminar flame structure, in a coflow atmospheric burner was simulated. Three equivalence ratios were studied (Φ =1.6, Φ =2.0, Φ =3.5) keeping constant the released energy. The simulation was carried out using FLUENT V 6.2. The radial profiles of temperature and velocity were compared with the experimental data. The influence of the mesh structure in the solution was studied. A criterion to report the height of the flame from the OH profile was also defined. The effect of the equivalence ratio on the flame structure was analyzed from temperature and species contours. The typical structure of a partially premixed flame for the three equivalence ratios was obtained.

Keywords : partially premixed flame; combustion simulation; methane/air laminar flames; coflow burner.

        · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License