SciELO - Scientific Electronic Library Online

 
 número47Aggregation of latex microparticles: simulation and experimental verificationSupport vector machine model for regression applied to the estimation of the creep ruptura stress in ferritic steels índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844

Resumo

HURTADO OROBIO, Edwin; DEL RISCO MORENO, Efraín  e  GONZALEZ BETANCOURT, Mauricio. Measured pressures on the basis of bottom slab with gaps in the flow direction in a channel. Rev.fac.ing.univ. Antioquia [online]. 2009, n.47, pp.39-52. ISSN 0120-6230.

A study was conducted to determine whether the back edges of the longitudinal gaps of a floor tile fixed to the bottom of a canal with a supercritical flow convert kinetic energy into pressure energy using Froude numbers in the range of 2.84 to 10.12. In each test the pressure was measured on 16 points on the bottom surface of the tile with piezo-resistive transducers along three longitudinal lines: one central line with 8 sensors and two lateral lines with 4 sensors each on either side of the central line. In this manner the distribution of the median pressures under the test tile was determined. The test tile is similar to those used in civil engineering structures for the purpose of avoiding the erosive action of the turbulence of a supercritical flow. The analysis of the measured pressures shows that even when the top surfaces of the canal floor and of the protective block are in the same horizontal plane, the back edges of the longitudinal gaps transform the energy of velocity into pressure energy. In such a way a factor has been identified that intervenes in the production of the hydrodynamic force that lifts revetments of different structures, and that has until now been ignored in the study of this problem.

Palavras-chave : hydrodynamics pressure; uplift; linings; slabs; hydraulic model; stilling basins.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons