Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Revista Facultad de Ingeniería Universidad de Antioquia
versión impresa ISSN 0120-6230versión On-line ISSN 2422-2844
Resumen
BARRAZA, Juan y MEJIA, Isabel. Ultraclean coal production using froth flotation and acid leaching. Rev.fac.ing.univ. Antioquia [online]. 2009, n.49, pp.50-60. ISSN 0120-6230.
Ultraclean coals represent an important raw material to elaborate high value products such as carbon fiber, electrodes, carbon foam and so on. In this work, ultraclean coals having less than 0.50% (w/w, db) of ash and 1.00% θ(w/w) of mineral matter were obtained using flotation column and leaching with acid fluorhídric (HF) and nítric (HNO3). Ash content was reduced from 19.60 to 8.70 %, using three flotation stages. Chemical processing, using HF 7.53 M and HNO3 2.30 M, produced 1.42% of ash content, 0.86 % of sulphur and 2.00% of mineral matter, whereas a combined process, froth flotation followed by leaching of HF 19.2M and HNO3 8.12M produced a coal having 0.48 % of ash content, 0.71% of sulphur content and 0.96% of mineral matter. However, when it was used the original coal (unfloated) at the same acid conditions of the combined process, it was obtained an ultraclean coal having 0.33% of ash content.
Palabras clave : ultraclean coal; froth flotation; acid leaching.