Resumen

GALLEGO, Jaime et al. Dry reforming of methane with La_1-XA_XNiO₃ and LaNi_1-XB_XO₃ (A: Ce or Pr and B: Co or Mg) perovskites as catalysts precursors. Rev.fac.ing.univ. Antioquia [online]. 2010, n.52, pp.9-18. ISSN 0120-6230.

Perovskite-type LaNiO₃ was synthesized by four different methods: autocombustion, sol-gel, calcination of nitrate and freeze-drying. The catalyst that presented the highest activity in terms of conversion of CH₄ and CO₂ to H₂/CO was obtained from perovskites synthesized by the autocombustion method. The Co-containing catalysts showed less activity than those with only Ni. This decrease in activity was attributed to the formation of Co-Ni alloy. The Mg-substituted catalysts showed a decrease in carbonaceous deposits due probably to increased basicity of the catalysts. The greatest resistance to the accumulation of carbonaceous deposits was observed on the catalysts containing Ce and Pr, which is attributed to the redox properties of oxides (PrYOX and CeYOX) which facilitate the gasification of carbonaceous deposits formed during the reaction.

Palabras clave : Perovskitas; reformado de metano; gas de síntesis; freeze-drying; Perovskites; methane reforming; syngas; freezedrying.

        · resumen en Español     · texto en Español     · Español ( pdf )