Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
Revista Facultad de Ingeniería Universidad de Antioquia
versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844
Resumo
LEIJA HERNANDEZ, Gabriela; LOPEZ BONILLA, José Luis e ITURRI HINOJOSA, Luis Alejandro. Performance analysis of serial and shunt microwave switches designed with p-i-n diodes of different semiconductor materials. Rev.fac.ing.univ. Antioquia [online]. 2011, n.58, pp.183-190. ISSN 0120-6230.
A performance analysis of serial and shunt microwave switches based on p-i-n diodes of different semiconductor materials is presented. The materials analyzed are Si, GaAs, SiC, GaN, InP and GaSb. The serial type microwave switch designed with GaSb, GaAs, Si and GaN-ZB p-i-n diodes reach the lowest values of insertion losses compared to other materials. A 0.2dB insertion loss difference is perceived between GaSb and SiC6H p-i-n diodes. The optimal results of isolation for frequencies less than 10GHz is obtained with switches designed with SiC and GaN p-i-n diodes. The shunt type switches designed with GaN p-i-n diodes reach the lowest values of insertion losses compared to other materials. Approximately 0.2 dB insertion loss differences between the responses of GaN and Si pin diodes in the frequency of 40 GHz and a difference of 0.4 dB at 60 GHz frequency were identified. GaN p-i-n diodes are most recommendable for the design of shunt switch devices.
Palavras-chave : p-i-n diodes; semiconductor materials; microwave switches.