Resumo

RENGIFO-SANTANA, Johnny Wladimir et al. Parameter estimation method for induction machines using instantaneous voltage and current measurements. Rev.fac.ing.univ. Antioquia [online]. 2015, n.75, pp.57-66. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.n75a07.

This paper proposes an off-line method to determine the electrical parameters of an induction machine based on two instantaneous indicators (impedance and power). The method uses the induction machine start-up voltage and current measurements. Also, the proposed method employs a space vector dynamic model of the induction machine referred to the fixed stator reference frame. This model allows the representation of the instantaneous indicators in terms of the machine electrical parameters. An error function is defined using the indicators obtained from the measurements, versus the corresponding derived from the dynamic model of the machine. The estimated parameters are obtained by minimizing this error function by means of a constrained nonlinear optimization algorithm. The effectiveness of the proposed method was experimentally validated. The results from the model using the estimated parameters fit the experimental data sets with average error below 5%.

Palavras-chave : induction machines; parameter estimation; rotating machine transient; nonlinear estimation.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )