SciELO - Scientific Electronic Library Online

 
 número89Polycaprolactone- Chitosan- Ag coatings on Ti6Al4V: Critical synergic aspects analyzed by Raman, EFM and contact angleEnantioselective epoxidation of styrene using in-situ generated dimethyldioxirane and dimeric homochiral Mn(III)-Schiff base complex catalyst índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230versão On-line ISSN 2357-53280

Resumo

DI GRACI TIRALONGO, Verónica Carmen; ZURITA-HURTADO, Omar José  e  CAPACE-AGUIRRE, María Cristina. Model for microhardness profile prediction of annealed AISI 1045 steel cylindrical bars subjected to torsion. Rev.fac.ing.univ. Antioquia [online]. 2018, n.89, pp.68-72. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.n89a09.

In this work, the effect of the torsion process angle of twist and distance from the center of cylindrical bars on the microhardness profile of annealed AISI 1045 steel was studied. The results showed that the microhardness increase with the evaluated parameters and the hardening is related to the plastic deformation caused by the process rather than by microstructural transformations. Based on the experimental results, ANOVA-Pareto analysis was conducted proving that the angle of twist is the most influential control factor (59.35 %) among the parameters investigated. Finally, a model to predict the microhardness profile from the torsion process is presented.

Palavras-chave : AISI 1045; ANOVA; microhardness; torsion.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )