SciELO - Scientific Electronic Library Online

 
 número102Conceptual design of an alignment device for transfemoral prosthesis índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844

Resumo

ARISTIZABAL ALZATE, Carlos Esteban; ALVARADO TORRES, Pedro Nel  e  VARGAS RAMIREZ, Andrés Felipe. Simulation of methanol production from residual biomasses in a Cu/ZnO/Al2O3 packed bed reactor. Rev.fac.ing.univ. Antioquia [online]. 2022, n.102, pp.115-124.  Epub 13-Out-2021. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.20200907.

This article aims to simulate an algorithm constructed in MATLAB to represent the catalytic conversion of SYNGAS into methanol in a packed-bed reactor, based on chemical kinetics for a heterogeneous system with a Cu/ZnO/Al2O3 as a catalyst, and complementary math and phenomenological models, as a pressure drop and catalyst deactivation. Model validation is developed, comparing reference results and the results by running the algorithm in MATLAB using a reference SYNGAS composition. Also, the constructed model considers a catalyst deactivation by sintering and pressure drop along the reactor. Several parameters were evaluated to identify the pro conditions for methyl alcohol production; these parameters include the gasifying agent selection, the biomass and steam ratio effect, and the biomass origin.

Palavras-chave : Methanol; SYNGAS; catalyst; simulation.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )