SciELO - Scientific Electronic Library Online

 
vol.35 issue3Heterosis for ether extract production and its components in seed of Cucúrbita argyrospermaCombined effect of green-colored covers and shading on the growth of sisal (Furcraea hexapetala) plants author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Agronomía Colombiana

Print version ISSN 0120-9965

Abstract

GIL, Rodrigo; BOJACA, Carlos Ricardo  and  SCHREVENS, Eddie. A tailor-made crop growth model for the tomato production systems in Colombia. Agron. colomb. [online]. 2017, vol.35, n.3, pp.301-313. ISSN 0120-9965.  https://doi.org/10.15446/agron.colomb.v35n3.65615.

Potential crop models simulate the plant growth under non-limiting biophysical conditions with no other factor than the climate to which the plants are exposed to. These models may fail to adequately represent the crop performance if they are not adapted to the local conditions. The particularities of Colombian tomato systems (greenhouse and open field) demand the recalibration of existing models to make a more realistic representation of those systems. Therefore, a locally calibrated crop model was proposed considering both production systems. To this purpose, four on-farm calibration experiments were carried out, two under greenhouse conditions with average temperatures of 17.4 and 17.9°C in Santa Sofía (Boyacá) and two under open field conditions in Páramo and San Gil (Santander), with average temperatures of 20.6 and 24.0°C, respectively. The crops were commercially managed according to the local practices. Plant data was collected through destructive measurements carried out on a fortnightly basis, while climate data were collected for the entire crop growth cycle. Independent calibration of the dry matter fractions allocated at the plant organs in function of thermal time resulted in an acceptable model performance. The calibration of the model under commercial conditions gave a better representation of the local systems but at the expense of accuracy since on-farm experiments cannot be controlled as those performed in research facilities.

Keywords : crop modeling; cropping system; protected cultivation; thermal time; yield potential.

        · abstract in Spanish     · text in English     · English ( pdf )