SciELO - Scientific Electronic Library Online

 
vol.25 número43Microestrutura e propriedades mecânicas da soldadura GTAWAlgoritmos metaheurísticos para construir Covering Arrays: Revisão índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería

versão impressa ISSN 0121-1129

Resumo

ROBAYO-SALAZAR, Rafael Andres; MEJIA DE GUTIERREZ, Ruby  e  MULFORD-CARVAJAL, Alexandra Jimena. Production of building elements based on alkali-activated red clay brick waste. Rev. Fac. ing. [online]. 2016, vol.25, n.43, pp.21-30. ISSN 0121-1129.

This paper analyzes the feasibility of reusing a red clay brick waste (RCBW) in order to produce building elements such as blocks, pavers and tiles, by using the technique of alkaline activation. The production of these building elements was based on the design of a hybrid mortar with 48.61 MPa of compressive strength, at 28 curing days at room temperature (25 °C). The hybrid mortar was synthesized by adding 10% by weight of Portland cement (OPC) to the RCBW, Red Clay Brick Waste. As alkaline activators were used commercial industrial grade sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). Building elements were physically and mechanically characterized, according to Colombian Technical Standards (NTC). This technology process is presented as an alternative for the reuse of RCBW and its contribution to the environmental sustainability.

Palavras-chave : geopolymer mortars; Red Clay Brick Waste (RCBW).

        · resumo em Português | Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons