SciELO - Scientific Electronic Library Online

 
vol.27 número48Elaboração de scaffolds de dióxido de titânio para aplicações médicas índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería

versão impressa ISSN 0121-1129

Resumo

ARENAS-VARA, María Ángeles; SKELDON, Peter  e  GARCIA-VERGARA, Sandra Judith. Effect of copper-enriched layers on localized corrosion of aluminium-copper alloys. Rev. Fac. ing. [online]. 2018, vol.27, n.48, pp.7-15. ISSN 0121-1129.  https://doi.org/10.19053/01211129.v27.n48.2018.8016.

Copper-enriched layers were developed onto aluminum-copper alloys using alkaline etching in sodium hydroxide, for both, sputter deposited and bulk conditions. Enriched alloys were evaluated by potentiodynamic polarization in sodium chloride solution in order to determine the effect of the enriched layers on the pitting potential of the alloys. Rutherford backscattering spectroscopy was employed to quantify the enrichments and their locations just beneath the alumina-based oxides remaining from the etching. For the sputter deposited aluminum-copper alloys, the results show some scattering of the pitting potential data, and no correlation between pitting potential and the alloy enriched layer. In the case of bulk Al-2wt.%Cu alloy, with the copper in solid-solution, the pitting potential increased for the enriched specimens, indicating also a different pit morphology, with respect to the non-enriched alloy.

Palavras-chave : aluminium-copper alloys; anodizing; copper enrichment; pitting.

        · resumo em Português | Espanhol     · texto em Inglês     · Inglês ( pdf )