SciELO - Scientific Electronic Library Online

 
vol.29 número54Materiais compostos ablativos de matriz polimérica e sua aplicação na fabricação de componentes de propulsão aeroespacialSmart Lumini: Sistema de luminosidade inteligente baseado em IoT para ambientes acadêmicos usando hardware livre índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería

versão impressa ISSN 0121-1129versão On-line ISSN 2357-5328

Resumo

SERRANO, Carlos-Herminio; CRUZ, María-Pia  e  MARTIN-SCHMADKE, Italo-Federico. Application of the Dynamic Compaction for Large Imprint Structures in Córdoba, Argentina. Rev. Fac. ing. [online]. 2020, vol.29, n.54, e10861.  Epub 30-Jul-2020. ISSN 0121-1129.  https://doi.org/10.19053/01211129.v29.n54.2020.10861.

The dynamic compaction method, very little spread in Argentina, has not been used in the city of Córdoba until this occasion. Its application in the “Bajo Grande Sewage Liquid Treatment Plant” has been a great technical and economic achievement. This article synthesizes geotechnical studies before the improvement, characterizes the dynamic compaction from the existing soil profile, and requirements of major works such as settlers and aeration tanks. Aspects of work control during its execution, data from soil studies after improvement, parameters of the mathematical model used to carry out the prognosis of seats according to the evaluated soil profile and measurements of validation of seats with the sedimentation tanks in operation are mentioned. Compaction was carried out by dropping a 10000 kg mass in free fall at a height of 15m from a crane, on points approximately 2.8 m apart. Two phases of several falls were executed allowing an increase in the relative density of the original soil to a maximum of 70%, reducing vertical settlements by 10%, decreasing angular distortion in half, doubling the bearing capacity, and reaching a maximum depth improvement near 6m. Then a ground leveling phase with mechanical compaction was carried out by project requirement. It could be concluded that the foundation of the construction with reinforced concrete stalls on the improved soil, presented a very superior technical-economic feasibility with respect to the alternative of a deep foundation with piles, which justified the execution of dynamic compaction in this work.

Palavras-chave : dynamic compaction; finite element; rayleigh; relative density; settlements; soil improvement.

        · resumo em Português | Espanhol     · texto em Espanhol     · Espanhol ( pdf )