SciELO - Scientific Electronic Library Online

 
vol.19 número2Satisfaction and associated factors in students who use the dental services of the health care institution “IPS Universitaria” (Medellín)Digital morphometric analysis of root changes in upper incisors of young patients during 18 months of orthodontic treatment índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Odontología Universidad de Antioquia

versão impressa ISSN 0121-246X

Resumo

BARGUIL DIAZ, Julia Lucía; CHICA ARRIETA, Edwin  e  LATORRE CORREA, Federico. Stress distribution in three types of posts with different lengths. Rev Fac Odontol Univ Antioq [online]. 2008, vol.19, n.2, pp.24-37. ISSN 0121-246X.

INTRODUCTION: the purpose of this study was to observe the stress distribution of teeth restored with intraradicular retention elements (posts) of different lengths, using the finite element analysis (FEA). METHODS: a tridimensional model of finite elements (4mm model with 34010 nodes and 9317 elements, 6 mm model with 36798 nodes and 10371 elements, 8 mm model with 38587 nodes and 11025 elements) of an upper central incisor is presented. The model of the dowel restored tooth involved trabecular bone, cortical bone, periodontal ligament, gingiva, root, gutta-percha, resin luting cement, posts, composite resin core (for prefabricated posts), metallic posts and metal ceramic crown. The dowels were fabricated with noble metal casting alloy, titanium and fiber glass. The dowels were cemented with resin luting cement. The variables included were modulus of elasticity, Poisson´s ratio, and post´s length (4, 6 and 8 mm). A load of 1N was applied to the crown at an angle of 45 degrees; von Mises stresses, main maximum and minimum stresses, maximum shear stress were then calculated. RESULTS: finite element analysis indicated that the distribution of stresses generated on the modeled tooth with different post lengths decreased significantly, this is in agreement with an inverse proportional relationship with the material´s modulus of elasticity. Stresses on the root were also reduced when post length was increased (4, 6 and 8 mm). CONCLUSIONS: within the limitations of this study, it was found that strong variations exist with respect to the post length in relation with the stress distribution on the dentin and in the post itself, being less the distribution of stresses in the dentin and in the posts with more length and with a higher modulus of elasticity.

Palavras-chave : poste; longitud de poste; análisis de elementos finitos; post; post length; finite element analysis.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons