SciELO - Scientific Electronic Library Online

 
 issue23Design and implementation of a data acquisition system to measure local solar powerComparative analysis of a theoretical model of sound measurements and software SOUNDPLAN Ver. 6.2 applied to vehicular traffic author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Revista de Ingeniería

Print version ISSN 0121-4993

Abstract

SANTAMARIA DIAZ, Naliett Karina; YAMIN LACOUTURE, Luis Eduardo  and  ARCILA LOPEZ, Carlos Alberto. Resistance to chloride in the additioned concrete with blast furnace slag. rev.ing. [online]. 2006, n.23, pp.48-57. ISSN 0121-4993.

For determining the chloride resistance of different concrete samples, the rapid chloride permeability test was used. This procedure has been established in the standard test method ASTM 1202 [1] For this purpose, national equipment was used. It follows the specifications of the method. The tested concretes had 6 different water/binder ratios (w/b) and three percentages of blast-furnace slag as a replacement of part of cement. Although the age of the concrete was the same in all the cases, the time of saturation in water was different.

Keywords : concrete; chloride; corrosion; blast-furnace slag; curing; strength; porosity.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License