SciELO - Scientific Electronic Library Online

 
vol.7 issue2Dynamics of a System Associated with a Piecewise Quadratic FamilyPrediction of Molal Apparent Heat Capacity and Critical Micellar Concentration (cmc) of Aqueous Solutions of Quaternary Ammonium Salts at Temperature (283.15 to 298.15) K author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Ciencia en Desarrollo

Print version ISSN 0121-7488

Abstract

SANCHEZ CEPEDA, Ángela Patricia et al. Preparation and Characterization of Electrospun Polymeric Membranes of Polycaprolactone and Chitosan for Controlled Release of Thiamine Chlorhydrate. Ciencia en Desarrollo [online]. 2016, vol.7, n.2, pp.133-151. ISSN 0121-7488.

Abstract Currently there are significant research on the preparation of bioabsorbable porous membranes that allow the controlled release of drugs and vitamins. In this study it was proposed to prepare porous membranes from polycaprolactone (PCL) and chitosan (CS) under the electrospinning technique, applying different parameters in order to evaluate its internal characteristics and properties for a potential application as liberator of thiamine hydrochloride (vitamin B1). Besides studying the in vitro release kinetics developed TC with membranes prepared. A polymer membrane was obtained from a solution of PCL/CS w/w (8:1) and PCL/CS w/w (10:1) with a load of TC regarding PCL w/w (20:1) dissolved in TFA/DCM v/v (80:20), with lows defects such as bulbs and uniform diameters. The fibers were characterized with support techniques of Scanning Electron Microscopy (SEM), Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), X-Ray Diffraction (XRD), contact angle (Hydrophilicity of the fibers), mechanical testing of the membranes in study, Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM). The release of active substance is performed in a buffered saline by phosphates (PBS buffer) over 37°C and pH = 7.4. The release kinetics was analyzed by plotting cumulative data versus time. This system was able to release from 65% to 85% thiamine hydrochloride in a 60 h, approximately, which shows the potential of these membranes to effectively release vitamin B1.

Keywords : Thiamin hydrochloride; Electrospinning; Controlled release; Polycaprolactone; Chitosan.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License