Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
Ingeniería y Desarrollo
versão impressa ISSN 0122-3461versão On-line ISSN 2145-9371
Resumo
TORRES SALCEDO, Jaime e LASCANO FARAK, Sheila. Influence of plastic deformation in 6061 -T6 aluminium alloy welded specimens on the hardness characteristics. Ing. Desarro. [online]. 2008, n.24, pp.24-32. ISSN 0122-3461.
The purpose of this paper is to study the effect of the compression stress applied on the HAZ (Heat affected Zone) in 6061-T6 Aluminum Alloy specimens. The main tools used to achieve this objective were the Vickers micrometer, the Transmission Electron Microscopy (TEM), the Differential Scanning Calorimeter and the Optical Microscope. It was found that with a natural aging time of four years the microhardness values were clearly increased, while with the compression stress these values showed a small increase. However, the more stable hardness profiles found in the compressed samples were attributed to the compression treatment.
Palavras-chave : 6061-T6 Aluminum Alloy; microhardness; natural aging; compression stress; metallographic analysis; plastic deformation.