SciELO - Scientific Electronic Library Online

 
vol.29 número1A low cost touch-screen interface for image collageEffect of the removed metal volume and cutting speed in the cutting tool wear during high speed turning of AISI 1045 índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniería y Desarrollo

versão impressa ISSN 0122-3461versão On-line ISSN 2145-9371

Resumo

GALLEGO CANO, Jorge Luis et al. CNxthin films grown by PLD at different temperatures. Ing. Desarro. [online]. 2011, vol.29, n.1, pp.50-60. ISSN 0122-3461.

Carbon Nitride (CNx) thin films were grown by pulsed laser deposition using a Nd:YAG laser (1064 nm, 500mJ), in a graphite target (99.999%) on Si(100) substrate for three different temperatures 21, 50 and 200 °C, in a nitrogen atmosphere at constant pressure of 2,66 Pa. The FTIR's analysis made to the films, revealed the presence of active modes around 1108 cm-1, 1465 cm-1, 2270 cm-1, associated with the simple, double and triple bonding of CN, respectively. Chemical composition was studied by EDX analysis, low nitrogen contents were found between 3 and 6 at%. And the mechanical properties of the films were evaluated using nanoindentation technique. The highest hardness was 14 GPa at 200°C substrate temperature.

Palavras-chave : Carbon Nitride; Nanoindentation; Pulsed Laser Deposition.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons