SciELO - Scientific Electronic Library Online

vol.29 número1CNx thin films grown by PLD at different temperaturesEffect of the initial pH and the catalyst concentration on TiO2-based photocatalytic degradation of three commercial pesticides índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google


Ingeniería y Desarrollo

versão impressa ISSN 0122-3461versão On-line ISSN 2145-9371


HERNANDEZ GONZALEZ, Luis W. et al. Effect of the removed metal volume and cutting speed in the cutting tool wear during high speed turning of AISI 1045. Ing. Desarro. [online]. 2011, vol.29, n.1, pp.62-83. ISSN 0122-3461.

This work deals with the experimental study of the effect of the removed metal volume and cutting speed on flank wear of two coating carbide and a cermet inserts during the dry finishing turning of AISI 1045 steel at moderate, medium and high cutting speeds. The results were compared using the volumetric dimension of the cutting tool life, the variance analysis and lineal regression analysis in order to describe the relationship between the flank wear and removed volume, obtaining the adjusted model equations. The investigation showed a significant effect of cutting speed and machined metal volume on the flank wear, achieving that the three coating layers insert demonstrated the best performance while the two layers insert had the worst behaviour of the cutting tool wear at high cutting speed.

Palavras-chave : AISI 1045 steel; cutting tool; flank wear; high speed turning; removed metal volume.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons