SciELO - Scientific Electronic Library Online

 
vol.36 número2Influence of the type of electrode on the microstructure and coefficient of friction obtained by sliding test to hard coatings deposited by welding SMAWQuantitative microbial risk assessment for crops irrigated with wastewater from the WWTP of Ilha Solteira (SP) índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniería y Desarrollo

versão impressa ISSN 0122-3461versão On-line ISSN 2145-9371

Resumo

MILLAN-PARAMO, Carlos  e  MILLAN-ROMERO, Euriel. O Topological optimization using particles swarm metaheuristic. Ing. Desarro. [online]. 2018, vol.36, n.2, pp.343-358. ISSN 0122-3461.  https://doi.org/10.14482/inde.36.2.10127.

This work proposes the implementation of the PSO (particle swarm optimization) metaheuristic to replace the optimality criterion used in the topology optimization method proposed by Andreassen. To evaluate and validate the PSO performance we studied three plane elasticity problems reported in the literature. Each problem was analyzed with three different finite element mesh types in order to compare the results obtained in terms of topology, strain energy value and average runtimes. It was established that the procedure involving the PSO, yields lower computational times in problems with more refine meshes. Finally, the material distribution and the energy values obtained were similar to those reported in the work of Andreassen giving validity to the work presented here.

Palavras-chave : material distribution; particle swarm optimization; topological optimization.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )