SciELO - Scientific Electronic Library Online

 
vol.4 issue1DETERMINATION OF RESERVOIR DRAINAGE AREA FOR CONSTANTPRESSURE SYSTEMS USING WELL TEST DATAPRESSURE AND PRESSURE DERIVATIVE TRANSIENT ANALYSIS WITHOUT TYPE-CURVE MATCHING FOR ELONGATED RESERVOIRS WITH CHANGES IN FACIES OR WIDTH author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


CT&F - Ciencia, Tecnología y Futuro

Print version ISSN 0122-5383On-line version ISSN 2382-4581

Abstract

DIAZ-PRADA, Carlos-Andrés et al. OPTIMIZATION OF ELECTRICAL SUBMERSIBLE PUMP ARTIFICIAL LIFT SYSTEM FOR EXTRAHEAVY OILS THROUGH AN ANALYSIS OF BOTTOM DILUTION SCHEME. C.T.F Cienc. Tecnol. Futuro [online]. 2010, vol.4, n.1, pp.63-73. ISSN 0122-5383.

This study presents the analysis of the variables that have the greatest impact on energy requirements for an artificial lift system applied to extra heavy crude oils, considering an uncertainty behavior analysis through their sensitivity in the vertical flow modeling implemented for a Chichimene Field well. The selected variables are the viscosity and fluid density, the required artificial lift system pressure differential, well depth, the flow rate of produced fluids and the dilution percentage. The oil produced in this field has a density of 7,8 °API, and the well studied features a water cut of about 10% and produces a total of 2400 BOD. For this flow naphtha dilution rates were defined using up to 20% by volume. The ranges of energy required for the lifting system for different scenarios raised by the analysis variables were also determined. For these conditions a variation of the energy required 20% for a fluid flow incremental of 50 BFOD was obtained, as established from the flow capacity of the well and the pressure required for sustaining a pressure head of 100 psi and 400 psi. Bottom dilution scheme establishes a change in artificial lift system energy requirement, of up to 25% for a 15% of diluter, whereas the relationship between the volumes produced and the system arrays gives an energy efficiency of 40%.

Keywords : extra heavy oil; viscosity; density; dilution; energy; pressure; artificial lift system; electrical submersible pump.

        · abstract in Spanish     · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License