Resumo

GOKDOGAN, Osman; ERYILMAZ, Tanzer  e  KADIR YESILYURT, Murat. THERMOPHYSICAL PROPERTIES OF CASTOR OIL (RICINUS COMMUNIS L.) BIODIESEL AND ITS BLENDSPROPIEDADES TERMOFÍSICAS DE BIODIESEL DE ACEITE DE RICINO (RICINUS COMMUNIS L.) Y SUS MEZCLAS. C.T.F Cienc. Tecnol. Futuro [online]. 2015, vol.6, n.1, pp.95-128. ISSN 0122-5383.

In this study, biodiesel (methyl ester) was produced from Castor Oil (Ricinus communis L.) (CO) using sodium hydroxide (NaOH) and methanol (CH₃OH) by the two-step transesterification method. Nine different fuel blends (2, 5, 10, 20, 30, 40, 50, 60 and 75% by volume blending with diesel) were prepared. The density values of Castor Oil Biodiesel (COB) and its blends were measured at the temperature range from 0 to 93°C in steps of 5°C and the kinematic viscosity values of COB and its blends were measured at the temperature range from 30 to 100°C in the steps of 5°C. The results showed that the density, kinematic viscosity, calorific value, flash point, pH, copper strip corrosion and water content of COB are 932.40 kg·m^-3, 15.069 mm².s^-1, 38.600 MJ·kg^-1, 182°C, 7, 1a and 1067.7 mg.kg^-1, respectively. The density and kinematic viscosity of fuel samples decrease as temperature increases; and also these properties decrease as a result of the increase in the amount of diesel in the blends.

Palavras-chave : Castor oil; Transesterification; Fuel property; Biodiesel; Density; Kinematic viscosity.

        · resumo em Português | Espanhol     · texto em Inglês     · Inglês ( pdf )