SciELO - Scientific Electronic Library Online

 
vol.17 issue2Application of edible coatings in green plantain slices subjected to deep-fat fryingToys as teaching tools in engineering: the case of Slinky® author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Ingeniería y competitividad

Print version ISSN 0123-3033

Abstract

MORENO-TELLE, Carlos M.; PEREZ-RODRIGUEZ, Iván F.  and  QUINTERO-SANCHEZ, Luis C.. Influence of deposit parameters on the adhesion of Ni-Al-Mo coatings by thermal spray. Ing. compet. [online]. 2015, vol.17, n.2, pp.101-109. ISSN 0123-3033.

In this research paper the influence of deposition parameters (flow, distance, surface roughness, and temperature) on the Ni - Al -Mo adhesion of coating was evaluated, using as an anchor- base layer on AISI 1020 steel. The results show that the flame temperature and the spraying distance have a great influence on the morphology and adhesion of the coating. Results of adhesion tests show that this increase when the dust is applied at a distance of 15 cm between the pistol and the substrate using a fuel atmosphere where the temperature of the fusion powder is greater. Likewise, the deposition parameters have a direct effect on the porosity and surface roughness of the coating which the importance of it is that this alloy will serve as anchoring surface coating on the coating deposited Ni-Al-Mo. The chemical, mechanical and microstructural characterization of the coating was made by SEM, XRF, Microhardness and pull off tests

Keywords : Adhesion; ceramic coatings; surface anchoring; thermal spray.

        · abstract in Spanish     · text in English     · English ( pdf )