Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Ciencia e Ingeniería Neogranadina
versión impresa ISSN 0124-8170versión On-line ISSN 1909-7735
Resumen
CAMACHO TAUTA, Javier Fernando et al. STRENGTH TO THE CUTTING IN DISCONTINUITIES WITH DIFFERENT DEGREES OF ROUGHNESS. Cienc. Ing. Neogranad. [online]. 2009, vol.19, n.1, pp.55-70. ISSN 0124-8170.
In this research triaxial testings were done on artificial rocks made with a mortar (cement, sand and water) of different strength. Cylinders were made with and without a discontinuity orientated to 60° with regard to the horizontal axis and three different degrees of roughness, (polished flat, polished wavy and wavy). The mortar testing strength parameters were obtained and was analyzed the influence of the different roughness degrees by the Barton's criterion, obtaining the roughness coefficient of the discontinuity.
Palabras clave : JRC; roughness; discontinuity; triaxial in rocks.