22 1 
Home Page  

  • SciELO

  • Google
  • SciELO
  • Google


Ciencia e Ingeniería Neogranadina

 ISSN 0124-8170

BARANDICA LOPEZ, Asfur; LEON CASTRO, Edwin Andrés    BRAVO RUANO, Erik Javier. COMUNICACIÓN ENTRE UN ESCÁNER DEVICENET AUTÓNOMO Y UNA APLICACIÓN SOFTWARE MEDIANTE MODBUS/TCP. []. , 22, 1, pp.151-164. ISSN 0124-8170.

^les^aRESUMEN Las redes industriales para automatización han experimentado un gran auge en los últimos años y DeviceNet es uno de los protocolos con mayor popularidad. En una red DeviceNet se identifican dispositivos esclavos, por lo general sensores y actuadores, y al menos, un dispositivo escáner encargado de configurar y administrar las transacciones en la red. El escáner debe comunicarse directamente con los dispositivos de la red DeviceNet y entregar la información recolectada a un dispositivo de mayor nivel jerárquico como un PLC o un PC. Aunque existen especificaciones y recomendaciones para elaborar un dispositivo esclavo DeviceNet, no hay una pauta clara de cómo implementar el maestro o escáner DeviceNet, ni tampoco para diseñar el enlace de comunicación entre el escáner y el equipo de control. En este artículo, se presenta un esquema de comunicación diseñado especialmente para soportar el intercambio de datos entre un escáner DeviceNet y una aplicación software residente en un PC.^len^aABSTRACT Industrial automation networks recently have boomed, including DeviceNet as one of the most popular protocols. In a DeviceNet network, slave devices usually sensors and actuators are identified, and at least a scanner in charge of configuring and managing network transactions. Such machine must communicate directly to other devices on DeviceNet network and deliver the collected information to send it to a higher hierarchical level equipment, such as a plc or a pcpc. Although there are specifications and recommendations to build a DeviceNet slave, there is not a clear pattern to implement the DeviceNet master or scanner nor a design of the communication link between the scanner and control equipment. In this paper we show a communication scheme specifically designed to support data exchange between a DeviceNet scanner and a software resident on a pc.

: .

        · | |     · |     · ( pdf )