Resumen

RAMIREZ PATINO, Juan Fernando  y  HERRERA ARANGO, Manuel Leandro. EXPERIMENTAL MEASUREMENT OF MAGNITUDE REACTIVE FORCES IN MACE SUPPORTS OF PANELA MILL APOLO 5. Rev. Fac. Nac. Agron. Medellín [online]. 2008, vol.61, n.1, pp.4445-4450. ISSN 0304-2847.

The panela production in Colombia is an activity for thousands of farmers in which base their economy and sustenance and in which technology takes decades without any type of technological advance in machinery and different stages of production process in the same one. Specifically the machinery used for the extraction of cane juice is based on technology of more than 100 years with few efforts for its improvement, maybe due to ignorance of the implied variables in the extraction process and its influence on forces and stresses that are generated on mill cureñas, which makes difficult the improvement of these from the point of view of form, materials and dimensions. This work shows the experimental development for measurement of reactive forces in supports of mace shafts in  Panelero mill - Apolo 5.  This includes the correct selection of measurement points in mill, the election of measurement technique and design of devices for measurement, as well as the procedure to follow for mill instrumentation. The obtained results allow to identifying the cureñas zone and shafts where the forces are maximum.

Palabras clave : Panela mill; panela; load sensor; forces.

        · resumen en Español     · texto en Español     · Español ( pdf )