SciELO - Scientific Electronic Library Online

 
vol.11 issue2Fiber bragg grating sensors' validation for strain and temperatureLow energy impact and tensile stress of hemp fibre reinforced bioepoxi laminates before and after seawater immersion author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Iteckne

Print version ISSN 1692-1798

Abstract

SANDOVAL-AMADOR, Anderson Andrés; PENA-BALLESTEROS, Darío Yesid  and  PIRATONA-MORALES, Ulises. Evaluation of corrosion resistance on coatings obtained by sputtering of a chromiun cathode by electrochemical techniques. Iteckne [online]. 2014, vol.11, n.2, pp.183-189. ISSN 1692-1798.

The corrosion resistance of coatings obtained by sputtering of a chromium target on substrates of steel AISI H13 was evaluated. Through the analysis of electrochemical impedance spectroscopy (EIS) and Tafel polarization curves in a solution of 3% NaCl by weight was found that these coatings have a corrosion rate lower than the substrate. Moreover, EIS data fit an equivalent electrical circuit that contains two constant phase elements; this is typical circuit for interpreting the behavior of a metal electrode on which has been deposited an insulating and porous coating.

Keywords : AISI H13; EIS; sputtering; Tafel; corrosion rate.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )