SciELO - Scientific Electronic Library Online

 
vol.11 número2Fiber bragg grating sensors' validation for strain and temperatureLow energy impact and tensile stress of hemp fibre reinforced bioepoxi laminates before and after seawater immersion índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Iteckne

versão impressa ISSN 1692-1798

Resumo

SANDOVAL-AMADOR, Anderson Andrés; PENA-BALLESTEROS, Darío Yesid  e  PIRATONA-MORALES, Ulises. Evaluation of corrosion resistance on coatings obtained by sputtering of a chromiun cathode by electrochemical techniques. Iteckne [online]. 2014, vol.11, n.2, pp.183-189. ISSN 1692-1798.

The corrosion resistance of coatings obtained by sputtering of a chromium target on substrates of steel AISI H13 was evaluated. Through the analysis of electrochemical impedance spectroscopy (EIS) and Tafel polarization curves in a solution of 3% NaCl by weight was found that these coatings have a corrosion rate lower than the substrate. Moreover, EIS data fit an equivalent electrical circuit that contains two constant phase elements; this is typical circuit for interpreting the behavior of a metal electrode on which has been deposited an insulating and porous coating.

Palavras-chave : AISI H13; EIS; sputtering; Tafel; corrosion rate.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )