SciELO - Scientific Electronic Library Online

 
vol.11 número2Evaluation of corrosion resistance on coatings obtained by sputtering of a chromiun cathode by electrochemical techniquesConstitutive models applied during densification of coalwood binary solid biofuels índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Iteckne

versão impressa ISSN 1692-1798

Resumo

RAMON-VALENCIA, Fabuer et al. Low energy impact and tensile stress of hemp fibre reinforced bioepoxi laminates before and after seawater immersion. Iteckne [online]. 2014, vol.11, n.2, pp.190-195. ISSN 1692-1798.

This experimental work is aimed at the mechanical characterization of a new biocomposite. Such material is a no-woven hemp fibre reinforced bioepoxi (SuperSap®) manufactured by infusion. The laminate was immersed in seawater during a bioactivity period of six months. The impact behavior, before and after seawater immersion, under low-velocity impact at E0 = 20J and environment temperature of T = 23ºC was investigated. Besides, tensile stress tests were performed and the breaking surfaces were observed by Scanning Electron Microscopy (SEM). The results show stiffness lost due to resin degradation after seawater immersion. The water absorption pattern of the new biocomposite leads to increase the dissipated impact energy.

Palavras-chave : Biocomposite; hemp fibre; impact resistance; tensile stress.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )