SciELO - Scientific Electronic Library Online

 
vol.11 número2Low energy impact and tensile stress of hemp fibre reinforced bioepoxi laminates before and after seawater immersion índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Iteckne

versão impressa ISSN 1692-1798

Resumo

FORERO-NUNEZ, Carlos Andrés; CAMARGO-VARGAS, Gabriel  e  SIERRA-VARGAS, Fabio Emiro. Constitutive models applied during densification of coalwood binary solid biofuels. Iteckne [online]. 2014, vol.11, n.2, pp.196-203. ISSN 1692-1798.

An alternative to harness biomass resources for energy production is by producing solid biofuels. The final density and the durability of solid biofuels made of coal-sawdust mixtures vary depending upon characteristics such as the coal mass ratio in the mixture and the applied pressure. This work aims to evaluate the applicability that existing constitutive models, obtained from biofuels based on agricultural residues, have when using binary coal-sawdust mixtures of uniform particle size at different pressures. Unlike the Walker and Heckel model, the Kawakita model exhibited the best results fitting a coefficient of determination R2 greater than 0.95. This model allows to analyze the different pressures that should be employed to achieve solids with final densities above 900kgm-3, improving the design stage of manufacturing systems.

Palavras-chave : Biomass; coal; constitutive models; densification; pellets; renewable energy.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )