SciELO - Scientific Electronic Library Online

 
vol.19 número1Modeling of hydrological processes applying artificial intelligence techniques: a systematic literature reviewControlled release of Metoprolol Succinate from the organo-mineral complex Metoprolol Succinate-Montmorillonite índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Iteckne

versão impressa ISSN 1692-1798

Resumo

NGANDU, Cornelius Ngunjiri. Compressive Strengths Prediction for Concrete with Partial Plastic Fine Aggregate using Neural Network and Reviews. Iteckne [online]. 2022, vol.19, n.1, pp.61-68.  Epub 09-Set-2022. ISSN 1692-1798.  https://doi.org/10.15332/iteckne.v19i1.2548.

In recent past years, plastic waste has been a environmental menace. Utilization of plastic waste as fine aggregate substitution could reduce the demand and negative impacts of sand mining while addressing waste plastic challenges.

This study aims at evaluating compressive strengths prediction models for concrete with plastic-mainly recycled plastic-as partial replacement or addition of fine aggregates, by use of artificial neural networks (ANNs), developed in OCTAVE 5.2.0 and datasets from reviews. 44 datasets from 8 different sources were used, that included four input variables namely: -water: binder ratio; control compressive strength (Mpa); % plastic replacement or additive by weight and plastic type; and the output variable was the compressive strength of concrete with partial plastic aggregates.

Various models were run and the selected model, with 14 nodes in hidden layer and 320,000 iterations, indicated overall root mean square error (RMSE) , absolute factor of variance (R2), mean absolute error (MAE) and mean absolute percentage error (MAPE) values of 1.786 MPa, 0.997, 1.329 MPa and 4.44 %. Both experimental and predicted values showed a generally increasing % reduction of compressive strengths with increasing % plastic fine aggregate.

The model showed reasonably low errors, reasonable accuracy and good generalization. ANN model could be used extensively in modeling of green concrete, with partial waste plastic fine aggregate. The study recommends ANNs models application as possible alternative for green concrete trial mix design. Sustainable techniques such as low-cost superplasticizers from recycled material and cost-effective technologies to adequately sizing and shaping plastic for fine aggregate application should be encouraged, so as to enhance strength of concrete with partial plastic aggregates.

Palavras-chave : Plastic; fine aggregates; compressive strength; prediction; concrete: artificial neural network; reviews.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )