Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Revista Ingenierías Universidad de Medellín
versión impresa ISSN 1692-3324versión On-line ISSN 2248-4094
Resumen
RONDON QUINTANA, Hugo Alexánder; RODRIGUEZ RINCON, Edgar y MORENO ANSELMI, Luis Ángel. MECHANICAL RESISTANCE OF HOT THICK MIXTURES MADE WITH ASPHALT MODIFIED WITH POLYVINYL CHLORIDE, POLYCLORURE (PVC) WASTES, HIGH DENSITY POLYETHYLENE (PEAD), AND POLYSTYRENE (PS) EVALUATED IN MARSHALL ASSAY. Rev. ing. univ. Medellin [online]. 2007, vol.6, n.11, pp.91-104. ISSN 1692-3324.
The main objective of this research Project was to evaluate in a laboratory the change in mechanical strength that dense hot asphalt mixtures go through when waste polymeric additives of plastomeric type (polyvinyl chloride, high density polyethylene and polystyrene) are added to asphalt cement, by 'wet way'. This change was evaluated using Marshall Test. The general conclusion of the experimental results was that modified hot asphalt mixtures present better mechanical behavior than conventional mixtures (mixtures which use asphalt without additives).
Palabras clave : Modified asphalts; vinyl polychlorure; and high density polyethylene; polystyrene.