Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
Revista Ingenierías Universidad de Medellín
versão impressa ISSN 1692-3324versão On-line ISSN 2248-4094
Resumo
RODRIGUEZ, Juan C.; DEL PORTILLO Z, Diego e SANCHEZ TORRES, Germán. Selección de centros de interpolacion mediante agrupamiento jerárquico basado en curvatura. Rev. ing. univ. Medellín [online]. 2010, vol.9, n.17, pp.131-138. ISSN 1692-3324.
It is widely known that some fields related to graphic applications require realistic and full detailed three-dimensional models. Technologies for this kind of applications exist. However, in some cases, laser scanner get complex models composed of million of points, making its computationally difficult. In these cases, it is desirable to obtain a reduced set of these samples to reconstruct the function's surface. An appropriate reduction approach with a non-significant loss of accuracy in the reconstructed function with a good balance of computational load is usually a non-trivial problem. In this article, a hierarchical clustering based method by the selection of center using the geometric distribution and curvature estimation of the samples in the 3D space is described.
Palavras-chave : clustering; point simplification; range data.