SciELO - Scientific Electronic Library Online

 
vol.10 número18Protocol for measure noise emission from stationary sourcesTools for reliability analysis in geotechnical engineering: The theory índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Ingenierías Universidad de Medellín

versão impressa ISSN 1692-3324versão On-line ISSN 2248-4094

Resumo

GIRALDO A., William A.  e  GONZALEZ FERNANDEZ, Alice Elizabeth. Unit timing for environmental noise measurements. Rev. ing. univ. Medellín [online]. 2011, vol.10, n.18, pp.61-68. ISSN 1692-3324.

The managers of environmental noise measurements in environmental control agencies, or in general every person that work in this subject, have to think on the representativity of the unit measurement time interval, and how to evaluate it in order to get good quality results regarding the unit measurement time without increasing the measurement costs. A methodology for deciding if a certain measuring time interval -in this case, fifteen (15) minutes- is representative of noise pressure levels occurring during one hour, is proposed in this paper. This methodology allows to optimize the use of stationary sound level meters and to propose a strategy for reducing the costs of environmental noise measurements and of the designing of noise maps in general.

Palavras-chave : nivel de presión sonora; Environmental noise; Measurement time interval; Sound level pressure.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons