SciELO - Scientific Electronic Library Online

 
 issue20DIMENSIONAL MODELING OF ICT COMPETENCIESASSOCIATION OF THREE SNPS WITH SOME PRODUCTION AND QUALITY CHARACTERISTICS OF HOLSTEIN CATTLE MILK IN ANTIOQUIA, COLOMBIA author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Revista EIA

Print version ISSN 1794-1237

Abstract

ECHAVARRIA LOPEZ, Beatriz Adela  and  ECHAVARRIA LOPEZ, César Augusto. DISTANCIAS A LOS EXTREMOS EN CONEXIONES PERNADAS DE MADERA. Rev.EIA.Esc.Ing.Antioq [online]. 2013, n.20, pp.55-61. ISSN 1794-1237.

This paper examines the influence of the end distances on the occurrence of stress concentrations in timber bolted joints. The effect of the anisotropic character of the wood on the stress distributions was also analyzed. The use of a theoretical model based on the method of the complex functions to calculate the stresses in a timber joint is presented. Minimum edge and end distances as identified in various design codes for timber bolted joints loaded parallel-to-grain are shown. Perpendicular-to-grain tensile stress concentrations for some softwoods and hardwoods are presented. Reducing the end distance does influence the magnitude of the tensile stress concentrations. It is established analytically that when adequate distances are used at the sides of the bolted timber joint its behavior is explicitly ductile.

Keywords : Bolted Timber Joints; Splitting Failure Mode; Shear-plug Failure Mode.

        · abstract in Spanish | Portuguese     · text in Spanish     · Spanish ( pdf )