Resumen

NING, Sun; GUANG, Fu; LILI, Liu  y  JINGFENG, Wu. Unconsolidated fault vertical sealing ability evaluation method and its application during Stationary phase. Earth Sci. Res. J. [online]. 2019, vol.23, n.1, pp.35-42. ISSN 1794-6190.  https://doi.org/10.15446/esrj.v23n1.78831.

To study the vertical distribution of oil, gas in the fracture zone of the oil and gas bearing basin, based on the mechanism and influence factors of vertical sealing oil and gas, this paper has studied the necessary conditions of unconsolidated fault vertical sealing oil, gas, determination method for compaction and diagenetic of the fault filling. Concluded that the static period of fault vertical sealing oil and gas required that fault should be cut by mudstone, through comparing the relative period of the fault rock starting consolidate and the fault stopping activity to determine whether the fracture fillings are compacted into rock. If the time fault rocks began compaction into rock is earlier than the time fault stopped activity, fault filling has been consolidated; otherwise not compaction. By determining the displacement pressure of the fracture filling material and the rock displacement pressure of the underlying reservoir, a method is established to evaluate static unconsolidated fault vertical sealing oil and gas ability by comparing the relative size of the two. Applied it in the evaluation of the vertical sealing capacity f1 in the one to three sections of the Dongying formation and 5 sections of the formation in the southern Bohai Bay Basin. The results show that the fault f1 in one to three of the Dongying formation have the greater filler displacement pressure than the displacement pressure of underlying reservoir rock, as the vertical sealed is favorable for oil and gas accumulation and preservation. It’s accordant with oil and gas distribution has been found in Dongying formation at present in the formation of the South Fort 5 structure, which indicates that the method is feasible to evaluate the vertical sealing ability of the fault in the stationary phase.

Palabras clave : Stationary phase; Unconsolidated; Fault; Vertical sealing; Evaluation method.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )