SciELO - Scientific Electronic Library Online

 
vol.7 número1Determinação e quantificação dos níveis de compostos organoclorados em leite pasteurizada índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Producción + Limpia

versão impressa ISSN 1909-0455

Resumo

MORENO, Anderson; FIGUEROA, Danilo  e  HORMAZA, Angelina. Adsorption of methylene blue on rice hulls by. Rev. P+L [online]. 2012, vol.7, n.1, pp.9-18. ISSN 1909-0455.

Introduction. The contamination produced by the download of industrial effluents, especially from textile, food and paint industries, not only affects ecosystems due to its aesthetic degradation, but, above all, to the reduction of photosynthetic processes. Dyes, due to their aromatic structure, are characterized by their difficult and slow degradation, thus generating accumulations and becoming a contamination source that can even be carcinogenic for some molecules. Adsorption on agricultural wastes appears as an innovative alternative, environmentally favorable and very efficient to treat those dyed effluents. Objective. To find the conditions which allow an efficient removal of the methylene blue dye on rice hulls by the use of the statistical design of experiments and compositionally and structurally analyze the adsorbent material. Materials and methods. The best conditions of the adsorption process were determined under a discontinuous system, evaluating an interval of the variables pH value, dosage of the adsorbent, dye concentration and contact time. The temperature, the agitation and the size of the particles were constant. The dye content was quantified by the use of Ultraviolet-Visible spectro-photometry. Results. A maximum removal of 99% was obtained at pH 9.0, 3.5 mgL-1 dosage, 10 mgL-1 of concentration and 163 minutes of contact time, with a good adjustment to the statistical models (R2 = 0.92) and with no bias in the measuring. Conclusions. The statistical design was useful to establish the conditions necessary to achieve a high efficiency to remove the methylene blue dye on rice hulls. It also proved that this agricultural waste is a remarkable material to scale the process in a later phase.

Palavras-chave : adsorption; methylene blue; rice hulls; dyed effluents; factorial design surface analysis.

        · resumo em Português | Espanhol     · texto em Espanhol     · Espanhol ( pdf )