Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Revista Ingeniería Biomédica
versión impresa ISSN 1909-9762
Resumen
AMADOR, Belkys T. et al. METHODOLOGY TO GAUGE A FOUR-BAR LINKAGE PROSTHETIC KNEE MECHANISM BASED ON GAIT ANALYSIS AND GENETIC ALGORITHMS. Rev. ing. biomed. [online]. 2012, vol.6, n.11, pp.30-45. ISSN 1909-9762.
This research was aimed to develop a methodology for establishing the proper dimensions of a four-bar linkage prosthetic knee mechanism for maximum stability. Based on the fact that the stability of a four-bar knee during load-bearing is determined by the location of the instantaneous center of rotation (ICR) with respect to the ground reaction force (GRF) vector, a computational platform was developed to simulate the movement of the leg, the GRF vector and the position of the ICR of the mechanism. On one hand, a gait analysis was carried out on a subject with unilateral transfemoral amputation, from which the GRF, the knee flexion-extension angle and the kinematics of the lower limbs were determined. On the other hand, genetic algorithms (GAs) technique provided the dimensions and mechanism links configuration required to iterate with the platform on which, comparing the location of the GRF and the ICR in the sagittal plane, the functional dimensions of the mechanism were obtained. The polycentric knee mechanism was gauged successfully by ensuring knee stability during the initial contact and load response as well as the ability to initiate voluntary flexion toward late stance before the toe-off.
Palabras clave : Gait analysis; Genetic algorithms; Ground reaction force; Instantaneous center of rotation; Polycentric knee mechanism.