SciELO - Scientific Electronic Library Online

 
vol.81 issue186Applying TOC Heuristics to Job Scheduling in a Hybrid Flexible Flow ShopA framework for consistences in association relations between classes in UML author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Dyna rev.fac.nac.minas vol.81 no.186 Medellín July/Aug. 2014

https://doi.org/10.15446/dyna.v81n186.39554 

http://dx.doi.org/10.15446/dyna.v81n186.39554

Apparent molar volume and modeling of volumetric properties of ionic liquid aqueous solutions 1-butyl-3-metilmidazolium chloride [Bmim+][Cl-] at various temperatures

Volumen molar aparente y modelamiento de propiedades volumétricas de soluciones acuosas del líquido iónico cloruro de 1-butil-3-metilmidazolio [Bmim+][Cl-] a varias temperaturas

 

Manuel Páez-Mezaa, Omar Pérez-Sierrab & Yeris Cuello-Delgadoc

 

a Facultad de Ciencias, Universidad de Córdoba, Colombia. mspaezm@gmail.com
b Facultad de Ingeniería, Universidad de Córdoba, Colombia. omiel25@hotmail.com
c Facultad de Ciencias, Universidad de Córdoba, Colombia. yeriscuello@gmail.com

 

Received: August 20th, de 2013. Received in revised form: May 5th, 2014. Accepted: May 26th, 2014

 


Abstract
Densities of the aqueous solutions of ionic liquid 1-butyl-3 metilmidazolium chloride [Bmim+][Cl-] were determined using a vibrating tube densitometer Anton Paar DMA 5000 at a temperature range between (283.15 - 218.15) K. The apparent molar volumes of aqueous chloride1-butyl-3-methylimidazolium were calculated and adjusted to the Pitzer ion interaction model, obtaining the limiting apparent molar volumes and Pitzer volumetric parameters  at temperatures of 283.15, 288.15, 293.15, 298.15, 303.15, 313.15 and 318.15K, proving that this model adequately represents the experimental volumetric data below an ionic strength of 0.6018 mol / kg. Finally the limiting apparent molar expansibilities  were calculated from the limiting apparent molar volumes at various temperatures and the results are discussed in terms of the interactions occurring in solution.

Keywords: apparent molar volume, Pitzer parameters, density, limiting expansibilities, ionic liquid.

Resumen
Se determinaron las densidades de las soluciones acuosas del líquido iónico Cloruro 1-butil-3 metilmidazolio [Bmim+][Cl-]  utilizando un densímetro de tubo vibrador Anton Paar DMA 5000 entre 283,15 y 218,15 K. Se calcularon y ajustaron los volúmenes molares aparentes  del cloruro de 1-butil-3-metilimidazolio acuoso al modelo de interacción iónica de Pitzer y se obtuvieron los volúmenes molares aparentes límites y los parámetros volumétricos de Pitzer  a las temperaturas de (283.15, 288.15, 293.15, 298.15, 303.15, 313.15 y 318.15)K; comprobándose que este modelo representa adecuadamente los datos volumétricos experimentales por debajo de una fuerza iónica de 0,6018 mol/kg. Finalmente a partir del volumen molar aparente límite  determinado a varias temperaturas, se calcularon las expansibilidades molares aparentes límites y los resultados se discutieron en términos de las interacciones que ocurren en solución.

Palabras clave: Volumen molar aparente, parámetros de Pitzer, densidad, expansibilidades límites,  liquido iónico.


 

1.  Introduction

Although the scientific literature and patents reserve the term "Ionic Liquid" to designate the compounds that are exclusively composed of ions that are liquid at moderate temperatures (e.g. lower than 100°C) [1], some of them, as is the case of 1-butyl-3-metilimidazolium chloride [Bmim+] [Cl-], are solid at room temperature.

It is well known that the liquid mixtures of different compounds form solutions that do not usually behave ideally. The interpretation of no ideality is a very interesting topic, therefore, nowadays a large number of contributions have been made, especially related to the modeling of volumetric properties.

However, there is a compelling reason for studying mixed ionic liquids, this is due to the fact that these individual compounds tend not to show, at the same time, a greater selectivity and extraction capacity compared to that of conventional organic solvents [2-7] in several processes such as: The recovery of solvents (acetone, ethanol, and butanol) from fermentation broth [2-4], the extraction of antibiotics [2-5], and the elimination of organic pollutants from aqueous waste streams [5].

It has been established that the volumetric behavior of solutions of electrolytes and non-electrolytes may provide useful information about the solute-solvent and solute-solute interactions.  In this sense and because ionic liquids can be considered ionic compounds; since they exhibit a similar behavior to the inorganic salts in aqueous solutions, they dissociate partially or completely in water, and are exclusively formed by hydrophobic or hydrophilic ions depending on the structure of the cation and/or anion; their mixtures with other substances are attractive systems for such analysis. That is why expansibilities of solute, partial molar volumes and apparent molar volumes have shown to be very useful tools in the interpretation of molecular interactions occurring in solution [8].

On the other hand, it is well known that due to their structure and ionic interactions, ionic liquids and their mixtures exhibit unique properties.  Strong ion-ion interactions present in ionic liquids lead to highly organized three-dimensional supramolecular polymer networks of cations and anions joined by hydrogen bonds and/or Coulomb interactions; where the force of ion-ion interaction depends on the structure of ionic liquid and can greatly affect the ability of the individual components (anions or cations) to interact with dissolved species [9].

However, despite its interest and importance, the information about the physico-chemical properties of mixtures of ionic liquids with molecular solvents is very limited, even though this information is extremely important for different technological processes, such as the design of solvents and other processes previously mentioned in the preceding paragraphs [10].

The present work is oriented towards obtaining a set of precise measurements of density and apparent molar volumes of [Bmim +] [Cl-] in an aqueous environment, the allowable range of solubility and the range of temperature (283.15-318.15) K every 5 degrees.  At the same time we seek to predict and correlate these volumes with the model of the Pitzer ion interaction.

 

2.  Experimental part

Reagents used were: 1-butyl-3-methylimidazolium chloride (fraction of mass>0.99), purchased from the trading house Across Organic (99% purity) and doubly distilled and deionized water (conductivity less than 2mS) in accordance with the recommendations of the literature [11, 12].

The solutions were prepared gravimetrically using a balance (OHAUS Explorer model) with a sensitivity of ±1x10-4 g, in tightly closed bottles to prevent loss by evaporation of some of the components. The experimental uncertainty estimate for the molalities was ± 0.0002. Experimental densities in the diluted region of aqueous solutions of [Bmim+][Cl-] were measured using a vibrating tube digital densimeter Anton Paar DMA 5000, in the range of temperature (283.15-318.15) K and at an atmospheric pressure of 0.10 MPa. The cell of the DMA was calibrated with dry air and ultra-pure water at atmospheric pressure. The samples were thermostated and controlled at ± 0.001 K. The uncertainty values of certain densities were ± 0.2 x 10-5 g/cm3.

Since the [Bmim+][Cl-] is a solid at the conditions of temperature and pressure in which the data were taken, it was impossible to obtain densities and viscosity information about this pure IL.  Therefore  densities of the binary mixtures [Bmim+][Cl-] + H2O at 308.15 K were compared to the density data previously reported in literature [13], which showed to be similar, as shown in Fig. 1.

 

3.  Results and discussion

The experimental values of densities, r (.cm-3 g), measured at different temperatures and molalities, (mol • kg-1), are shown in Table 1.

The values obtained for the  apparent molar volumes and molal concentrations () [Bmim+] [Cl-] ranging from 283.15 to 318.15 K are shown in Table 2.

The apparent molar volume  (cm3. mol-1) of a solute with molar mass, M2 (g•mol-1), is given by

Where r0 is the density of pure water and m is the molality of [Bmim+][Cl-] in (mol•kg-1)

The apparent molar volume of [ Bmim +][Cl-] in an aqueous solution, can be expressed by the Pitzer ion interaction model, which is an extension of the theory limit of Debye-Hückel which applies to very low concentrations; according to this model, ions of the same charge tend to stay away from each other and therefore short range forces would have very few consequences. Contrary to ions of opposite charge, which approach as close as possible, being affected by short range forces. This model is described by the following equations. [14-17]

Where the Ionic interaction parameters, are given by

The numerical values recommended for coefficients b and a are as follows: b=1.2 kg½ mol-1/2 for electrolytes of all types of charge; a1=2.0 kg½ mol-1/2 type 1:1 1:2 and 2:1 electrolytes; a1=1.4 kg½ mol-1/2 y a2=12 kg½ mol-1/2 for type 2:2 electrolytes; the coefficient is assumed to be equal to zero for electrolytes of all charges, except type 2:2 electrolytes. The coefficients a1, a2 y b, are accepted as independent of temperature, which leads to equation 2 to be expressed in the following way for the [Bmim+][Cl-].

Rearranging the equation above, we obtain the right work equation for the system under study.

Or by the following way

Where Y is the function to correlate from experimental data, and it is given by:

According to this model, it is clear that the molar volume apparent pressure and constant temperature of each Ionic liquid in diluted solutions will depend only on the properties of the solvent and of the total concentration or the ionic strength of the solution.

Parameters, carry out a similar role to the first, second and third virial coefficients, that is why they characterize the forces of interaction of short range between the anion and cation of the ionic liquid. Both parameters of the molar volume of apparent limit shown in Table 3, were obtained by minimization of the function.

Where n is the number of experimental points and  p  is the number of adjustable parameters.  The correlated and predicted results from experimental data measured in this study are presented as the residual, DVf = Vfexp-Vfcal in Table 4. An example of the behavior is illustrated in Fig. 2, the correlated and predicted results at temperature of 288.15 K.  As previously observed, both results agree presenting a good precision. 

Where T is the temperature in Kelvin degrees, and where a, b, and c are empirical constants dependent on the solute and solvent.

The partial molar expansibilities limits are obtained by differentiation of the above equation with respect to temperature

In Table 5, the values of limiting apparent molar volumes obtained by the methods of Redlich Meyer and Pitzer were reported:

Where the first ones were obtained by correlating the defined term using the relation  in function of m2, which is in accordance with the equation of Redlich Mayer.

Here bV is an empirical parameter characteristic of ionic liquid and m2 is the molality of the ionic liquid and SV is the theoretical slope limit of Debye Hückel, which depending on the temperature t (°C) is given by the expression [18].

The reason for using the equation of Redlich-Mayer is essentially the same one that the Pitzer ion interaction model used, i.e., it is applied to analyze volumetric data of diluted electrolyte solutions.

While the second ones are obtained as a result of the correlation of the Pitzer ion interaction model, which are implicitly contained in the setting parameter ao, previously determined by this model.

The analysis of the results displayed in Table 5 shows that both results are very similar; the reason for this is possibly due to the fact that the SV term of the Redlich Mayer equation depends on a variable of the Debye Hückel limiting law, which is characteristic of aqueous solvents and is also contained in the Pitzer ion interaction model, this makes both methods to converge at the same limit.

It can be verified that the values of the apparent ionic liquid  limiting expansibility coefficient [[Bmim+][Cl-] according to Table 5, decrease linearly with the increase of temperature with a slope equal to,

The fact that  linearly decreases with a temperature increase means that the second derivative of  with respect to temperature is also negative.  In concordance with Hepler [18], it is evident that the studied ionic liquid behaves as a substance capable of disrupting the three-dimensional structure of water in the studied temperature range.

 

4.  Conclusions

Densities of the binary system [Bmim+][Cl-] + H2O were determined using a vibrating tube densitometer Anton Paar DMA 5000 at temperatures of K (283.15, 288.15, 293.15, 298.15, 303.15, 313.15, and 318.15). The experimental data were correlated and predicted through the use of the Pitzer ion interaction model.  A good correlation can be observed between the predicted values and those measured experimentally in working conditions. Small standard deviations, s, show that the Pitzer ion interaction model is appropriate for the representation of the volumetric properties of aqueous solutions of ionic liquids.

 

Acknowledgments

The authors thank the Universidad de Córdoba for the support provided for the realization of this work.

 

References

[1] Romero, A. S., Ionic Liquids at environmental temperature: A new solution for chemical reactions. (Esp) Rev.r.acad.cienc.exact.fis.nat., 102, pp. 79-90, 2008.         [ Links ]

[2] Smirnova, V. S., Torocheshnikova, I. I., Formanovsky, A. A. and Pletnev, I., Solvent extraction of amino acids into a room temperature ionic liquid with dicyclohexano-18-crown-6. V, Anal. Bioanal. Chem., 378, pp. 1369-1375, 2004.         [ Links ]

[3] Huddleston, J. G., Willauer, H. D., Swatloski, R. P., Visser, A. E. and Rogers, R. D., Room Temperature Ionic Liquids as Novel Media for 'Clean' Liquid-Liquid Extraction. Chem. Commun., 16, pp. 1765-1766, 1998.         [ Links ]

[4] Fadeev, A. G. and Meagher, M. M., Opportunities for ionic liquids in recovery of biofuels. Chem. Commun., pp. 295-296, 2001.         [ Links ]

[5] McFarlane, J., Ridenour, W. B; Luo, H., Hunt, R. D., DePaoli, D. W. and Ren, R. X., Room temperature ionic liquids for separating organics from produd water. Sep. Sci. Technol., 40, pp. 1245-1265, 2005.         [ Links ]

[6] Soto, A., Arce, A. and Khoskbarchi, M. K., Partitioning of antibiotics in a two-liquid phase system formed by water and a room temperature ionic liquid. Sep. Purif. Technol., 44, pp. 242-246, 2005.         [ Links ]

[7] Ventura, S. P. M., Neves, C. M. S. S., Freire, M. G., Marrucho, I. M., Oliveira, J. and Coutinho, J. A. P., Evaluation of Anion influence on the formation and extraction capacity of Ionic-Liquid-Based Aqueous biphasic systems. J. Phys. Chem B., 113, pp. 9304-9310, 2009.         [ Links ]

[8] Cveto, K., Jaka, H., and Darja, Rudan-T., Apparent Molar volume and Apparent molar expansibility of sodium saccharin, potassium Acesulfame and aspartame, Acta Chim. Slov., 53, pp. 274-283, 2006.         [ Links ]

[9] Chiappe, C., Malvaldi, M., and Pomelli, C. S., Ionic liquids: Solvation ability and polarity. Pure Appl. Chem., 81, pp. 767-776, 2009.         [ Links ]

[10] Vercher, E., Orchille's, A. V., Miguel P. J., and Martínez, A., Volumetric and Ultrasonic studies of 1-Ethyl-3 methylimidazolium Trifluoromethanesulfonate Ionic liquid with methanol, ethanol, 1propanol, and water at several temperaturas. J. Chem. Eng. Data., 52, pp. 1468-1482, 2007.         [ Links ]

[11] Weissberger A., Tecniques of Chemistry, Vol I, Parte 4: Methods of Chemistry, Wiley Intercience New York.         [ Links ]

[12] Weissberg, A., Rositer, B., Physical Methods of Chemistry. New York: Willey - Interscience, 1957.         [ Links ]

[13] Yang, Q., Zhang, Hai., Su, B., Yang, Y., Ren, Qilong., and Xing, H., Volumetric properties of binary mixtures of 1-butyl-3-methylimidazolium Chloride + water or hydrophilic solvents at different temperatures. J. Chem. Eng. Data., 55, pp. 1750-1754, 2010.         [ Links ]

[14] Yang, J., Tong, Jing., Li J., Study of the Volumetric properties of the aqueous ionic liquid 1-methyl-3-pentylimidazolium Tetrafluoroborate. J Solution Chem., 36, pp. 573-582, 2007.         [ Links ]

[15] Song, G. J., Properties of room temperature ionic liquid 3-ethyl-1-methylimidazolium ethyl sulfate, ЖУРНАЛ ФИЗИЧЕСКОЙ ХИМИИ., 84, pp. 859-864, 2010.         [ Links ]

[16] Kenneth, S., Pitzer, J,. Peiper C., and Busey, R. H., Thermodynamic Properties of aqueous sodium chloride solutions. J. Phys. Chem. 13(1), 1984.         [ Links ]

[17] Krumgalz, B. S., Pogorelskii, R., Sokolov, A. and Pitzer K.S., Volumetric ion interaction parameters for single- solute aqueous electrolyte solutions at various temperatures. J. Phys. Chem., 29 (5), 2000.         [ Links ]

[18] Hepler, L. G., Thermal expansion and structure in water and aqueous solutions. Can. J. Chem., 47, pp. 4613-4617, 1969.         [ Links ]

 

M. S. Páez-Meza, graduated in 1987 with a Bs in Chemistry from the Universidad de Córdoba, Colombia.  In 1996 he graduated as Sp. in Physical Sciences; in 2001 he graduated as a MSc in Chemical Sciences; in 2007 he graduated with a Dr. in Chemical Sciences from the Universidad Nacional de Colombia. Since 1996, he serves as a full professor at the Universidad de Córdoba, in both: undergraduate and postgraduate programs. He also serves as leader of the research group: Physical Chemistry of Mixed Liquids in the Universidad de Córdoba, Colombia.

Y. Del C. Cuello-Delgado, graduated in 2007 in Chemistry and received a MSc in Chemical Sciences in 2013, both titles from the Universidad de Córdoba, Colombia. She is currently teaching at the Universidad de Córdoba, in undergraduate programs. Also she serves as a student researcher in the study group: Physical Chemistry of Mixed Liquid in the Universidad de Córdoba, Colombia.

O. A. Pérez-Sierra, graduated a Bs. Eng in Chemical Engineering in 1994 from the Universidad de Atlántico, in Barranquilla, Colombia, obtained a MSc in Chemical Engineering in 1997 from the Universidad Industrial de Santander (UIS), in Bucaramanga, Colombia, and a Dr. of Science and Food Technology from the Federal University of Viçosa, in Viçosa, Brazil.  He has been part of the Universidad de Córdoba teaching staff since 1997. He is a full professor in the Department of Food Engineering of the Universidad de Córdoba. His research interests include: Modeling and simulation of processes, bio-separations and unit operations.