SciELO - Scientific Electronic Library Online

 
vol.85 issue205Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steelEffect of the tryptone concentration on the calcium carbonate biomineralization mediated by Bacillus cereus author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Dyna rev.fac.nac.minas vol.85 no.205 Medellín Apr./June 2018

https://doi.org/10.15446/dyna.v85n205.60221 

Artículos

Verification of the vibrational theoretical assignment of the DADP using isotopic labelling

Verificación de la asignación vibracional teórica de DADP usando marcaje isotópico

Eduardo Espinosa-Fuentesa  b 

Edgardo Meza-Fuentesc 

Fredy Colpas-Castillod 

John R. Castro-Suareze 

Gilberto Chiquillo-Corread 

Malka Moraf 

a Grupo GESSA, Departamento de Ingeniera Civil y Ambiental, Corporación Universidad de la Costa, Barranquilla, Colombia.

b Grupo de investigación GIDE Universidad Libre, Barranquilla, Colombia. eduardo.espinosa.fuentes@gmail.com

c Grupo de Carboquímica, Universidad de Cartagena, Cartagena, Colombia. emezaf@unicartagena.edu.co

d Grupo de Estudios en Materiales y Combustibles, Universidad de Cartagena, Cartagena, Colombia. fcolpasc1@unicartagena.edu.co

e Grupo KUAGRO, Fundación Universitaria Colombo Internacional-UNICOLOMBO, Cartagena, Colombia. jhoncs54@yahoo.com.mx

f Departamento de Ciencias Exactas y Naturales, Corporación Universidad de la Costa, Barranquilla, Colombia. mmora10@cuc.edu.co


Abstract

This work deals with the comparison of the theoretical assignment of the DADP vibrational spectrum with the experimental displacements by isotopic labeling. For this, the DADP-C4 and DADP-C2 isotopomers were synthesized from acetone labeled isotopically in the methyl and the carbonyl carbon atoms, respectively. The acetone and DADP-isotopomer compounds were characterized using Raman and infrared spectroscopy. Theoretical assignments were taken from previous studies on the potential energy distribution of a vibrational mode, which provide an approach to the internal coordinates related to each band. The selective isotopic labeling allowed us to approach to the dependence of each band, because the energy of a molecular vibration also depends on the reciprocal mass of the atoms involved. In general, the results showed that some bands assigned experimentally do not coincide with the theoretical assignments by quantum mechanical simulations.

Keywords: diacetone diperoxide; isotopomer; Raman and infrared spectroscopy; molecular vibration

Resumen

Este trabajo trata sobre la comparación de la asignación teórica del espectro vibracional de DADP con los desplazamientos experimentales por marcación isotópica. Para ello, se sintetizaron los isotopómeros DADP-C4 y DADP-C2, los cuales son isotopómeros parcialmente marcados. DADP-C4 y DADP-C2 fueron sintetizados a partir de acetona marcada isotópicamente en los átomos de carbonos del grupo metilo y carbonilo, respectivamente. La acetona y los compuestos isotopómeros de DADP fueron caracterizados usando espectroscopia Raman e Infrarroja. Las asignaciones teóricas fueron tomadas de estudios previos sobre la distribución de energía potencial de un modo vibracional, el cual proporciona una aproximación a las coordenadas internas relacionadas con cada banda vibracional. La marcación isotópica selectiva nos permitió acercarnos a la dependencia de cada banda, debido a que, la energía de una vibración molecular depende también de la masa recíproca de los átomos involucrados. En general, los resultados mostraron que algunas bandas asignadas experimentalmente no coinciden con las asignaciones teóricas mediante simulaciones mecánicas cuánticas.

Palabras clave: diacetona diperóxido; isotopómero; espectroscopia Raman e infrarroja; vibración molecular

1. Introduction

Although, the organic peroxides are widely used as bleaching agents, antibacterial and polymeric initiators, the current interest on these substances lies in the application of these derivatives as explosive initiators [1]. Particularly, the compounds diacetone diperoxide (DADP) and triacetone triperoxide (TATP), are the most common acetone peroxides for the synthesis of homemade explosives (HME), and for this reason they are of interest for defense and national security applications. Their easy synthesis from the reaction of hydrogen peroxide with acetone catalyzed by acid, together with the high availability of the basic products make them attractive precursors for the preparation of homemade explosive materials [1-6].

Due to the great instability presented by these materials they are not normally used for military purpose, but rather for criminal purposes, therefore their identification and proper detection becomes of great importance [7]. Although there are many studies on the TATP molecule, the DADP molecule has a feature that makes it more attractive for the design of energetic materials; this fact is because the oxygen atoms in the molecule are more accessible than in the TATP, which enables them to be easily functionalized [8].

For many years, the infrared and Raman spectra have been used for the identification and structural elucidation of organic molecules due to its potential to provide vibrational information on what type of atoms are involved in a particular bond, these techniques prevail as one of the most commonly used for the characterization of DADP and others compounds of interest. In most of the studies described, the band assignment is done theoretically, or by isotopic labeling of hydrogen atoms with deuterium atoms. With this type of isotopic labeling is not achieved the strategic labeling of the carbon atoms involved in the different vibrational modes [3,9-12].

This research deals with the assessment of the theoretical assignment of the different bands in the vibrational spectrum of the DADP molecule. This verification was made through partial isotopic labeling of the different carbon atoms in the molecule, thus achieving, the corresponding displacement in the bands involved. Use Time New Roman font with size of 10 points for normal text paragraphs. The first line of each paragraph is indented 0.5 cm.

2. Experimental setup

2.1. Reagents

The reagents used in the synthesis of the DADP isotopomers were: acetone-13C, acetone-13C2, and neat acetone at 99.7%, hydrogen peroxide stabilized at 50%, ultra-pure water, m-sulphonic and toluene-sulphonic acids. Dichloromethane at 99.8% stabilized HPLC grade. All the reagents listed above were purchased in Fisher Scientific and used without further purification.

2.2. Synthesis of DADP

DADP and its isotopomers was prepare using a modified procedure of the reported by Espinosa-Fuentes et al, which consists in the oxidation of acetone with hydrogen peroxide catalyzed by m-sulphonic or toluene-sulphonic acids [6]. The acetone labeled on the carbonyl carbon and the methyl carbons atoms were used for the synthesis of the DADP-C2 and DADP-C4 isotopomers respectively. The white crystals of DADP were washed with deionized water and recrystallized in dichloromethane. Immediately shows a reaction scheme.

Source: The authors.

Scheme 1 Synthesis route of DADP Source: Own elaboration 

2.3. Instrumental analysis

The infrared spectra were recorded in an infrared spectrophotometer with Fourier transformed, Bruker Optics brand, model IFS 66v/S, equipped with a DTGS detector, in the spectral region of 400 to 4000 cm-1, 10 scans per spectrum and a resolution of 4 cm-1 were used. The Raman spectra were recorded using a Raman spectrophotometer, EZ-Raman, equipped with an excitation line of 785 nm, in the spectral region of 400 to 3200 cm-1, 10 accumulations per spectrum and a resolution of 1 cm-1.

3. Results and discussion

To verify the assignment of each band in the vibrational spectra of the DADP molecule, it was taken as a basis the theoretical distribution reported by Coronel et al [10]. For DADP, a nonlinear molecule, the 3N-6 modes correspond to 50 vibrations. Before checking the theoretical assignment of each vibrational band, we will explain the relationship between the atoms in the molecule (see Fig. 1) with the internal coordinates and the distribution of the potential energy of a particular band. For this, was chosen the vibrational mode 44 (ν44), which has the following distribution of potential energy 50S2+44S1, this means that, the internal coordinates S1 and S2 contribute to the vibration energy in a percentage of 50 and 44 respectively. According to supplementary Table 1 and the molecular numbering of Fig. 1, the atoms involved in this vibration are H(14), H(13), H(12) and C-methyl(11) for S1 and S2: H(18), H(16), H(17) and C-methyl(15). For this particular band, is possible to corroborate experimentally its assignment, by labeling the methyl atoms. The isotopic labeling of a carbon atom different to the previous ones should not displace the band corresponding to Mode 44 (Table 1-2 of the supplemental material); if this happens, then the theoretical contribution is wrong.

Source: Gausview® and the authors.

Figure 1 Molecular structure of diacetone diperoxide. 

The theoretical energy distribution of the DADP spectrum presented several differences, regarding the experimental displacements of the isotopomers spectra (DADP-13C4 and DADP-13C2); among others, which agreed with the theoretical assignment. The bands at 3034, 3033, 2958, 3008, 1466, 1477, 1377, 1010, 943, 860, 687, 525, 476 cm-1 showed concordance with potential energy distribution (PED). These spectral bands correspond to the vibrational modes 20, 32, 2, 19, 45, 31, 3, 46, 45, 5, 48, 54, 37, 57, 58, 39 according to reported by Coronel et al [10]. These modes are related only with movements of the methyl group (C and H atoms) (Fig. 2-6).

Source: The authors.

Figure 2 First portion of the FT-IR spectra of: A-DADP-C4, B-DADP and C-DADP-C2.  

Source: The authors.

Figure 3 FT-IR spectra of: A-DADP-C4, B-DADP and C-DADP-C2. (a) at 1000-1500 cm-1 (b) at 2900-3050 cm-1 spectral range. 

Source: The authors.

Figure 4 First portion of the Raman spectra of: A-DADP-C4, B-DADP and C-DADP-C2.  

Source: The authors.

Figure 5 Second portion of the Raman spectra of: A-DADP-C4, B-DADP and C-DADP-C2.  

Source: The authors.

Figure 6 Last portion of the Raman spectra of: A-DADP-C4, B-DADP and C-DADP-C2 (a) at 2900-3100 cm-1 spectral range. (b) at 1000.1600 cm-1 spectral range. 

In contrast with the bands above, some differences were observed in the others assignments. For example, the band at 1439 cm-1, despite the fact that its theoretical contribution is only for methyl groups, when other atoms were isotopically labeled (specifically annular peroxyl carbons), the band showed a displacement of 7 cm-1 by change in its reduced mass. The above analysis demonstrates that the theoretical assignment is wrong and the peroxyl carbon atoms also contribute to vibrational mode.

The band at 1273 cm-1 (ν52), despite that its theoretical contribution includes methyl group and carbon atoms of the DADP ring, it only presented displacement, when carbon atoms of the ring were labeled isotopically. This result suggests that the methyl groups do not contribute to the mode ν52. The bands at 1205 cm-1, 1141 cm-1 and 951 cm-1 (ν35, ν23 and ν11) showed concordance in the response by mass variation of their correspondent groups. But the largest displacement was observed when the peroxyl carbon atoms of the ring were labeled isotopically, despite the methyl groups have greater contribution to the band.

The following difference was found in the assignment of the band at 931 cm-1 (ν55), which is entirely due to the methyl groups motions, however this mode presented displacement by mass change of the non-methylic atoms. The opposite happened with the bands at 841 cm-1, 833 cm-1, 761 cm-1, 687 cm-1, 525 cm-1, 496 cm-1, 337 cm-1, 312 cm-1 and 280 cm-1 (ν56, ν25, ν14, ν57, ν58, ν26, ν17, ν28 and ν18), which presented displacement only when methyl carbon atoms (DADP-C4) were labeled.

Finally, according to the theoretical PED, the band at 873 cm-1 is due to vibration of the O-O bond, therefore this band should not present any mass-shift in the spectra of the DADP isotopomers, however, the spectrum of both isotopomers showed vibrational displacement, specifically with the methyl and peroxyl carbon atoms. The band at 860 cm-1 also showed dependence with the methyl group, despite that the theoretical distribution does not consider it.

Over the years have been shown that the theoretical methods are a useful tool for understanding certain complex problems. However, in this report was observed that, the theoretical method is fairly efficient for movements of pure groups. For vibrational movements involving various functional groups, the method does not work well. For example, fairly predicts mappings between methyl atoms, nor it predicts vibrations between methyl atoms and peroxyl carbon atoms in the molecule studied.

4. Conclusions

In general, the theoretical method for the assignment of vibrational bands is fairly efficient for pure group’s movements. For vibrational movements involving various functional groups, the method works with some difficulty. For example, barely predicts combined assignment between methyl atoms, but does not predict vibration between methyl atoms and peroxyl carbon atoms in the molecule studied. For peroxyl displacements, which are not totally pure, the theoretical PED was unable to predict its contribution. Finally, it is important that the vibrational assignment is based on strategic isotopic marking and not in theoretical assignments, for the unequivocal acceptance in applied research.

References

[1] Landenberger, K.B., Bolton, O. and Matzger, A.J., Energetic-energetic cocrystals of diacetone diperoxide (DADP): dramatic and divergent sensitivity modifications via cocrystallization, Journal of the American Chemical Society, 137(15), pp. 5074-5079, 2015. DOI: 10.1021/jacs.5b00661. [ Links ]

[2] Pena, A.J., Pacheco-Londono, L., Figueroa, J., Rivera-Montalvo, L.A., Roman-Velazquez, F.R. and Hernandez-Rivera, S.P., Characterization and differentiation of high energy cyclic organic peroxides by GC/FT-IR, GC-MS, FT-IR, and Raman microscopy, Proc. SPIE, 5778, pp. 347-358, 2005. DOI: 10.1117/12.604194. [ Links ]

[3] Oxley, J., Smith, J., Brady, J., Dubnikova, F., Kosloff, R., Zeiri, L. and Zeiri, Y., Raman and infrared fingerprint spectroscopy of peroxide-based explosives, Applied Spectroscopy, 62(8), pp. 906-915, 2008. [ Links ]

[4] Jensen, L., Mortensen, P.M., Trane, R., Harris, P. and Berg, R.W., Reaction kinetics of acetone peroxide formation and structure investigations using Raman spectroscopy and X-ray diffraction, Applied spectroscopy, 63(1), pp. 92-97, 2009. [ Links ]

[5] Matyáš, R. and Pachman, J., Study of TATP: influence of reaction conditions on product composition. Propellants, Explosives, Pyrotechnics, 35 (1), pp. 31-37, 2010. DOI: 10.1002/prep.200800044 [ Links ]

[6] Espinosa‐Fuentes, E.A., Pacheco‐Londoño, L.C., Barreto‐Cabán, M.A. and Hernández‐Rivera, S.P., Novel Uncatalyzed Synthesis and Characterization of Diacetone Diperoxide, Propellants, Explosives, Pyrotechnics , 37(4), pp. 413-421, 2012. DOI: 10.1002/prep.201000130 [ Links ]

[7] Bellamy, A.J., Triacetone triperoxide: its chemical destruction, Journal of Forensic Science, 44(3), pp. 603-608, 1999. DOI: 10.1520/JFS14517J [ Links ]

[8] Wappel, J., Grudzień, K., Barbasiewicz, M., Michalak, M., Grela, K. and Slugovc, C., Initiation efficacy of halo-chelated cis-dichloro-configured ruthenium-based second-generation benzylidene complexes in ring-opening metathesis polymerization, Monatshefte für Chemie-Chemical Monthly, 146(7), pp. 1153-1160, 2015. DOI: 10.1007/s00706-015-1494-8. [ Links ]

[9] Jubert, A.H., Diez, R. and Cafferata, L.F.R., Experimental and theoretical studies of the vibrational spectra of 3, 3, 6, 6‐tetramethyl‐1, 2, 4, 5‐tetroxane, Journal of Raman spectroscopy, 30(6), pp. 479-484, 1999. DOI: 10.1002/(SICI)1097-4555(199906)30:6<479::AID-JRS400>3.0.CO;2-L [ Links ]

[10] Coronel, A.C., Agüera, M.B., Torres, A.C., Fernández, L.E. and Varetti, E.L., A vibrational study of 3, 3, 6, 6-tetramethyl-1, 2, 4, 5-tetroxane: The spectra of the deuterated substance and the scaled quantum mechanics force field, Vibrational Spectroscopy, 58, pp. 67-73, 2012. DOI: 10.1016/j.vibspec.2011.10.004. [ Links ]

[11] Keresztury, G., Holly, S., Besenyei, G., Varga, J., Wang, A. and Durig, J.R., Vibrational spectra of monothiocarbamates-II. IR and Raman spectra, vibrational assignment, conformational analysis and ab initio calculations of S-methyl-N, N-dimethylthiocarbamate, Spectrochimica Acta Part A: Molecular Spectroscopy, 49(13-14), pp. 2007-2026, 1993. DOI: 10.1016/S0584-8539(09)91012-1. [ Links ]

[12] Evans, J.C., The vibrational assignments and configuration of aniline, aniline-NHD and aniline-ND2, Spectrochimica Acta, 16(4), pp. 428-442, 1960. DOI: 10.1016/0371-1951(60)80037-9. [ Links ]

How to cite: Espinosa-Fuentes, E., Meza-Fuentes, E., Colpas-Castillo, F., Castro-Suarez, J.R., Chiquillo-Correa, G. and Mora M., Verification of the vibrational theoretical assignment of the DADP using isotopic labelling. DYNA, 85(205), pp. 64-68, June, 2018.

Received: September 20, 2016; Revised: June 15, 2017; Accepted: October 05, 2017

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License