SciELO - Scientific Electronic Library Online

 
vol.86 issue208Almidones de yuca modificados por biocatálisis enzimática: efecto del tiempo de reacción y método de secadoFree fatty acids in rice bran during its storage after a treatment by twin-screw extrusion to prevent possible rapid hydrolytic rancidity of lipids author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Dyna rev.fac.nac.minas vol.86 no.208 Medellín Jan./Mar. 2019

https://doi.org/10.15446/dyna.v86n208.72964 

Artículos

Evaluating gelling-agent mixtures as potential substitutes for bacteriological agar: an approach by mixture design

Evaluación de mezclas de agentes gelificantes como potenciales sustitutos del agar bacteriológico: una aproximación mediante diseño de mezclas

John Sanchez-Cardozoa 

María Ximena Quintanilla-Carvajalb 

Ruth Ruiz-Pardob 

Alejandro Acosta-Gonzálezc 

a Maestría en diseño y gestión de procesos, Universidad de La Sabana, Chía, Colombia. johnsanc@unisabana.edu.co,

b Grupo de investigación de Procesos Agroindustriales, Universidad de La Sabana, Chía, Colombia. maria.quintanilla1@unisabana.edu.co, ruth.ruiz@unisabana.edu.co

c Grupo de investigación de Bioprospección, Universidad de La Sabana, Chía, Colombia. alejandro.acosta1@unisabana.edu.co


Abstract

Gelling agents are components to solidify media cultures facilitating the isolation of microorganisms in pure cultures. Agar is the most used gelling agent in microbiological field because of properties like gelling temperature and a desirable texture (high firmness and low adhesiveness). A current problem with agar manufacture is that overexploitation of the algae Gelidium spp is affecting the species conservation and has increased agar’s market price by up to 300%. The aim of this research was to propose substitutes of bacteriological agar in terms of texture by using some reported gelling agents used by food and agroindustry. To determine the effects of the components on texture, were proposed a mixture-design screening to establish an optimal mixture that replace agar. The optimal result, according to the desirability function, were composed of arabic gum (2%), gelan gum (0.5%) and carrageenan (0.5%). This mixture exceeds the firmness of the reference matrix (agar at 2%) by 15% and is potentially 25% more cheaper and without significative statistical difference in growth CFU when compared to agar based media.

Keywords: gelling agents; mixture design; solid media culture; agar substitute

Resumen

Los agentes gelificantes son componentes que solidifican medios de cultivo para facilitar el aislamiento de microorganismos en cultivos puros. El agar es el agente gelificante más utilizado en el campo microbiológico debido a propiedades como su temperatura de gelificación y una textura deseable (alta firmeza y baja adhesividad). El problema actual de la producción de agar es que la sobreexplotación de las algas Gelidium spp está afectando la conservación de la especie y ha aumentado su precio de mercado hasta en un 300%. El objetivo de esta investigación fue proponer sustitutos del agar bacteriológico en términos de textura mediante el uso de algunos agentes gelificantes utilizados por la industria de alimentos y la agroindustria. Para determinar los efectos de los componentes en la textura, se propuso un diseño de mezcla tipo screening para establecer una mezcla óptima que reemplace el agar. El resultado óptimo, según la función de deseabilidad, se compone de goma arábiga (2%), goma gelan (0,5%) y carragenina (0,5%). Esta mezcla superó la firmeza de la matriz de referencia (agar al 2%) 15% y es potencialmente un 25% más económica. Además, no presentó una diferencia estadísticamente significativa en el conteo de UFC en comparación con los medios basados en agar.

Palabras clave: agentes gelificantes; diseño de mezclas; medios solidos de cultivo; sustituto de agar

1. Introduction

The addition of gelling agents to culture broths, proposed by Robert Koch in 1880, became a point of inflection in the microbiological field because it allowed the culture of pure isolated colonies [1]. Gelling agents offer a solid and stable structure within the media culture, which absorbs nutrients from the broths to diffuse them to the microorganisms, and acts as a physical barrier that supports the growth of individual colonies, allowing their easy isolation [2,3].

The most widely used gelling agent in the microbiological field is agar-agar, which has been widely distributed since 1905 [4]. Agar allows microorganisms to be incubated at temperatures of up to 37° C because of its high gelation temperature [5]; the high transparency facilitates the differentiation of colonies; the high firmness and low adhesiveness favors the distribution of microorganisms on the media’s surface [1]. Because of these characteristics, agar-agar became an input in high demand in the biotechnology industry, which, during 2009, consumed 10% of its global production [4].

One of the largest problems associated with agar has been the overexploitation of its source of origin - the marine red alga Gelidium spp - which is projected to influence the species conservation with irreparable consequences [6]. For this reason, some of the major producing countries of this algae, such as Morocco, Spain, and Portugal, decreased its harvest, while Japan almost completely abandoned its manufacture [6], causing a 20% decrease in global production [6,7]. Currently, there is no evidence that the product’s shortage is temporary, because there are no methodologies for the artificial cultivation of this algae, and there are few countries that produce it [4,6].

Research into the replacement of bacteriological agar has been carried out with several gelling agents. Babbar & Jain (2006) proposed xanthan gum; Rygaard et al. (2017) proposed gellam gum; Taintor (2003) and Datta et al. (2011) proposed t-carrageenan and κ-carrageenan, respectively; and Das et al. (2015) compiled information in their review article demonstrating the possibility of guar gum and locust bean, among others. In these studies, it was possible to find potential gelling agents with the desired characteristics, such as the formation of stable slants, but with undesirable properties, such as low firmness, high adhesiveness, and brittleness. Carrageenan, despite having highly desirable characteristics, is a product derived from marine algae, so large-scale exploitation could provoke a threat equal to that of agar [6].

A possible solution was proposed by Ozgur et al. (2017), who established a mixture design to quantify the synergies between the components to substitute pectin in acid sucrose systems. As a result, they obtained a formulation that maximized the desired characteristics in the mixture and attenuated the undesired ones, finding a potential substitute of the pectin in the studied conditions. Additionally, to avoid the overexploitation of some of the natural resources, it emerges as a novel solution to the shortage of agar, the implementation of matrices from agroindustry. Research has demonstrated the gelling properties of borojó [13] and whey protein [14], which are abundant resources that have not been studied for the formulation of gels with microbiological application.

As a consequence, the aim of this work was to propose a mixture-design screening to establish partial or complete substitutes of bacteriological agar in terms of firmness and adhesiveness (texture), using several matrices with known gelling or thickener capacity.

2. Materials and methods

2.1. Materials

To test solid media in Petri dishes, the following components were used: agar (Fischer scientific, St. Louis, USA), gellam gum (Spectrum, New Brunswick, USA), k-carrageenan (Sigma Aldrich, St. Louis, USA), ghatti gum (Spectrum, New Brunswick, USA), phase-gel borojó extract (Borojoa patinoi) according to Rodríguez-Bernal et al., (2016), whey protein isolate (WPI; Davisco, Eden Prairie, USA), xanthan gum (Sigma Aldrich, St. Louis, USA), guar gum (Cimpa, Bogotá, Colombia), locust bean (Spectrum, New Brunswick, USA) and arabic gum (Fischer Scientific, Massachusetts, USA).

To prepare basal media M9, the components and the concentrations used per liter were as follows: 6g 2 HPO 4 (Merck, Darmstadt, Germany), 3g KH 2 PO 4 (Panreac, Barcelona, Spain), 1g NH 4 Cl (Merck, Darmstadt, Germany), 0.5g NαCl (Merck, Darmstadt, Germany), 3mg CαCl 2 (Bioquigen, Vancouver, Canada), 1g yeast (Fischer scientific, St. Louis, USA) and 1ml of 1M M g S0 4 (Merck, Darmstadt, Germany).

2.2. Mixture design

To determine the effect of the concentration of the components (factors) on the firmness and adhesiveness of gels (response variables), a screening mixture design was carried out using Design Expert 10 software (Stat-Ease, Minneapolis, USA); the limits of the components in the mixture (levels) are 0.5% for agar, gellam gum and carrageenan, and 3% for borojó extract, arabic gum, ghatti gum, guar gum, xanthan gum, locust bean, and WPI. The obtained results were evaluated by analysis of variance (ANOVA), and then adjusted to different polynomial regression models to select the best fit, determined by the highest correlation coefficient (R2) close to 1.0, and a non-significant lack of fit (p>0.05) [15]. Subsequently, an optimization step was carried out by evaluating the software's desirability function, establishing as optimized variables the maximum firmness, and minimal adhesiveness and agar concentration [12]. The optimal mixture with the desirability close to 1.0 was physically recreated and the texture variables measured. Results obtained for the response variables were compared to those obtained for the reference medium (agar 2%).

2.2. Preparation of solid media

Gels were prepared in distilled water at 90 °C by weighing the amounts of the components on an analytical balance and stirring on a heating plate until a homogeneous solution was reached. Subsequently, they were sterilized in an autoclave (Sturdy, New Taipei, Taiwan) at 121° C for 20 min. The sterilized gels were served in 9 cm Petri dishes, covered with parafilm and allowed to gel at room temperature for 1 h to measure firmness and adhesiveness parameters.

2.3. Firmness and adhesiveness measurement

The firmness and adhesiveness of the mixtures was determined with in a single compression test in a TA XT plus texturometer (Stable Micro System, Surrey, UK) with a 5 kg load cell and a 6 mm cylindrical test piece (p / 6); the pre-test and during test speed was 1 mm/s; the displacement was 5 mm and the trigger force of 1 g [16,17]. Firmness was reported as peak force and adhesiveness as the negative area of the force vs. time graph for each mixture [18]; when the firmness of the gel did not exceed the trigger strength (1 g) was reported as <1 g and its adhesiveness as unmeasurable data (UMD).

2.4. Microbial growth

Soil samples of 100g were collected at a depth of 10 cm from soil at La Sabana University (4°51'25.5"N 74°01'59.3"W). The soil was sieved and homogenized using serial dilution method (10-3-10-6) into Petri dishes using a basal media M9 into two different gelling agents for duplicates (1) agar 2% (2) optimal mixture. Then the results on the counting were analyzed by ANOVA test.

3. Results and discussion

3.1. Mixture design results

Texture results obtained for the different mixtures are shown in Table 1. Treatment 18 in Table 1 had the highest firmness according to the experiment but represents just half the firmness of the reference media (Agar at 2%). The most adhesive treatments were those composed of guar gum. In 10 treatments, it was not possible to measure adhesiveness because its firmness was lower than 1 g. Neither firmness nor adhesiveness recorded from tested mixtures reached similar values obtained for the reference.

Although during the experimental design agar, gellam, and carrageenan weren’t tested as sole components in a mixture, it has been reported in the literature that these gelling agents form thermoreversible gels at low concentrations that interact with other agents through hydrogen bonds [4,5,19].

Treatments with a single component (15, 17, 20, 21, 22, 23, and 24 in Table 1) under the experimental conditions tested cannot form gels, this behavior was previously reported for ghatti [20], arabic, xanthan, guar gums, locust bean [21] and WPI. On the other hand, when they were mixed with another component, such as agar, gellam, or carrageenan, a solid steady structure is developed. For these reasons, the possible synergistical or antagonist effects that the mixture causes during experiments for each component, will be discussed in the following paragraphs

3.1.1. Borojó

Borojó extract was the only component that, mixed with agar (Treatment 5), gellam (Treatment 12), and carrageenan (Treatment 19), formed a gel whose firmness was unmeasurable (firmness >1 g). This behavior is probably the result of the sterilization temperature (121 °C) and the borojó extract pH of 3 [22], which could have hydrolyzed the polysaccharides responsible for gelling in agar, gellam gum, and carrageenan [4,5,19]. Although a buffer solution could be used to avoid the acid hydrolysis of the polysaccharides, the gelling of the low methoxyl pectin of borojó occurs at pH lower than 3 [23]. For these reasons, it could be said that there is an incompatibility in the gelling conditions of agar, carrageenan, and gellam gum, and in future research, this component will be discarded. No previous reports in the literature of borojó mixtures with these gelling agents were found.

3.1.2. Xanthan gum

Treatment 1 (Table 1) demonstrates that xanthan gum’s firmness in a mixture with agar and gellam gum is less than 10 g, which is less than 10% of the control, but its adhesiveness is one of the highest in the study.

Table 1 Texture results for mixture design experiment. 

(AG) agar, (GE) gellam gum, (CA) carrageenan, (GH) ghatti gum, (BO) borojó extract, (WPI) whey protein isolate, (XA) xanthan gum, (GU) guar gum, (LB) locust bean, (AR) arabic gum, (Firm.) firmness, y (Adhesi.) adhesiveness, (UMD) unmeasurable data.

Source: author's elaboration.

The literature reports that xanthan gum form weak gels with low firmness and high adhesiveness, both of which increase with its concentration [24]. In this study, was found that whole mixtures with xantham gum were undesirable for their high adhesivenesses and low firmnesses. A possible explanation for this behavior could be its chemical structure which consists of a helicoidal stiff bonding [25]. This structure forms highly ordered networks with weak intermolecular forces that can hinder the creation of new hydrogen bonding with agar and gelan [25,26].

Raina et al. (2011) reported that xanthan mixtures, agar in proportions 0.7%:0.3% and 0.6%:0.4%, formed structures with a firmness between 42 g and 60 g, with an adhesiveness between 32 and 40 g∙s.

In both studies, texture and adhesiveness in the mixtures were lower and higher, respectively, than agar. The main reasons for data differences are because Raina et al. (1) uses basal media rich in salts (MS and B5) instead of distilled water that favors the distribution of the gelling molecules of the xanthan gum [25] and (2) the probe size used was larger than the one used in this study for the texture affecting the result of the texture measurement [27].

3.1.3. Whey protein isolate

During the test with whey protein isolate (WPI), it was observed in Treatments 3 and 14 (Table 1) that the mixture before sterilization forms a yellow homogeneous gel (data not shown), but after sterilization the gel was separated into two phases (polysaccharide-protein or polysaccharide-water), impeding the formation of a stable three-dimensional network. This behavior is because the temperatures reached during sterilization of the treatment exceed denaturation temperature of α-lacto albumin and β-lacto globulin of approximately 80 °C [28], forming a cloudy solution or a clot-like gel [29]. Whey protein has already been used for mixes with gellam gum, which could confirm that problems came not from the mixture but from the process conditions [30].

3.1.4. Guar gum and locust bean

Treatments 2, 11, and 21 (Table 1) with guar gum and 16 with locust bean (Table 1) presented a high viscosity, which hindered their homogenization and dosage in Petri dishes as reported by Das et al. (2015). In Table 1, it was also observed that Treatments 21, 11, and 2 resulted in the highest adhesiveness with values of 5.3, 3.5, and 1.4 g s, respectively.

Treatment 2 also presented the second highest firmness of the experiment (62.9 g), which was 44% of the firmness of control, but its adhesiveness was more than three times higher. Raina et al. (2011) also reported high firmness results (107-261 g) associated with synergies between agar and the galactomannans of guar gum and locust bean, while the high adhesiveness is attributed to interactions between galactomannans molecules. The synergistic mechanisms was explained by Grisel et al. (2015), in their study in which they propose that interactions between these gelling agents increases with the number of unsubstituted hydroxyl molecules of the galactomannans, which are proportional to the galactose/mannose (G/M) ratio. For locust bean, a G/M ratio of 3 implies that it has a greater number of non-substituted hydroxyl groups than guar gum with a G/M ratio of 1.3 [32]. This arrangement of the molecules probably causes, in Treatment 16, the highest firmness in dual component mixtures resulting from hydrogen bonding between locust bean and carrageenan. Higher viscosities in treatments with guar gum are related with the interaction of manose-manose molecules [31]. For future studies, it is recommended to focus on locust bean hydrogen bonding and discarding guar gum for its high adhesiveness.

3.1.5. Ghatti and arabic gums

Treatment composed of ghatti gum and carrageenan (18 in Table 1), shows a firmness of 70.1 g, which represents the highest firmness during experiment, with 50% of control (Table 1). This behavior probably was caused by the formation of hydrogen bonds between the molecules of galactomannans, arabinogalactans, and molecules of agar, carrageenan, or gellam gum [33]. Even when, during experimental design mixtures with arabic gum and agar, gellam and carrageenan were not tested, the same behavior is expected as in ghatti gum, because both have arabinogalactans and galactomannans structure [34]. The application of these two gums is one of the most attractive mixture found in the experiment, because, despite not gelling in concentrations of 3%, they can interact and promote the firmness of the gels to form stable surfaces, without increasing adhesiveness as guar gum does.

3.1.6. Mixture of ten components

Treatments 6-10 represent a mixture of ten components (Table 1). It is observed that these treatments are the only ones with borojó, which forms a gel and allow sterilization of WPI without splitting into two or more phases. This behavior was attributed to smaller proportions of each component decreasing its negative effects on the texture of the whole mixture.

3.2. Modeling and optimization

3.2.1 Modeling fitment

The polynomials with the highest adjustment, which describe the behavior of the response variables according to the composition of the mixture and its ANOVA, are presented in Table 2, Eq. 1 (firmness) and Eq. 2 (adhesiveness):

The ANOVA results of the mixture design are shown in Table 2. The linear model has a significant effect for both response variables and that the adjusted models should describe the behavior of the texture of the gels by their coefficient of determination (Table 2). In Eq. 2, itwas observed that carrageenan is the component that contributes the most to mixture firmness, while borojó and xanthan gum are the ones that most decrease it, and Eq. 2 shows that, as was expected from the literature guar gum is the component that most increases the adhesiveness [32]

Table 2 ANOVA for the adjusted variables to mixture design: firmness and adhesiveness 

Source: author's elaboration

Table 3 Comparison of texture for optimal mixture and reference media (Agar 2%) 

Source: author's elaboration

3.2.2. Optimization by desirability function

Fig. 1 presents the desirability graph for the optimal result of the mixture design. It is observed that, under optimization conditions (maximum firmness, and minimum adhesiveness and concentration of agar), the mixture with a desirability of 0,976 was composed of 0.5% gellam gum, 0.5% carrageenan, and 2% arabic gum.

Source: author's elaboration

Figure 1 Desirability graph for optimal mixtures restricted to the maximization of firmness and the minimization adhesiveness and the concentration of the agar. 

The optimal mixture presents a firmness 15% higher than agar (Table 3) so the desirability function proposes a mixture capable of substitute agar in firmness.

On other hand, an economical valuation of the mixture demonstrates that this optimal mixture could reduce 25% of cost compared to the reference media (agar 2%), this comparison was based on the cost of the materials used in this study.

3.3. Microbial evaluation

The counts of microbial cells on serial dilutions are shown in Table 4. ANOVA analysis result into not significative differences between both gelling agents (p>0.05). This behavior means that optimal mixture does not affect the viable count of microorganisms, according to the theory that gelling agents are inert into culture media [3].

Table 4 Serial dilution cell counts in soil 

Results in the Table 4 are presented by mean of microbial counts (desv.est).

Source: author's elaboration

Further analysis should be carried out to stablish what are the effects of the gelling agents on the microorganisms such as diameter growth, ecological diversity etc.

4. Conclusions

The mixture design proposed in this research allowed the discovery of a substitute formulation to completely replace the bacteriological agar in terms of texture, an elementary property of traditional solid media used for culturing micro-organisms. The mixture, composed of carrageenan, gellam gum, and arabic gum, is 25% cheaper than agar 2% and exceeds its firmness, probably due to synergistic effect associated to hydrogen bonding. Matrices such as borojó and WPI, under the conditions studied, were not viable in terms of texture for later use in the replacement of microbiological agar. This result was achieved by using a screening mixture design, with several components but with a few treatments, which allowed the easy discarding of some matrices and the focusing on those with desirable properties. In conclusion, this research establishes a methodology for future studies to find a solution to the problem of agar scarcity and a new mixture capable of substitute agar in terms of firmness and the growth of the soil sample tested.

Acknowledgment

The authors thank the Universidad de La Sabana for the financing of the internal project ING-173- 2016 and the research groups of Bioprospección and Procesos Agroindustriales. The engineer John Sanchez also thanks to the master's program in in Process Design & Management for his graduate assistance program.

References

[1] Das, N., Tripathi, N., Basu, S., Bose, C. and Maitra, S., Progress in the development of gelling agents for improved culturability of microorganisms, 6(July), pp. 1-7, 2015. DOI: 10.3389/fmicb.2015.00698 [ Links ]

[2] Sandle, T., Pharmaceutical microbiology: essentials for quality assurance and quality control, 80th ed. Cambridge: Woodhead Publishing Series in Biomedicine, 2016. [ Links ]

[3] Petrovski, S. and Tillett, D., Back to the kitchen: food-grade agar is a low-cost alternative to bacteriological agar, Anal. Biochem., 429(2), pp. 140-141, 2012. [ Links ]

[4] Armisén, R. and Gaiatas, F., Agar, in Handbook of Hydrocolloids, Elsevier, 2009, pp. 82-107. [ Links ]

[5] Rhein-Knudsen, N., Ale, M.T., Ajalloueian, F., Yu, L. and Meyer, A.S., Rheological properties of agar and carrageenan from Ghanaian red seaweeds, Food Hydrocoll., 63, pp. 50-58, 2017. [ Links ]

[6] Porse, H. and Rudolph, B., The seaweed hydrocolloid industry: 2016 updates, requirements, and outlook, J. Appl. Phycol., 29(5), pp. 2187-2200, 2017. DOI: 10.1007/s10811-017-1144-0 [ Links ]

[7] Callaway, E., Lab staple agar hit by seaweed shortage, Nature, 528(7581), pp. 171-172, Dec. 2015. DOI: 10.1038/528171a [ Links ]

[8] Babbar, S.B. and Jain, R., Xanthan Gum: an economical partial substitute for agar in microbial culture media, 52, pp. 287-292, 2006. DOI: 10.1007/s00284-005-0225-5 [ Links ]

[9] Mac-Rygaard, A., Thøgersen, M.S., Nielsen, K.F., Gram, L. and Bentzon-Tilia, M., Effects of gelling agent and extracellular signaling molecules on the culturability of marine bacteria, Appl. Environ. Microbiol., 83(9), pp. e00243-17, 2017. DOI: 10.1128/AEM.00243-17 [ Links ]

[10] Taintor, R., Microbial culture medium containing agar and iota carrageenan, 16-Jun-2003. [ Links ]

[11] Datta, S., Mody, K., Gopalsamy, G. and B. Jha, Novel application of κ-carrageenan: as a gelling agent in microbiological media to study biodiversity of extreme alkaliphiles, Carbohydr. Polym., 85(2), pp. 465-468, 2011. DOI: 10.1016/j.carbpol.2011.02.036 [ Links ]

[12] Ozgur, A., Dogan, M. and Karaman, S., Rheological interactions of the xanthan gum and carboxymethyl cellulose as alternative to pectin in organic acid-sucrose model system: simplex lattice mixture design approach, Eur. Food Res. Technol., 243(6), pp. 1041-1056, 2017. DOI: 10.1007/s00217-016-2809-7 [ Links ]

[13] Rodríguez-Bernal J.M. et al., Effect of borojo (Borojoa patinoi Cuatrecasas) three-phase composition and gum arabic on the glass transition temperature, J. Sci. Food Agric., 96(3), pp. 1027-1036, 2016. DOI: 10.1002/jsfa.7190 [ Links ]

[14] Ozel, B., Cikrikci, S., Aydin, O. and Oztop, M.H., Polysaccharide blended whey protein isolate-(WPI) hydrogels: a physicochemical and controlled release study, Food Hydrocoll., 71, pp. 35-46, 2017. DOI: 10.1016/j.foodhyd.2017.04.031 [ Links ]

[15] Apeji, Y.E., Oyi, A.R., Isah, A.B., Allagh, T.S., Modi, S.R. and Bansal, A.K., Development and optimization of a starch-based co-processed excipient for direct compression using mixture design, AAPS PharmSci Tech, pp. 14-17, 2017. DOI: 10.1208/s12249-017-0887-x [ Links ]

[16] Raina, R.J., Babbar, S.B., Jain-Raina, R. and Babbar, S.B., Evaluation of blends of alternative gelling agents with agar and development of xanthagar, a gelling mix, suitable for plant tissue culture media, Asian J. Biotechnol., 3(2), pp. 153-164, 2011. DOI: 10.3923/ajbkr.2011.153.164 [ Links ]

[17] Thirawong, N., Nunthanid, J., Puttipipatkhachorn, S. and Sriamornsak, P., Mucoadhesive properties of various pectins on gastrointestinal mucosa: an in vitro evaluation using texture analyzer, Eur. J. Pharm. Biopharm., 67(1), pp. 132-140, 2007. DOI: 10.1016/j.ejpb.2007.01.010 [ Links ]

[18] Hurler, J., Engesland, A., Poorahmary-Kermany, B. and Škalko-Basnet, N., Improved texture analysis for hydrogel characterization: gel cohesiveness, adhesiveness, and hardness, J. Appl. Polym. Sci., 125(1), pp. 180-188, 2012. DOI: 10.1002/app.35414 [ Links ]

[19] Zia K.M. et al., Recent trends on gellan gum blends with natural and synthetic polymers: a review, Int. J. Biol. Macromol., 109, pp. 1068-1087, 2017. DOI: 10.1016/j.ijbiomac.2017.11.099 [ Links ]

[20] Downing, D.L., A complete course in canning and related processes, Vol. 2: Microbiology, Packaging, HACCP and Ingredients, 1996. [ Links ]

[21] Mikuš, Ľ., Valík, Ľ. and Dodok, L., Usage of hydrocolloids in cereal technology, Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 59(5), pp. 325-334, 2011. DOI: 10.11118/actaun201159050325 [ Links ]

[22] López, C.C., Mazzarrino, G., Rodríguez, A., Fernández-López, J.J., Pérez-Álvarez, A. and Viuda-Martos, M., Assessment of antioxidant and antibacterial potential of borojo fruit (Borojoa patinoi Cuatrecasas) from the rainforests of South America, Ind. Crops Prod., 63, pp. 79-86, 2015. DOI: 10.1016/j.indcrop.2014.10.047 [ Links ]

[23] Yin, S., Sim, W., James, D. and Jun, X., Pectin as a rheology modifier: origin, structure, commercial production and rheology, Carbohydr. Polym., 161, pp. 118-139, 2017. DOI: 10.1016/j.carbpol.2016.12.033 [ Links ]

[24] Nishinari, K., Kohyama, K., Kumagai, H., Funami, T. and Bourne, M.C., Parameters of texture profile analysis, Food Sci. Technol. Res., 19(3), pp. 519-521, 2013. DOI: 10.3136/fstr.19.519 [ Links ]

[25] Sworn, G. and Sas, D.F., Xanthan gum, in Handbook of Hydrocolloids, Elsevier, 2009, pp. 186-203. DOI: 10.1533/9781845695873.186 [ Links ]

[26] Morris, E.R., Molecular origin of Xanthan solution properties, 1977, pp. 81-89. DOI: 10.1021/bk-1977-0045.ch006 [ Links ]

[27] Grillet, A.M., Wyatt, N.B. and Gloe, L.M., Polymer gel rheology and adhesion, in Rheology, InTech, 2012. DOI: 10.5772/36975 [ Links ]

[28] Li, K. and Zhong, Q., Aggregation and gelation properties of preheated whey protein and pectin mixtures at pH 1.0-4.0, Food Hydrocoll., 60, pp. 11-20, 2016. DOI: 10.1016/j.foodhyd.2016.03.009 [ Links ]

[29] Totosaus, A., Montejano, J.G., Salazar, J.A. and Guerrero, I., A review of physical and chemical protein-gel induction, Int. J. Food Sci. Technol., 37, 6, pp. 589-601, 2002. DOI: 10.1046/j.1365-2621.2002.00623.x [ Links ]

[30] Cai, B. and Ikeda, S., Effects of the conjugation of whey proteins with gellan polysaccharides on surfactant-induced competitive displacement from the air-water interface, J. Dairy Sci., 99(8), pp. 6026-6035, 2016. DOI: 10.3168/jds.2015-10765 [ Links ]

[31] Grisel, M., Aguni, Y., Renou, F. and Malhiac, C., Impact of fine structure of galactomannans on their interactions with xanthan: two co-existing mechanisms to explain the synergy, Food Hydrocoll., 51, pp. 449-458, 2015. DOI: 10.1016/j.foodhyd.2015.05.041 [ Links ]

[32] Wielinga, W.C., Galactomannans, Handb. Hydrocoll., pp. 228-251, 2009. DOI: 10.1533/9781845695873.228 [ Links ]

[33] Kang, J., Guo, Q., Phillips, G.O. and Cui, S.W., Understanding the structure-emulsification relationship of gum ghatti - A review of recent advances, Food Hydrocoll., 42, pp. 187-195, 2014. DOI: 10.1016/j.foodhyd.2014.04.010 [ Links ]

[34] Klein, M., Aserin, A., Ben-Ishai, P. and Garti, N., Interactions between whey protein isolate and gum Arabic, Colloids Surfaces B Biointerfaces, 79(2), pp. 377-383, 2010. DOI: 10.1016/j.colsurfb.2010.04.021 [ Links ]

How to cite: Sánchez-Cardozo, J., Quintanilla-Carvajal, M.X., Ruiz-Pardo, R., and Acosta-González, A., Evaluating gelling-agent mixtures as potential substitutes for bacteriological agar: an approach by mixture design.. DYNA, 86(208), pp. 171-176, January - March, 2019

J. Sánchez-Cardozo, received the BSc. Eng in Chemical Engineering in 2015 from Universidad de La Sabana, Colombia. Currently is studying the MSc. Process Design & Management of Universidad de La Sabana. His research interests include: gelling agents, and microbial ecology. ORCID: 0000-0002-5353-5610

R. Ruiz-Pardo, received the BSc. Eng in Chemical Engineering in 1996, the MSc. degree in Industrial Engineering in 2000 from Universidad de los Andes, Colombia, and the PhD degree in Chemical Enginering in 2009 from Universidad Nacional de Colombia. Currently, she is a full professor in the Engineering Faculty, Universidad de La Sabana, Colombia. Her research interests include: biotechnology, downstream technologies, freeze concentration, and Bioprocess. ORCID: 0000-0002-3634-5233

M.X Quintanilla-Carvajal, received the BSc. Eng in Agroindustrial Engineering in 2007 by the University of La Sabana in Colombia, and the PhD in Food Sciences by the National Polytechnique Institute of Mexico. Her Research lines include different kind of micro and encapsulation techniques such as, spray drying, electrospinning and emulsification (ultrasound and microfludization) using image analysis, microscopy (optical, ESEM and SEM) as characterization techniques. On 2016 she worked as a visitant professor at the University of Massachuttes studying the bioaccesability fate of nasoemulsions in vitro digestion systems. She works as associate professor at the University of La Sabana since 2012. ORCID: 0000-0001-8219-7246

A. Acosta-González, received the BSc. Microbiology in 1996 and the PhD degree in Biochemistry and Molecular Biology in 2013 from Granada University (Spain). Currently, he is a full professor in the Engineering Faculty at La Sabana University (Colombia). His research interests include: cultivation of microorganisms, metagenomics and microbial ecology of extreme environments. ORCID: 0000-0002-4573-6113

Received: June 18, 2018; Revised: November 16, 2018; Accepted: December 13, 2018

© The author; licensee Universidad Nacional de Colombia.

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License