SciELO - Scientific Electronic Library Online

 
vol.35 issue3Contribution of local peasant innovations to the re-configuration of endogenous rural development author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Agronomía Colombiana

Print version ISSN 0120-9965

Agron. colomb. vol.35 no.3 Bogotá Sep./Dec. 2017

https://doi.org/10.15446/agron.colomb.v35n3.65221 

Agroclimatología y cambio climático

Evaluation of four degree-day estimation methods in eight Colombian coffee-growing areas

Evaluación de cuatro métodos para estimar grados-día en ocho zonas cafeteras colombianas

Carlos Andrés Unigarro1  * 

Leidy Natalia Bermúdez2 

Rubén Darío Medina3 

Álvaro Jaramillo3 

Claudia Patricia Flórez3 

1 National Coffee Research Center-Cenicafé, Manizalez (Colombia).

2 Faculty of Agricultural Sciences, Universidad Nacional de Colombia, Medellin (Colombia).

3 National Coffee Research Center-Cenicafé, Manizalez (Colombia).


ABSTRACT

Methods to estimate the accumulation of degree-days based on maximum and minimum temperaturesare are commonly used to determine relationships or to adjust phenological models based on the "physiological time". Degree-days are obtained indirectly by these methods, this information is not generally available on hourly or shorter time scales due to the type of equipment used to record data or a data loss in historical time series. To compare the performance of such methods, degree-days were estimated with four indirect methods in eight Colombian locations during 1 year. Each indirect method was evaluated in comparison to the numerical integration method by the trapezoidal rule (reference method) using temperatures recorded every 5 min. Based on the percent bias error, the methods proposed by Arnold, Ometto and Snyder tend to overestimate thermal time, whereas the Villa-Nova method underestimates this time, but with a lower performance as regards to the previous ones.

Key words: thermal time; temperature; numerical integration; linear regression; bias

RESUMEN

Los métodos que estiman la acumulación de los grados-día basados en datos de temperatura máxima y mínima diaria son comúnmente usados para determinar relaciones o hacer ajustes en modelos fenológicos basados en "tiempo fisiológico". La obtención de los grados-día con estos métodos se hace de manera indirecta, dado a que en general no se dispone de información de temperaturas a escala horaria e incuso menor, debido al tipo de equipo utilizado para tomar registros o por la pérdida de datos en series históricas. Con el objetivo de determinar el desempeño de estos métodos, se estimaron los grados-día con cuatro métodos indirectos en ocho localidades colombianas durante 1 año. Cada uno de los métodos se evaluó con respecto al método de integración numérica por regla del trapecio (método de referencia) usando las temperaturas registradas cada 5 min. El desempeño de los métodos se evaluó a partir de un modelo de regresión lineal y sus respectivos errores. Los métodos de Arnold, Ometto y Snyder, según el porcentaje de sesgo, tienden a sobrestimar el tiempo térmico, mientras el método de Villa-Nova lo subestima, pero con un menor desempeño respecto a los anteriores.

Palabras clave: tiempo térmico; temperatura; integración numérica; regresión lineal; sesgo

Introduction

Temperature affects several physiological processes in plants. Generally, this influence is due to a thermal action on enzymatic activity, with temperature inducing changes in the conformation of enzymes and consequently on their functionality (Sharpe and DeMichele, 1977; Johnson and Thornley, 1985; Higley et al., 1986; Bonhomme, 2000). The phenological response of plants to temperature is observed as changes in developmental rates (the occurrence of certain phenological events per time unit) (Raworth, 1994). Jaramillo and Guzmán (1984) found that a significant correlation exists among the number of days elapsed from planting to first harvest, the average air temperature (°C) and the thermal units.

Heat accumulation is referred to as "heat units", "thermal time", "cumulative growing degree days" or "physiological time" and reflects the concept of a quantifiable relationship between temperature and the rate of crop development (Gordon and Bootsma, 1993; McMaster and Wilhelm, 1997; Bonhomme, 2000; Snyder et al., 2013). This relationship has been successfully used in agricultural science to predict and quantify the time between the plant phenological stages (Gilmore and Rogers, 1958; Cross and Zuber, 1972; McMaster, 1993; Cardina et al, 2007).

In the study of phenology and crop development, the concept "physiological time" can be expressed in quantifiable terms, with this time measured in growing degree-days (GDD, °C-days) (McMaster and Wilhelm, 1997; Rodríguez et al., 2012) and representing the thermal units recorded between the minimum (Tb) and maximum (TB) threshold temperatures at the hours of a day (Snyder et al., 2013). Mathematically, the daily GDD are obtained by the integration of growing degree-hours (GDH, °C-hours) for each hour of the day divided by the number of hours in a day (24 h) (Roltsch et al., 1999; Cesaraccio et al., 2001; Souza et al., 2011; Rodríguez et al., 2012; Snyder et al, 2013).

However, hourly data are not always available, for example, when historical records are used or automatic weather stations are scarce. In such cases, the GDD are estimated using mathematical methods that use only daily maximum (TM) and minimum (Tm) temperatures (Snyder et al., 1999). Among the methods most frequently used for calculating degree-days are the rectangle (Arnold, 1959), triangle (Lindsey and Newman, 1956) and sine wave (Baskerville and Emin, 1969) methods, including their variants (Villa-Nova et al., 1972; Ometto, 1981; Snyder, 1985).

According to Roltsch (1999), when the TM exceeds the TB, these methods can use two approximations of accumulated thermal units: (1) the vertical cutoff, which assumes that there has been no accumulation of thermal units and (2) the horizontal cutoff, which assumes that the thermal units continue to accumulate until the Tb is reached. The threshold temperatures are the values under which (Tb) or above which (TB) the development rate is zero.

However, the threshold temperature is only a statistical value, which may be distant from the "physiological temperature" for which the development rate is close to zero, essentially because its value may vary depending on the method used for its calculation, on the growth stage or on the physiological process analyzed (Wang, 1960; Durand et al., 1982; Bonhomme, 2000; Litschmann et al., 2008).

In crops such as Brussels sprouts, cabbage, parsley, legumes, fodder, corn, soybeans and tomatoes, the Tb may oscillate between 0 and 10°C (Gordon and Bootsma, 1993). For Coffea arabica L. in Brazil, Lima and Silva (2008) estimated the Tb and TB at 12.9 and 32.4°C, respectively, from transplanting to the first flowering event, whereas Pezzopane et al. (2008) obtained a Tb value of 10.2°C from flowering to harvesting based on several harvest cycles using the "Mundo Novo" variety. For most tropical plants, including coffee, the Tb and TB values have been defined, respectively, as 10°C (Pedro-Junior et al., 1977; Jaramillo and Guzmán, 1984) and 32°C (Jaramillo and Guzmán, 1984; Hatfield and Prueger, 2015).

Roltsch et al. (1999), Souza et al. (2011), Rodríguez et al. (2012) and Kean (2013) have found variation in performance when comparing different methods to estimate GDD based on maximum and minimum daily temperatures and when applying those methods to different growing regions. These disparities become relevant, for example, should the estimated accumulation of degree-days be greater than the "real" accumulation; this example would imply that a shorter chronological time than estimated would be necessary to reach a certain phenological stage, or vice versa (Bryant et al., 1998), which can affect the predictions of phenological models based on "physiological time" (Kean, 2013).

Given the importance of the degree-day calculation in phenological models, the objective of the present research was to evaluate the performance of four horizontal cutoff methods in estimating degree-days within eight Colombian coffee-producing areas, using thermal thresholds associated with tropical plants.

Materials and methods

Study area and meteorological data

Eight localities with contrasting environmental conditions were selected, espatial distribution and economic importance for Colombian coffee crop was considered. Each locality was equipped with an automatic, RAWS-F, Fire Weather, Campbell Scientific® Remote Automated Weather Station from the Coffee Meteorological Network, a part of the Colombian National Federation of Coffee Producers (Federación Nacional de Cafeteros de Colombia) (Tab. 1, Fig. 2). The air temperature was recorded 24 h a day between February 1, 2014, and January 31, 2015, with five-minute intervals between measurements. The differences in the number of daily logs for the meteorological stations, due to the days with missing data are shown in Table 1. The temperature sensors were previously calibrated, by means of the homologation in parallel between conventional and authomatic stations, with amaximum error of ± 0.5 °C.

TABLE 1 Geographic location of the weather stations used in the study; average annual historical values for precipitation (P), maximum temperature (T MAX), temperature (T MED), minimum temperature (T MIN) and mean relative humidity (RH); and the number of days used in calculating the degree-days for each locality (ND). 

FIGURE 1 Location in Colombia of the weather stations of the Coffee Meteorological Network used in the study. 

FIGURE 2 Description ofthermal units (TU) integrated in the AUC for GDD TT (a), GDD Tb (b) and GDD TB (c)  

TABLE 2 Indirect methods of degree-day estimation used in the analysis. 

Where: TM = maximum daily temperature (ºC), Tm = minimum daily temperature (ºC), Tb = minimum threshold temperature (ºC), TB = maximum threshold temperature (ºC), GDD = growing degree-days according to the indirect method (°C-days), GDD1 = degree-days above Tb (°C-days), and GDD2 = degree-days above TB (°C-days).

Degree-day calculation

For all the developed methods, the Tb and TB values were considered as 10 and 32°C, respectively, following the proposal by Pedro-Junior et al. (1977), Jaramillo and Guzmán, (1984), Camargo and Pereira (1994) and Hatfield and Prueger, (2015) for coffee cultivation.

Numerical integration by trapezoidal rule (reference method)

The integration method was used as the reference method against which the indirect methods were evaluated due to its greater estimation precision and its comparatively frequent data collection at relatively short intervals (Cesaraccio et al., 2001; Souza et al., 2011; Rodríguez et al., 2012).

The estimate of GDD using the reference method (GDDr) was calculated as follows:

Where GDDr = degree-days of the reference method (°C-days), GDDTT = total degree-days (°C-days), GDDTB = degree-days above TB (°C-days), and GDDTb = degree-days below Tb (°C-days).

To obtain the values that compose expression (1), we used expression (2), in which the areas of individual trapezoids constructed from the temperature records were calculated to apply the "trapezoid rule". These areas were integrated into an area under the curve (AUC), which was divided by the total number of seconds per day (86400), thus obtaining the daily thermal units, representing the total degree-days per day (GDDTT) in this case. To calculate the GDDTB and GDDTb, the AUC was integrated, assuming that the temperatures (the mi values in expression 2) were, respectively, higher than or equal to the TB and below or equal to the Tb at corresponding times (Fig. 2).

Where TU = thermal units, m¡ = temperature in the ith measurement, and t¡ = ith time in the daily logs.

Indirect methods evaluated

The daily "cumulative growing degree days" or "physiological time" in GDD was estimated using the daily maximum and minimum temperature and four indirect methodologies formerly described in the literature (Arnold, 1959; Villa-Nova et al, 1972; Ometto, 1981; Snyder, 1985) (Tab. 2), some of them previously applied to coffee production (Lima and Silva, 2008).

Where: TM = maximum daily temperature (°C), Tm = minimum daily temperature (°C), Tb = minimum threshold temperature (°C), TB = maximum threshold temperature (°C), GDD = growing degree-days according to the indirect method (°C-days), GDD1 = degree-days above Tb (°C-days), and GDD2 = degree-days aboveTB (° C-days).

Statistical analysis

A linear regression model of the observed values was adjusted to each loca lity and indirect method, fitting the reference method data (dependent variable, Y) as a function of the data obtained with the indirect method (independent variable, X). The significance of the regression coefficients was evaluated using a t-test with α=5%. To identifying the best adjustment, we also evaluated whether the regression slope coefficient (β1) differed statistically from one to determine whether the indirect method overestimated or underestimated the GDD. Additionally, the coefficient of determination (R2) was calculated.

The bias of the degree-days accumulated by each conventional method was es timated as the percent bias (PB) of the residual (expressed as percentage), as shown by expression (24).

Where: GDDr = degree-days of the reference method (°C-days); GDD = growing degree-days according to the indirect method (°C-days).

The statistical analyse s were performed using SAS software version 9.4 (SAS Institute, 2012).

Results and discussion

The results of adjusting the regression model with the data from the reference method expressed as a function of the data obtained from each of the indirect methods are presented in Table 3 for each weather station. The regression coefficients (β1) were significantly different from zero for all the methods by the t-test at the 5% probability level, indicating that the values obtained with each of the indirect methods help explain the results observed with the reference method. The proportion of the data variability observed with the reference method that was explained by the indirect method varied from 32 to 82%, according to the coefficients of determination (Tab. 3).

Table 3 Regression coefficient (β1), standard error (STE), coefficient of determination (R2) and percent bias (PB) obtained in the relation between accumulated degree-days in each indirect method and the accumulated degree-days estimated by numeric integration during the evaluated period in eight coffee-growing areas of Colombia. 

SE = standard error; a = t-test with alpha 5% for β1 values significantly different from zero; b = t-test with alpha 5% for β1 values significantly different from one.

The regression co efficient was equal to one (it means, a 1:1 ratio existed between the indirect method and the reference method) for the i ndirect method of Villa-Nova et al. (1972) and for the localities of Naranjal (β1 = 0.960°C-days) and El Rosario (β1 = 1.053°C-days) (t-test, α = 5%). The coefficient was significantly different from 1 for all the other localities.

Regarding goodness-of-fit, R2 for the methods proposed by Arnold (1959), Ometto (1981) and Snyder (1985) exceeded 0.73 for the El Rosario, El Sauce, Jorge Villamíl, Naranjal and Paraguaicito localities and varied between 0.59 and 0.68 for Julio Fernández and Pueblo Bello. For every locality assessed, the R2 obtained for the method of Villa-Nova et al. (1972) was lower compared to all the other methods. The lowest adjustment values for R2 were recorded for a locality in Bertha (between 0.32 and 0.44).

The PB showed that when the degree-day errors accumulated, for the methods of Arnold (1959), Ometto (1981) and Snyder (1985) overestimated the GDD relative to the reference method by between 8.3 and 17.2% at all eight localities. Under the thermal thresholds evaluated, these three methods were also consistently observed to show no significant differences. The method described by Villa-Nova et al. (1972), with negative PB values, was the only one to underestimate the reference method results, ranging between 2.0 and 20.6%.

In the present study, the methods of Arnold (1959), Ometto (1981) and Snyder (1985) showed no descriptive differences by locality regarding the regression coefficient, R 2 or PB values (Tab. 3). Souza et al. (2011) also reported that these three methods produce similar results, which is due to the similar geometric forms usedby these methods for estimating the degree-days based on Tb and TB.

According to the above, these methods did not present differences, because most of the minimum temperatures were higher than the Tb in the daily records. However, in a very few cases, the maximum temperatures exceeded the TB. This occurrence causes the methods of Ometto (1981) and Snyder (1985) to consider expressions based only on the Tb, a situation bearing similarity to the arising results with the method of Arnold (1959), which only includes Tb in its mathematical expression. According to Higley et al. (1986), even though omitting a maximum development threshold could decrease the precision of the degree-day estimation, the introduced error is low as long as the daily maximum temperatures are generally lower than the maximum threshold temperature for development (TB).

The evaluation criteria did indicate different performance among the localities for themethods of Arnold (1959), Ometto (1981) and Snyder (1985). For example, higher coefficients of determination (R 2 ) were observed for the localities of El Rosario, El Sauce, Jorge Villamíl, Naranjal and Paraguaicito compared to those on Bertha, Julio Fernández and Pueblo Bello (Tab. 3), this implies a better fit for the first. Carlson and Hancock (1991) and Roltsch et al. (1999) highlight the importance of R2 as an evaluation criterion to determine the degree of fit between methods.

The PB also varied among the localities, although the variation was inconsistent with that described for the adjustment. Comparatively high PB values were obtained for Bertha and El Sauce, where as those for El Rosario, Jorge Villamíland Pueblo Bello were low (Tab. 3). The greater PB for Bertha could be attributed to the lower temperatures recorded in this area (Tab. 1). By contrast, the greater PB for El Sauce could be mostly due to variation in cloudiness and wind speed, which affect the daily temperature fluctuation. Roltsch et al. (1999) and Worner (1988) found that when degree-days are estimated by indirect methods, a greater error is found for cold areas or climates in which fast thermal changes occur. Both error and bias are important parameters to consider because the prediction of phenological events is linked to the accumulation of physiological time (Rodríguez et al., 2012).

The accumulated error evaluated by the PB did not exceed 17.1°% compared to Arnold (1959), Ometto (1981) or Snyder (1985) methods in any locality (Tab. 3). This error could be considered acceptable for the prediction as regards to the PB found by Rodríguez et al. (2012) for Colombia (between 7.13 and 30.57%). The different errors involved may cancel each other to some extent, but the greatest source of error, which is thermal accumulation, results from inaccurate temperature estimation (Pruess, 1983). Those methods with positive PB values overestimated the degree-days relative to the ones calculated by the reference method, which was also reported by Souza et al. (2011).

An overestimation can be convenient, considering that an underestimation of accumulated degree-days can lead to erroneous conclusions regarding a phenological event in poikilothermic organisms by inaccurately predicting a later event than actually occurs (Bryant et al., 1998). Plant development may be further affected by not only nutritional status and water stress but also photoperiod in long-day plants and, to a lesser extent, in short-day plants (Bonhomme, 2000). Therefore, any deleterious effects of these factors should be reduced for cash crops, with all required substrates present in amounts adequate to ensure growth (Higley et al, 1986).

The method proposed by Villa-Nova et al. (1972) was the only one to present regression coefficients statistically equal to 1 and to underestimate the reference method, contrasting with the results reported by Souza et al. (2011).

Conclusion

Considering the PB, the methods proposed by Arnold, Ometto and Snyder tend to overestimate thermal time, whereas the method proposed by Villa-Nova underestimates thermal time, but with a lower performance regarding to the previous ones. However, the performance of each method can vary between zones due to the agri-environmental conditions typical of each locality. Arnold's method can be taken into account when daily temperatures do not exceed the maximum or minimum threshold considered, as in the present study. The use of the different methods depends on the available information and the objective of the thermal time estimation.

Acknowledgments

The authors thank the National Center for Coffee Research (Centro Nacional de Investigaciones de Café, Cenicafé) for providing data from the Coffee Meteorological Network and funding for this study. The meteorological data are available at https://agroclima.cenicafe.org/home

Literature cited

Arnold, C.Y. 1959. The determination and significance of the base temperature in a linear heat unit system. Proc. Amer. Soc. Hort. Sci. 74, 430-445. [ Links ]

Baskerville, G.L. and P. Emin. 1969. Rapid Estimation of heat accumulation from maximum and minimum temperatures. Ecology.50, 514-517. Doi: 10.2307/1933912. [ Links ]

Bonhomme, R. 2000. Bases and limits to using "degree.day" units. Eur. J. Agron. 13, 1-10. Doi: 10.1016/S1161-0301(00)00058-7. [ Links ]

Bryant, S.R., J.S. Bale, and C.D. Thomas. 1998. Modification of the Triangle method of degree-day accumulation to allow for behavioral thermoregulation in insects. J. Appl. Ecol. 35, 921-927. Doi: 10.1111/j.1365-2664.1998.tb00009.x. [ Links ]

Camargo, A.D. and A.R. Pereira. 1994. Agrometeorology of the coffee crop. World Meteorological Organization, 92. Geneva, Switzerland. [ Links ]

Cardina, J., C.P. Herms, D.A. Herms, and F. Forcella. 2007. Evaluating phenological indicators for predicting giant foxtail (Setaria faberi) emergence. Weed Sci. 55, 455-464. Doi: 10.1614/WS-07-005.1. [ Links ]

Carlson, J.D. and J.F. Hancock.1991. A methodology for determining suitable heat-unit requirements for harvest of highbush blueberry. J. Amer. Soc Hort. Sci. 116 (5), 774-779. [ Links ]

Cesaraccio, C., D. Spano, P. Duce, and R.L. Snyder. 2001. An improved model for degree-days from temperature data. Int. J. Biometeorol. 45, 161-169. Doi: 10.1007/s004840100104. [ Links ]

Cross, H.Z. and M.S. Zuber. 1972. Prediction of flowering dates in maize based on different methods of estimating thermal units. Agron. J. 64, 351-355. Doi: 10.2134/agronj1972.00021962006400030029x. [ Links ]

Durand, R., R. Bonhomme, and M. Derieux. 1982. Seuil optimal des sommes de température: application au maïs (Zea mays L.). Agronomie 7, 589-597. [ Links ]

Gilmore, E.C. and J.S. Rogers. 1958. Heat units as a method of measuring maturity in corn. Agron. J. 50, 611-615. Doi: 10.2134/agronj1958.00021962005000100014x. [ Links ]

Gordon, R. and A. Bootsma. 1993. Analyses of growing degree-days for agriculture in Atlantic Canada. Clim. Res. 3, 169-176. Doi: 10.3354/cr003169. [ Links ]

Hatfield, J.L. and J.H. Prueger. 2015. Temperature extremes: Effect on plant growth and development. Weather and Climate Extremes. 10, 4-10. Doi: 10.1016/j.wace.2015.08.001. [ Links ]

Higley, L.G., L.P. Pedigo, and K.R. Ostlie. 1986. DEGDAY: a program for calculating degree-days, and assumptions behind the degree-day approach. Environ. Entomol. 15, 999-1016. Doi: 10.1093/ee/15.5.999. [ Links ]

Jaramillo, R.A. and M.O. Guzmán.1984. Relación entre la temperatura y el crecimiento en Coffea arabica L., variedad caturra. Cenicafé. 35(3), 57-65. [ Links ]

Johnson, I.R. and J.H.M. Thornley. 1985. Temperature dependence of plant and crop processes. Ann. Bot. 55, 1-24. [ Links ]

Kean, J.M. 2013. How accurate are thermal accumulation methods for predicting phenology in New Zealand. N.Z. Plant Prot. 66, 124-131. [ Links ]

Lima, E.P. and E.L. da Silva. 2008. Temperatura base, coeficientes de cultura e graus-dia para cafeeiro arábica em fase de implantação. R. Bras. Eng. Agríc. Ambiental. 12(3), 266-273. Doi: 10.1590/S141543662008000300007. [ Links ]

Lindsey, A.A. and J.E. Newman. 1956. Use of official weather data in spring time: temperature analysis of an indiana phenological record. Ecol. 37, 812-823. Doi: 10.2307/1933072. [ Links ]

Litschmann, T., I. Oukropec, and B. Kirzan. 2008. Predicting individual phenological phases in peaches using meteorological data. Hort. Sci. 35(2), 65-71. [ Links ]

McMaster, G.S. and W.W. Wilhelm. 1997. Growing degree-days: one equation, two interpretations. Agr. Forest Meteorol. 87, 291-300. Doi: 10.1016/S0168-1923(97)00027-0. [ Links ]

McMaster, G.S. 1993. Another wheat (Triticumspp.) model? Progress and applications in crop modeling. Riv. Agron. 27, 264-272. [ Links ]

Ometto, J.C. 1981. Bioclimatologia vegetal. Agronômica Ceres. São Paulo, Brazil. [ Links ]

Pedro-Junior, M.J., O. Brunini, R.R. Alfonsi, and L.R. Angelocci. 1977. Estimativa de graus-dia em função de altitude e latitude para o estado de São Paulo. Bragantia 36(1), 89-92. Doi: 10.1590/S0006-87051977000100005. [ Links ]

Pezzopane, J.R.M., M.J. Pedro, M.B. Paes, and L.C. Fazuoli. 2008. Exigência térmica do Café árabica cv. Mundo Novo no subperíodo florescimento-colheita. Ciênc. Agrotec. 32(6), 1781-1786. Doi: 10.1590/S1413-70542008000600016. [ Links ]

Pruess, K. 1983. Day-degree methods for pest management. Environ. Entomol. 12, 613-619. Doi: 10.1093/ee/12.3.613. [ Links ]

Raworth, D.A. 1994. Estimation of degree-days using temperature data recorded at regular intervals. Environ. Entomol. 23, 893-899. Doi: 10.1093/ee/23.4.893. [ Links ]

Rodríguez, C.D., J.M. Cotes, and J.R. Cure. 2012. Comparision of eight degree-days estimation methods in four agroecological regions in Colombia. Bragantia 71(2), 299-307. Doi: 10.1590/S0006-87052012005000011. [ Links ]

Roltsch, W.J., F.G. Zalom, A.J. Strawn, J.F. Strand, and M.J. Pitcairn. 1999. Evaluation of several degree-day estimation methods in California climates. Int. J. Biometeorol. 42, 169-176. Doi: 10.1007/s004840050101. [ Links ]

SAS Institute. 2012. The SAS system for Windows. Release 9.4. SAS Institute. Cary, NC, USA. [ Links ]

Sharpe, P.J.H. and D.W. DeMichele. 1977. Reaction kinetics of poikilotherm development. Theor. Biol. 64, 649-670. Doi: 10.1016/0022-5193(77)90265-X. [ Links ]

Snyder, R.L. 1985. Hand calculating degree days. Agr. Forest Meteorol. 35(1-4), 353-358. Doi: 10.1016/0168-1923(85)90095-4. [ Links ]

Snyder, R.L., D. Spano, C. Cesaraccio, and P. Duce. 1999. Determining degree-day threshold from field observations. Int. J. Biometeorol. 42, 177-182. Doi: 10.1007/s004840050102. [ Links ]

Snyder, R.L., D. Spano, and P. Duce. 2013. Weather station siting: Effects on phenological models. pp. 345-361. In: Shwartz, M.D. (ed.). Phenology: An integrative environmental science. Springer Verlag, Berlin, Germany. [ Links ]

Souza, A.P.R., C.M. Carvalho, A.D. Lima, H.O. Florentino, and J.F. Escobedo. 2011. Comparison of methodologies for degree-day estimation using numerical methods. Acta Sci-Agron. 33(3), 391-400. Doi: 10.4025/actasciagron.v33i3.6018. [ Links ]

Villa-Nova, N.A., Jr., M.J. Pedro, A.R. Pereira, and J.C. Ometo. 1972. Estimativa de grausdia acumulados acima de qualquer temperatura base, em função das temperaturas máximas e mínima. Caderno de Ciências da Terra Instituto de Geografia Uniersidade de São Paulo 30, 1-8. [ Links ]

Wang, J.Y. 1960. A critique of the heat unit approach to plant response studies. Ecol. 41, 785-790. Doi: 10.2307/1931815. [ Links ]

Worner, S.P. 1988. Evaluation of diurnal temperature models and thermal summation in New Zealand. J. Econ. Entomol. 81, 9-13. Doi: 10.1093/jee/81.1.9. [ Links ]

Received: May 25, 2017; Accepted: October 31, 2017

* Corresponding author: andresunigarro@gmail.com

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License