SciELO - Scientific Electronic Library Online

 
vol.18 issue1EVALUATION OF THE AVOBENZONE PHOTOSTABILITY IN SOLVENTS USED IN COSMETIC FORMULATIONSANTIQUORUM SENSING ACTIVITY OF ESSENTIAL OILS ISOLATED FROM DIFFERENT SPECIES OF THE GENUS Piper author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Vitae

Print version ISSN 0121-4004

Vitae vol.18 no.1 Medellín Jan./Apr. 2011

 

PHARMACEUTICAL INDUSTRY

 

APPARENT MOLAR VOLUMES OF THE BETA-ADRENERGIC BLOCKER PROPRANOLOL-HCl IN AQUEOUS MEDIA AT SEVERAL TEMPERATURES

 

VOLÚMENES MOLARES APARENTES DEL AGENTE BETA-BLOQUEADOR PROPRANOLOL-HCl EN MEDIOS ACUOSOS A DIFERENTES TEMPERATURAS

 

 

Daniel R. DELGADO1; Edgar F. VARGAS2; Fleming MARTÍNEZ1*

1 Grupo de Investigaciones Farmacéutico-Fisicoquímicas. Departamento de Farmacia. Facultad de Ciencias. Universidad Nacional de Colombia. A.A. 14490. Bogotá D.C., Colombia.

2 Laboratorio de Termodinámica de Soluciones. Departamento de Química. Facultad de Ciencias. Universidad de los Andes. Bogotá D.C., Colombia.

* Corresponding author: fmartinezr@unal.edu.co.

 

Received: 29 January 2010
Accepted: 27 October 2010

 


ABSTRACT

Propranolol-HCl is a non selective β-adrenergic blocker widely used in the treatment of several cardiovascular diseases; nevertheless, the physicochemical information about its volumetric behavior and other aqueous properties is not complete at present. In this context, densities of aqueous solutions of propanolol-HCl have been measured in this research as a function of concentration (from 0.0500 to 0.2500) mol kg–1 at several temperatures, i.e. (278.15, 283.15, 288.15, 293.15, 298.15, 303.15, 308.15 and 313.15) K. These values have not been reported earlier in the literature. The apparent molar volumes and partial molar volumes at infinite dilution for the electrolyte drug were calculated. Otherwise, the partial molar volumes at infinite dilution and the partial molar expansibilities for the drug as molecular form were also calculated. The dependence of these properties on temperature is presented. The results are interpreted in terms of several solute-solvent interactions. Ultimately, the reported information can be useful to understand the intermolecular events exhibited by this drug in pharmaceutical and biological systems.

Key words: Propranolol, apparent molar volume, molar expansibility, dissolution, chemical thermodynamics.


RESUMEN

El Propranolol-HCl es un agente bloqueador β-adrenérgico no selectivo ampliamente usado en el tratamiento de varias enfermedades cardiovasculares; sin embargo, la información fisicoquímica acerca de su comportamiento volumétrico, así como de otras propiedades fisicoquímicas, aún es incompleta en la actualidad. Por esta razón, en este artículo se presentan los valores de densidad de algunas soluciones acuosas de este fármaco en función de la concentración (desde 0,0500 hasta 0,2500) mol kg–1 a diferentes temperaturas (278,15, 283,15, 288,15, 293,15, 298,15, 303,15, 308,15 y 313,15) K. Estos valores no habían sido reportados previamente en la literatura. Asimismo, se presentan los volúmenes molares aparentes y volúmenes molares parciales a dilución infinita del fármaco como electrolito, y de otro lado, los volúmenes molares parciales a dilución infinita del fármaco molecular y las expansibilidades molares, los cuales fueron calculados a partir de los valores de densidad y composición de las mezclas. Los resultados obtenidos se interpretaron en términos de interacciones soluto-solvente. Finalmente, se tiene que la información presentada en este trabajo podría ser utilizada para el entendimiento de algunos eventos moleculares exhibidos por este fármaco en sistemas farmacéuticos y biológicos.

Palabras clave: Propranolol, volumen molar aparente, expansibilidad molar, disolución, termodinámica química.


 

INTRODUCTION

Propranolol-HCl (PPN-HCl, which molecular structure is presented in figure 1) is a non selective β-adrenergic blocker widely used in the treatment of hypertension, angina pectoris, and cardiac disrhythmias (1, 2). Although PPN-HCl is widely used nowadays in therapeutics, its physicochemical information about volumetric behavior and other aqueous properties is not complete at present. Furthermore, it is well known that the pharmaceutical and biopharmaceutical behavior of drugs is strongly dependent on their physicochemical properties, especially, those of thermodynamic character (3). Thus, the solution thermodynamics in aqueous media for the molecular form has been presented in the literature (4), and the thermodynamics of the transfer between organic solvents with different hydrogen-bonding capability and aqueous media has also been presented (5). In this context, the study of molar volumes of pharmaceutical relevant compounds has been carried out to facilitate the design process of dosage forms, and for explaining the transfer mechanisms of drugs across biological membranes (6).

 

 

For these reasons, as a contribution to the generation and systematization of physicochemical information about the aqueous behavior of drugs, the main goal of this study was to evaluate the effect of concentration and temperature on the apparent molar volume of PPN-HCl in water. Taking into account such purpose, an interpretation in terms of solute-solvent interactions based on the corresponding volumetric behavior was developed.

 

MATERIALS AND METHODS

Chemicals

Propranolol-HCl of USP quality (7) from Shenzhen Sunrising Industry Co., Ltd., China (drug purity near to 0.999 in mass fraction) and distilled water (conductivity < 2 µS cm–1) were used in this research.

Preparation of PPN-HCl aqueous solutions

All PPN-HCl aqueous solutions were prepared by mass in quantities of 30.00 g using a Ohaus Pioneer TM PA214 analytical balance with a sensitivity of ± 0.1 mg, in drug concentrations from 0.0500 mol kg–1 to 0.2500 mol kg–1 in order to study nine solutions. This procedure implied an uncertainty value of ± 2 x 10–5 in molality.

Density determination

Density was determined at temperatures of 278.15, 283.15, 288.15, 293.15, 298.15, 303.15, 308.15 and 313.15 K by using a DMA 45 Anton Paar digital density meter connected to a Neslab RTE 10 Digital Plus (Thermo Electron Company) recirculating thermostatic water bath according to a procedure previously described (6). The equipment was calibrated according to the Instruction Manual using air and water at the different temperatures studied (8). Volumes near to 3.0 cm3 were employed in all the density determinations. All volumetric properties were calculated from the experimental density values and solution compositions according to the equations presented earlier (6).

 

RESULTS AND DISCUSSION

The experimental densities of PPN-HCl in water at the range of 278.15 to 313.15 K are shown in table 1. The apparent molar volumes (φV) were calculated by using equation 1.

 

In this equation, M2 is the molecular mass of the solute; ρ0 and ρ are the densities of solvent and solution respectively, and m is the solution concentration expressed as molality.

Table 1 summarizes the results of the apparent molar volumes of PPN-HCl, their molal concentrations and their uncertainties. Uncertainty values were calculated according to the law of propagation of uncertainties (9). It is clear that φV values decrease as the temperature increases for the same drug concentration. Moreover, φV values decrease as the drug concentration increases at almost all temperatures except at 278.15 K.

The φV dependence regarding the drug molal concentration (at all the temperatures studied) was fitted to equations of the following type (10):

 

In equation 2, is the apparent molar volume at infinite dilution (equal to the partial molar volume at infinite dilution); SV is an experimental parameter (related to the water-structure promotion or disruption), and m is the molality once again. Values of (for PPN-HCl) and SV were obtained by means of weighted least-squares, and the numerical values together with their uncertainties are shown in table 2.

 

 

Using the principle of volume additivity, the apparent molar volume at infinite dilution of PPN-HCl can be separated into individual ionic contributions according to the following equation (11, 12):

 

In such equation, are the partial molar volumes of free base and HCl, respectively. Data of were taken from the literature (13). Values of (for the molecular form) obtained from equation 3 at each temperature studied are shown in table 3. values calculated from the literature data are also shown in this table.

 

 

The variation of with regard to the temperature was adjusted by the method of weighted least squares according to the following linear empiric equation (with r2 equal to 0.87):

 

 

In this equation, T is the temperature in Kelvin.

Figure 2 shows the dependence of on T. Furthermore, the partial molar expansibility at infinite dilution (Eφ0) can be calculated from Equation 4 by differentiating it according to the temperature as follows: .

 

 

The value of Eφ0 is 0.346 ± 0.029 cm3 mol–1 K–1.

According to table 3, the data reported by Ruso et al. (14) show significant differences in compared with the data obtained in this study. However, significant similarity was found with the values reported by Iqbal et al., 1994, 1989 (12, 15) at 298.15 and 308.15 K. Nevertheless, we cannot explain the differences found between data reported in this study and the one of Iqbal et al., 1994, 1989 (12, 15) regarding the data reported by Ruso et al., 2004 (14).

The sign of the SV parameter in equation 2 can be associated with the influence of the solute upon water. This structural influence can be described in terms of structure promotion or structure-breaking effects of the solute on the surrounding water medium (16, 17). Negative SV values were found for some solutes such as tetraakylamonium salts, which are typical ionic surfactants, characterized by their water-structure promotion effect (17-20). In this type of solutes, the hydrophobic effect becomes dominant compared with the hydrophilic effect; therefore, solvation around of the ionic moiety decreases. According to table 3, the SV value is negative for all temperatures, except at 278.15 K. These observations can be interpreted in terms of the structure promotion effect of PPN on the water-structure at temperatures above 278.15 K.

In figure 2, it can be seen the tendency in which PPNincreases when the temperature increases. This result could be attributed to the breakage of the solvent structure, which causes an increase in the structural molar volume (19). As it was already stated, E0φ is positive and this can be explained according to the formation of ''clathrate-like'' structures as described by Wen and Saito, 1964 (17). Thus, when the concentration of PPN-HCl increases, the water cluster surrounding the ions tends to join their neighbors and form flickering cages, forcing the ions to get inside these cages. If these structures are heated, they would breakdown, leading to the expansion of the complete system (20).

 

CONCLUSION

From all previously discussed topics, it can be concluded that the volumetric behavior of PPN-HCl in aqueous media is dependent on both concentration and temperature. Based on the negative sign of the SV term obtained, it can be proposed that this drug acts as a water-structure promoter due to hydrophobic effect around its non-polar moieties. Ultimately, the data presented in this report fulfills the purpose of expanding the physicochemical information about electrolyte drugs in aqueous solutions.

 

ACKNOWLEDGEMENTS

We would like to thank the DIB-DINAIN of the Universidad Nacional de Colombia (UNC) for the financial support, and the Department of Pharmacy of UNC for putting the required equipment and laboratories to our service.

 

REFERENCES

1. Hardman JG, Limbird LE, Gilman AG, editors. Goodman & Gilman's. The Pharmacological Basis of Therapeutics. 9th ed. New York, USA: McGraw-Hill; 1995. Hoffman BB, Lefkowitz RJ. Catecholamines, sympathomimetic drugs, and adrenergic receptor antagonists; p. 199-248.         [ Links ]

2. Budavari S, O'Neil MJ, Smith A, Heckelman PE, Obenchain Jr. JR, Gallipeau JAR et al. The Merck Index: An Encyclopedia of Chemicals, Drugs, and Biologicals. 13th ed. Whitehouse Station, NJ, USA: Merck & Co., Inc.; 2001.         [ Links ]

3. Martin A, Bustamante P, Chun AHC. Physical Pharmacy: Physical Chemical Principles in the Pharmaceutical Sciences. 4 ed. Philadelphia, USA: Lea & Febiger; 1993.         [ Links ]

4. Reyes AC, Triana MT, Jimenez-Kairuz AF, Manzo RH, Martínez F. Thermodynamics of partitioning of propranolol in some organic solvent/buffer systems. J Chem Eng Data. 2008 Oct 31; 53 (12): 2810-2815.        [ Links ]

5. Triana MT, Reyes AC, Jimenez-Kairuz AF, Manzo RH, Martínez F. Solution and mixing thermodynamics of propranolol and atenolol in aqueous media. J Solution Chem. 2009; 38 (1): 73-81.         [ Links ]

6. Martínez F, Gómez A, Ávila CM. Volúmenes molales parciales de transferencia de algunas sulfonamidas desde el agua hasta la mezcla agua-etanol (X = 0.5). Acta Farm Bonaerense. 2002; 21 (2): 107-118.        [ Links ]

7. US Pharmacopeia 23 ed. Rockville, MD, USA: United States Pharmacopeial Convention, 1994. p. 1327-1328.         [ Links ]

8. Kratky O, Leopold H, Stabinger H. DMA45 Calculating Digital Density Meter, Instruction Manual. Graz, Austria: Anton Paar, KG; 1980. p. 1-12.        [ Links ]

9. Taylor BN, Kuyatt CE., Guidelines for evaluating and expressing the uncertainty of NIST measurement results, Technical Note 1297. Gaithersburg, MD, USA: United States Department of Commerce, National Institute of Standards and Technology, 1994.        [ Links ]

10. Millero FJ. The molal volumes of electrolytes. Chem Rev. 1971 Apr; 71 (2): 147-176.        [ Links ]

11. Marcus Y. Ionic volumes in solution. Biophys Chem. 2006 Dec; 124 (3): 200-207.        [ Links ]

12. Iqbal M, Asghar-Jamal M, Ahmed M, Ahmed B. Partial molar volumes of some drugs in water and ethanol at 35°C. Can J Chem. 1994; 72 (4): 1076-1079.        [ Links ]

13. Pogue R, Atkinson G. Apparent molal volumes and heat capacities of aqueous HCl and HClO4 at 15-55 °C. J Chem Eng Data. 1988 Oct; 33 (4): 495-499.         [ Links ]

14. Ruso JM, González-Pérez A, Prieto G, Sarmiento F. A volumetric study of two related amphiphilic beta-blockers as a function of temperature and electrolyte concentration, Colloid Surface B. 2004 Feb 15; 33 (3-4): 165-175.         [ Links ]

15. Iqbal M, Verall RE. Apparent molar volume and adiabatic compressibility studies of aqueous solutions of some drug compounds at 25°C. Can J Chem. 1989; 67 (4): 727-735.        [ Links ]

16. Franks F, Smith HT. Apparent molal volumes and expansibilities of electrolytes in dilute aqueous solution. Trans Faraday Soc. 1967; 63: 2586-2598.        [ Links ]

17. Wen WY, Saito S. Apparent and partial molal volumes of five symmetrical tetraalkylammonium bromides in aqueous solutions. J Phys Chem. 1964; 68 (9): 2639-2644.         [ Links ]

18. De Lisi R, Milioto S, Verrall RE. Partial molar volumes and compressibilities of alkylmethylammonium bromides. J Solution Chem. 1990; 19 (7): 665-692.         [ Links ]

19. Blanco LH, Salamanca YP, Vargas EF. Apparent molal volumes and expansibilities of tetraalkylammonium bromides in dilute aqueous solutions. J Chem Eng Data. 2008 Nov 16; 53 (12): 2770-2776.         [ Links ]

20. Gopal R, Siddiqi MA. The variation of partial molar volume of some tetraalkylammonium iodides with temperature in aqueous solutions. J Phys Chem. 1968; 70 (5): 1814-1817.        [ Links ]

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License