SciELO - Scientific Electronic Library Online

 
vol.9 issue1EVALUATION AND IMPLEMENTATION OF HIGH DENSITY POLYETHYLENE LINER: ALTERNATIVE OF SOLUTION TO CORROSION-WEAR PROBLEMS IN FLOWLINESENVIRONMENTAL SENSITIVITY INDEX FOR OIL SPILLS IN COLOMBIAN RIVERS (ESI-R): APPLICATION FOR THE MAGDALENA RIVER author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


CT&F - Ciencia, Tecnología y Futuro

Print version ISSN 0122-5383On-line version ISSN 2382-4581

C.T.F Cienc. Tecnol. Futuro vol.9 no.1 Bucaramanga Jan./June 2019

https://doi.org/10.29047/01225383.154 

Original articles

A NEW DATABASE OF ON-ROAD VEHICLE EMISSION FACTORS FOR COLOMBIA: A CASE STUDY OF BOGOTA

UNA NUEVA BASE DE DATOS PARA FACTORES DE EMISIÓN DE FUENTES MÓVILES EN COLOMBIA: UN CASO DE ESTUDIO PARA BOGOTÁ

Jhonathan Ramíreza 

Jorge E Pachóna  * 

Oscar M Casasb 

Sandro F Gonzálezb 

a Universidad de La Salle, Centro Lasallista de Investigación y Modelación Ambiental CLIMA, Bogotá, Colombia.

b Ecopetrol - Instituto Colombiano del Petróleo, km 7 vía Bucaramanga- Piedecuesta, C.P 681011, Piedecuesta Colombia


ABSTRACT

Mobile sources contribute directly or indirectly with most of the atmospheric emissions in Colombian cities. Quantification of mobile source emissions rely on emission factors (EF) and vehicle activity. However, EF for vehicles in the country have not evolved at the same time as fleet renovation and fuel composition changes in the last few years. In fact, estimated EF before 2010 may not reflect the reduction of sulfur content in diesel and the renovation and deterioration of passenger vehicles; therefore, emission levels may be over or under estimated. To account for these changes, we have implemented the MOVES model in Bogota and obtained a new database of on-road vehicle emission factors. For this purpose, local information of activity rates, speed profiles, vehicle population distribution and age, meteorology and fuel composition was used. Emissions were estimated with these new set of EF and compared with previous inventories. We observed large reductions in SO2 (-87%), CO (-65%) and VOC (-62%) emissions from mobiles sources and lower reductions in NOx (-20%). Other pollutants such as PM25 (+15%) and CO2 (+28%) reported increases. This paper includes a new database of on-road vehicle emission factors for Bogota, which can be applied in other Colombian cities in the absence of local data.

KEYWORDS: Emission Factors; Fuel composition; MOVES Vehicle technology; Emission inventory

RESUMEN

Las fuentes móviles emiten directa o indirectamente la mayor cantidad de contaminantes a la atmósfera en Colombia. La construcción de inventarios de emisiones de fuentes móviles requiere de factores de emisión (FE) e información de actividad vehicular. Sin embargo, los FE en el país no han sido ajustados adecuadamente a las nuevas condiciones de calidad de combustible y renovación del parque vehicular que ha ocurrido en los últimos años. En efecto, los FE estimados con anterioridad al año 2010 no reflejan la reducción del azufre en el combustible diésel ni la renovación o deterioro del parque vehicular. Con el fin de tener en cuenta éstos cambios se ha implementado en Bogotá el modelo MOVES, con el cual se ha obtenido una nueva base de datos de factores de emisión. El modelo requiere información local sobre actividad vehicular, distribución y edad del parque, perfiles de velocidad, meteorología y características del combustible. Los FE estimados con MOVES fueron comparados con los existentes a nivel local y se construyó un nuevo inventario. Se observa una reducción considerable en las emisiones de SO2 (-87%), CO (-65%) y VOC (-62%) y una reducción menor en las emisiones de NOx (-20%). En el caso de PM25 (+15%) y CO2 (+28%) se registró un leve aumento. Este manuscrito pone a disposición del lector una nueva base de datos de FE para fuentes móviles en Bogotá, que podrían aplicarse en otras ciudades colombianas en ausencia de información local.

PALABRAS CLAVE: Factores de emisión; Calidad de combustible Modelo MOVES; Tecnología vehicular; Inventario emisiones

1. INTRODUCTION

Air pollution is a major problem worldwide and responsible for a large number of premature deaths and respiratory diseases [1]-[4]. Different policies have been established around the world to improve air quality, such as the use of cleaner fuels, better emission control technologies, alternative fuels for industry and mobile sources, among others [5]. In order to improve air quality in different countries, many agencies, industries and governments work together to create the partnership for clean fuels and vehicles [6],[7].

Bogota has established different policies and projects to mitigate and abate its air pollution problem, especially by organizing and improving its public transportation system. This is possible given the fuel quality available in Colombia since 2010 (50ppm of sulfur in diesel and 270ppm in gasoline) [8]. The city is also working in the implementation of emission control devices for mobile and point sources. To account for emission reductions in mobile sources, it is necessary to keep a reliable database of emission factors.

During the last decade, local studies have estimated emissions from mobile and point sources using emission factors (EF) from international references or obtained from emission models. For example, the International Vehicle Emission (IVE) model has been used to produce emission factors for Bogota [9],[10] and Cali [11]. In 2008, Bogota's Environmental Agency (SDA) developed a ten-year air pollution abatement plan (PDDAB) [12], where emission factors from IVE were used. Additionally, local studies have measured exhaust emissions from a sample of vehicles and calculated EFs for the city [13],[14].

Emission factors (EF) for mobile sources have not evolved at the same time as fleet renovation and fuel composition changes in the country in recent years. For example, in 2008 the sulfur content in diesel was substantially reduced from 1,000 to 500 ppm and subsequently to 50 ppm in 2010 [15]. Emission factors found in the PDDAB were designed prior to 2009 and do not reflect any change in sulfur fuel composition. Similarly, emission factors for passenger vehicles in the PDDAB do not consider vehicle age and effects from renovation and deterioration on emission levels.

MOVES is the state-of-the-art model designed by the US-EPA to estimate EFs or inventories in project or county areas using local data [16]. MOVES has the capability to estimate the change in EF related to fuel reformulation, fleet age and composition, and local meteorology [17],[18]. This capability was the reason to choose MOVES for this project.

2. EXPERIMENTAL DEVELOPMENT

The MOVES model uses local information to estimate emissions and EF from mobile sources. We used the MOVES 2014a-20151201 version of the model. MOVES was executed in county mode and the input database included only local information: vehicle age (30 years from 1984-2014), number and activity (average kilometers traveled - activity factor (AF)), meteorology, fuel composition, road types and speed profiles. AF information was obtained from the local environmental agency [12]. The original vehicular database was processed to remove outliers. The vehicle activity was estimated using the total km travelled per vehicle and the vehicle age. Finally, the AF is the average of all vehicle activity reported by category. The bus rapid transit (BRT) was reported directly by Transmilenio S.A. Equation 1 summarizes the validation process.

VA: Vehicle age (years)

TD: Travelled Distance (km)

AF ¡ : Activity factor vehicle i (km/year)

N ¡ : number of vehicles i

Vehicle number was taken from the Colombian vehicle database (RUNT) [19]. RUNT comprises every vehicle registration made in the country by municipality. This information was validated by the local environmental agency considering vehicle age, condition and registration place. The database was modified removing vehicles older than 50 years (not allowed to ride in Bogota), incomplete registrations and off-road machinery. Then the vehicles were aggregated per model year, fuel type and vehicle category (Table 1).

Table 1 Vehicle number and activity factors for Bogota. In Fuel D: Diesel, P: Petrol, VNG: Vehicle Natural Gas. Adapted from (SDA - Secretaría Distrital de Ambiente, 2015). 

Fuel formulation was obtained from national regulations on fuel composition [15] and meteorological data (temperature and relative humidity) were obtained from the Bogota's Air Quality Monitoring Network (RMCAB). Vehicle speed profiles were built from local traffic records in different corridors, which include only three vehicle categories: public transport (buses), private transport (taxis) and passenger vehicles [20]. Therefore, speed profiles for other vehicle types were assumed for the existing records, i.e., truck speed profiles from buses and motorcycle speed profiles form passenger vehicles. This assumption considers that short-haul trucks and buses ride on the same roads and have similar vehicular weight. Furthermore, motorcycles and commercial trucks used the same roads as passenger vehicles and are subjected to the same speed limits.

Once MOVES databases were built, a sensibility analysis was conducted to assess the impact of three input parameters in emission factors: i) meteorological variables: two months were selected, one of high temperature and one of low temperature; ii) fuel composition: 15 scenarios were used to estimate the effect of sulfur content, aromatic content, Reid vapor pressure (RVP) and distillation curves T50 and T90 changing a variable per model run; iii) emission generation processes: running exhaust, evaporation, fuel venting and running crankcase were evaluated for two vehicle categories (passenger vehicles and transit buses). This sensibility analysis was conducted to optimize model execution times and define fuel quality properties influencing emissions. Sensitivity analysis using biofuels (ethanol in gasoline and biodiesel) were out of the scope of this work, but local studies can be found anywhere else [21].

For MOVES application in Bogota, a standardization process was conducted between the US fleet and the local fleet based on vehicle characteristics such as passenger capacity, vehicle weight, engine power and emission standard associated with emission control technologies. First, comparing vehicle size, activity and engine power between Bogota fleet and US fleet, six vehicle categories were selected to run MOVES. Once the vehicle categories were selected, it was necessary to standardize the vehicle age between MOVES and Bogota's fleet. Emission control systems are directly related to vehicle age in MOVES. Table Al in the Annexes was built to ease future analysis in the city after comparing the emission standards between environmental agencies and the composition of the local fleet in Bogota.

Finally, MOVES was run with the local database and EFs were estimated for PM25, PMi0, CO, S02, C02, NOx and VOC species. We used the Fuel Type and Model Year function to aggregate EFs per category, fuel type and model year of the previous 30 years to the baseline scenario (1984-2014) (Figure 1). The emission inventory was estimated outside of the MOVES model with local data.

Figure 1 Summary process of MOVES implementation. 

EMISSION INVENTORY

Emission inventories for mobile sources in Bogota were built using local EFs available from the Environmental Authority. We estimated the inventory using EFs from MOVES and applying Equation 2.

E ij : Annual Emission of vehicle i and pollutant j (g/year)

EF ij : Emission factor for vehicle i and pollutant j (g/km) from MOVES

AF ¡ : Activity factor vehicle i (km/year)

N ¡ : number of vehicles i

As previously mentioned, EFij were estimated using MOVES and are available in the Annexes. Activity factors and number of vehicles were obtained from the local environmental agency as mentioned before.

3. RESULTS ANALYSIS

BACKGROUND INFORMATION

In order to run MOVES, a vehicle type equivalence analysis was necessary. Bogota has a mixed vehicle fleet between US, European and Asian brands. An equivalence between Bogota's fleet and the US (used in the MOVES model) was performed: we compared vehicle weight and control emission technology to standardize vehicle categories, including motorcycles. A major difference in the bus fleet was found: US buses in MOVES (transit, intercity and school) are significantly larger than buses in Bogota, especially those outside the bus rapid transit (BRT) system. Most of the public transport fleet are small buses with engine power from 150 to 170 HP and capacity of 45 to 50 passengers [22],[23], in comparison with US buses typically 220 HP and with passenger capacity of 75 [24], A similar problem exists with motorcycles and heavy-duty trucks. Motorcycle in US have an average engine power of 100 to 150 HP, while in Colombia the average power ranges between 65 HP and 100 HP. Therefore, MOVES outcomes may overestimate EFs for buses, heavy trucks and motorcycles in Bogota

Trucks in Bogota were standardized with single unit short-haul trucks in MOVES, considering short distances travelled in the city For such standardization, an equivalence between US [25],[26] and European [26],[27] emission standards was conducted, given that buses and trucks in Bogota, at large, have European engines, Nevertheless, the equivalence between Colombian and US heavy duty vehicles represents a major challenge and explains, partially, uncertainty in the results. Once control devices were matched to US technology standards, the application of MOVES was possible (see Table A1 Annexes).

In Summary, selected fleet categories to run MOVES in Bogota are shown in Table 2.

Table 2 Selected categories in MOVES. Passenger vehicles and taxis definition [28], Transit bus, Passenger trucks and heavy vehicles definition [29], GVWR: gross vehicle weight rating. 

For vehicle speed profiles, the MOVES speed bin profile was determined using a frequency distribution with the local monitor's data. Each bin represents a speed range in MOVES (Table 3). Profiles for passenger vehicles and public transport account for over 70% of vehicle behavior on speed bins 3, 4 and 5. Thus, the average speed in Bogota is 28 km/h for passenger vehicles and 23 km/h for public transport vehicles, which is a relatively low speed for an urban center given the traffic congestion at almost any time. In fact, Bogota is ranked as the 5th most congested city in the world [30].

Table 3 Vehicle speed profile (fractions) for Bogota. 

Data source: SDM [20].

SENSITIVITY ANALYSIS

The first sensitivity analysis was aimed at assessing the impact of meteorology and time of the day on EF estimates. The impact of temperature and relative humidity was negligible (less than 5%) Pollutants such as S02, PM10 and PM25 did not show any changes; this is related to small differences in temperature in the city along the day. On the other hand, CO and VOC pollutants show increases in early and late hours and a decrease at noon. The increases in early and late hours are related to temperature, as lower temperatures decrease the catalytic efficiency [31], On the contrary, NOx emissions tend to increase with higher temperatures [32],[33], The greatest temperature change is 6°C, showing ±3% change in EF and this could be considered negligible for the city, considering that Bogota has no seasons and temperature and relative humidity are mostly constant over the year, expecting negligible variations month by month. Therefore, we decided to use one hour (12pm) and one month (February) to estimate EFs for the city.

The second sensitivity analysis was to assess fuel composition Comparing 15 fuel composition scenarios, it was found that changing sulfur content in gasoline fuel (Table 4) generates the biggest changes in EFs while changing fuel distillation parameters (T50 and T90) affects VOC and CO EFs but other pollutants less than 2%. A lower sulfur content decrease S02 emissions and improves combustion reducing simultaneously VOC, CO, NOx and PM [34] increasing the temperature of T50 and T90 decreases CO emissions but also increases VOC emissions [35], Finally, decreasing aromatic content in the fuel reduces the CO, NOx and VOC EFs. On the other hand, diesel EFs are mainly affected by changes in sulfur content and cetane index (Table 5). When sulfur content is reduced, S02 and PM emission factors decrease and when the cetane index is increased, the PM, CO and VOC are reduced dueto better combustion conditions [35]-[37], MOVES is not sensitive to other changes in the diesel formulation, but when more than one parameter is changed at a time, MOVES estimates a combined effect between those parameters.

Table 4 Sensitivity analysis of gasoline quality parameters on Emission Factor changes. 

(0: no change, ±0: -2% to 2%, ↓-↑: 2% to 10%, ↓↓-↑↑: 10% to 20%, ↓↓↓-↑↑↑: 20% to 40%, ↓↓↓↓-↑↑↑↑: >40).

Table 5 Sensitivity analysis of diesel quality parameters on Emission Factor changes. 

(0: no change, ±0: -2% to 2%, ↓-↑: 2% to 10%, ↓↓-↑↑: 10% to 20%, ↓↓↓-↑↑↑: 20% to 40%, ↓↓↓↓-↑↑↑↑: >40%).

The third sensitive analysis was focused on assessing the emission process contribution to EF. Four processes were used for the evaluation: running exhaust (RE), evaporation permeability (EP), fuel venting (FE) and running crankcase (RC) (Table 6). RE are the main source of emission with 98% contribution for most of pollutants except for VOC, which have a 90% contribution. EP and RC emission was found to be negligible for all pollutants. FV contributes with 9% of VOC emission for passenger vehicles and had no contribution in Transit buses. Only RE EFs were selected to be applied on emission inventories.

Table 6 Contribution of Emission Factors per emission generation processes. 

(R.E: Running exhaust, E.P: Evaporation permeability, F.V:

Fuel venting in gasoline vehicles, R.C: Running crankcase)

ESTIMATING LOCAL EFs

A weighted average was applied to the EFs obtained from MOVES by vehicle category, vehicle model year and fuel consumed (Figure 1). A database with weighted averaged EFs is available in Table A2 in Annexes. Comparing the newer vehicle technology with the previous one, the S02 EFs changes are negligible when the fuel composition is not changed, so the model estimates the S02 EFs with the average fuel consumption and the sulfur content in fuel, i.e., 50 ppm for diesel and 270 ppm for gasoline. For CO, NOx and VOC pollutants, the newer technologies present greater reductions related to new emission control technologies and improvements in the combustion process [26],[35],[38], The reduction of CO and NOx emissions is consistent with the application of the life-cycle assessment LCA model in Bogotá [39], Finally, the PM emission factors show the largest changes comparing old vs new vehicles. The model reflects improvements in emission controls applied in recent decades, especially on diesel vehicles.

Estimated EFs from MOVES were compared with previous EFs used by the local environmental agency (SDA) named hereafter LOCAL. This comparison was made by each vehicle type performing standardization between the US and Bogota's fleet (see Table Al Annexes). The largest change in EFs was in S02 and diesel vehicles (Table 7 and Table 8). In all vehicle categories, S02 EFs were significantly reduced from local to MOVES estimates. This is explained by the reduction in sulfur content in fuels during the Last years.

Table 7 Emission factors obtained from MOVES for gasoline vehicles. PV: Passenger vehicle, M2: 2-stroke engine motorcycle, M4: 4-stroke engine motorcycle, PT: Passenger trucks. 

Source for Local Efs: SDA [12].

Table 8 Emission factors obtained from MOVES for diesel vehicles. PT: Passenger trucks, SHT: short-haul trucks, CT commercial trucks, TB: Transit Bus. 

Source for Local EFs: SDA [12].

The CO and NOx EFs decrease in the gasoline fleet except for the two-stroke motorcycles. Reduction in emission of pollutants for passenger vehicles and pick-up trucks are explained by the fleet renovation that the city has experimented in recent years, especially in private vehicles. The increased emissions from motorcycles is caused by the difference in size and power between US and Colombia's motorcycles. VOC EFs decrease for all the categories due to more rigourous VOC controls implemented in the newer fleet. The inclusion of all models of passenger vehicles in MOVES, even the oldest ones, caused the EFs to be greater than those in the local database.

In diesel vehicles, Nox Efs for passenger trucks (PT), short-haul trucks (SHT) and transit buses (TB) estimated with MOVES are larger than Efs from the local database. This is especially significant for TB with an increase of 155% due to larger size and power of buses in the US in comparison to Colombia. VOC Efs are reduced for all categories explained to stricter evaporative emission controls implemented in recent years. There is a decrease in Efs for PM 2.5 for PT and commercial trucks (CT) and an Increase for SHT and TB. The increase can be explained by SHT and TB being of larger size and power In the US, while the decrease in PT and CT Is due to emission control and newer fleet.

EMISSION INVENTORY RESULTS

Using the new dataset of EFs in 2014 cause the mobile source emission inventory to differ from the 2012 version (Table 9). There is an Increase in PM (+15%) and C02 (+28%) emissions due to the growth of the vehicle fleet, and the changes in the PM25 emission factors for passenger vehicles, including old models in the MOVES model. The increase in the number of motorcycles also affect PM emissions because EFs for four-stroke motorcycles are 175% larger than those in the old database. The contribution of motorcycles to PM emissions in 2014 is 10% to the total PM from mobile sources. There may be some overestimation of emissions for motorcycles, but given the poor maintenance of this fleet, added to road conditions in the city, emissions can be actually greater. In fact, other studies in Bogota have found motorcycle PM25 emissions well above emission from all other vehicle categories [39]

The largest reduction in mobile source emissions was for S02 (-87%) which is explained by the reduction in sulfur content in diesel. CO and VOC emissions were reduced by 65 and 62% respectively due to fleet renovation in passenger cars and stricter VOC emission control in new cars. NOx emission has a marginal reduction of 20% due to reduction in EFs for commercial trucks and passenger cars. Although the vehicle fleet changes have an impact over emission in 2012 and 2014, the main changes are related to changes in EF, as shown in equation 1; emission depends on both factors but the vehicle fleet grew 8% [41] and changes in EF range from 6% to 155%, making a more significant difference in the emission inventory.

Table 9 Comparison of emission using local database EFs (2012) and MOVES EFs (2014). 

* source: SDA[40].

CONCLUSIONS

The motor vehicle emission model MOVES was implemented in Bogota with the best information available and an equivalence between vehicle categories in the US and Colombia However, it is recognized that vehicles in the US are larger in size and power compared to the Colombian fleet, especially in the case of motorcycles, trucks and buses.

New emission factors estimated with MOVES consider changes in fuel composition and fleet turnover that might not be reflected in EFs prior to 2008. Databases to input in MOVES also consider old passenger cars that were not previously accounted for, which have high emission rates,

EFs estimated with MOVES reflected the changes in sulfur content in fuels in past years. S02 emissions reduced significantly using this new set of EFs in comparison with local databases. The emission inventory and the changes in emissions that reflect MOVES with new vehicle technologies show that the best option to reduce emissions is to improve fuel quality and vehicle technology as a combined strategy

Older vehicles combination with new fuels doesn't make a great difference in emission factors, except in S02; as it had been stated by environmental agencies, it is necessary to implement fuel improvement with new vehicle technologies in order to achieve a better cost efficient emission reduction strategy.

A sensitivity analysis was performed with MOVES to explore the impact of different variables (temperature, sulfur content, aromatics content, RVP, distillation curves and emission process) in EFs. We found that temperature and humidity do not have a significant impact on EF as in Bogota there are no seasons. As regards gasoline, the most important variable is its sulfur content, which affects mostly S02, but also the CO, VOC, NOx and PM EFs, Furthermore, distillation curves and physical properties have an important effect on CO and VOC.

On the other hand, in diesel, the cetane index and sulfur content generate the most important changes in EFs. Increasing cetane Index reduces PM emissions. Decreasing sulfur reduces S02 and PM emissions,

MOVES could be implemented in other Colombian cities using a methodology similar to that described herein. The official Colombian database of vehicles, as well as local speed profiles and activity factors, provide an easy mechanism to compare and generate local and regional emission factors.

It should be noted that the EF must always be carefully used depending on each particular application; as a theoretical approach grouping several variables, results may differ from real Life emissions. Researchers are encouraged to analyze whether a particular EF suits a given requirement. The authors consider EF a dynamic topic subject to refining and improvement as information becomes available.

ACKNOWLEDGEMENTS

This project was funded by the Colombian Petroleum Institute - ECOPETROL, under agreement 5224377 with Universidad de La Salle. We thank local mobility (SDM) and environmental (SDA) agencies for the information supplied and their support.

References

[1] OMS, (2016). Calidad del aire (exterior y salud). [Online]. Available: https://www.who.int/es/news-room/fact-sheets/detail/ambient-(outdoor)-air-quality-and-health. [ Links ]

[2] Pope, C. A„ D. W. Dockery, and J. Schwartz, (1995). Review of epidemiological evidence of health-effects of particulate air-pollution, Inhal. Toxicol ., 7(1), 1-18, [ Links ]

[3] Dockery, D. W. et al, (1993). An assocation between air-pollution and mortality in six United-States cities, N. Engl. J. Med ., 329(24), 1753-1759. [ Links ]

[4] Bell, M. L, R. D. Morgenstern, and W. Harrington (2011). Quantifying the human health benefits of air pollution policies: Review of recent studies and new directions in accountability research, Environ. Set Policy. 14(4), 357-368. [ Links ]

[5] US-EPA, (2016). Amendments Related to: Tier 3 Motor Vehicle Emission and Fuel Standards, [ Links ]

[6] United Nations, (2005). Partnership for cean fuels and vehicles. [Online]. Available: http://drustage.unep,org/transport/pcfv/resources/publications. [ Links ]

[7] Borge, R. et al., (2014). Emission inventories and modeling reguirements for the development of air guality clans. Application to Madrid (Spain), Sci. Total Environ. 466-467, 809-819. [ Links ]

[8] Congreso de la Republica Colombia, (2005). Ley 1206 de 2005. Por medio de la cual se mejora la calidad de vida a través de la calidad del diesel y se dictan otras disposiciones. [ Links ]

[9] Herrera Montañez, D., (2007). Modelo de emisiones vehiculares para la ciudad de Bogotá (EVB), B.S thesis, Dept Civil and Env. Eng, Universidad de los andes. [ Links ]

[10] Giraldo Amaya, L. A. and E. Behrentz, (2005). Estimación del inventario de emisiones de fuentes móviles para la ciudad de Bogotá e identificación de variables pertinentes, M.S thesis, Dept Civil and Env. Eng Universidad de los Andes. [ Links ]

[11] Giraldo, K., (2011). Caracterización y estimación de emisiones vehiculares en la universidad autónoma de occidente. [ Links ]

[12] Secretaria Distrital de Ambiente, (2010). Plan Decenal de Descontaminación del aire para Bogotá, Bogotá. [ Links ]

[13] Rodríguez, P. andE. Behrentz , (2009). Actualización del inventario de emisiones de fuentes móviles para la ciudad de Bogotá, a través de mediciones directas, Universidad de Los Andes. [ Links ]

[14] Acevedo, H., (2013). Factores de remoción y límites máximos de emisiones con el uso de sistemas de control de emisiones y aceite sintético en motocicletas con motor de dos y cuatro tiempos, Bogotá. [ Links ]

[15] Ministerio de Ambiente Vivienda y Desarrollo Territorial, (2008). Ley 1205. [ Links ]

[16] USEPA, (2010). Motor Vehicle Emission Simulator (MOVES): User Guide for MOVES2010a (EPA-420-B-10-036, August 2010). [ Links ]

[17] Guevara, M. et al ., (2017). An emission processing system for air quality modelling in the Mexico City metropolitan area: Evaluation and comparison of the MOBILE6. 2-Mexico and MOVES-Mexico traffic emissions, 585, 882-900. [ Links ]

[18] Zhao, Y. and A. W. Sadek, (2013). Computationally-Efficient Approaches to Integrating the MOVES Emissions Model with Traffic Simulators, Procedia - Procedia Comput. Sci ., 19, 882-887. [ Links ]

[19] MINTRANSPORTE, (2015). Registro Único nacional de Transito. [ Links ]

[20] SDM, (2014). Cartilla Monitoreo Tránsito y Transporte Urbano 2014, Cart. Monit. Tránsito y Transp. Urbano, 53. [ Links ]

[21] Acevedo, H. and E. Florez, (2012). Particle matter from a diesel engine fueled with Jatropha curcas oil biodiesel and ultra-low sulphur diesel, CT&F- Ciencia, Tecnol.y Futur ., 5(1), 83-92. [ Links ]

[22] Chevrolet, (2016). Catalogo Ventas Chevrolet Minibus. [ Links ]

[23] SDA - Secretaría Distrital de Ambiente, (2015). Base de datos número de vehículos en Bogota. [ Links ]

[24] Cummins Inc, (2010). School Engines. [Online]. Available: https://cumminsengines.com/school-bus. [ Links ]

[25] JS-EPA, (2016). EPA Emission Standards Reference Guide. [Online]. Available: https://www.epa.gov/emission-standards-reference-guide. [ Links ]

[26] Cooper, E., M. Arioli, A. Carrigan, and J. Jain, (2012). Exhaust emissions of Transit buses: Sustainable Urban Transportation Fuels and Vehicles, 1-40. [ Links ]

[27] EEA, (2016). Dieselnet Emission standards. [Online]. Available: https://www.dieselnet.com/standards/. [ Links ]

[28] JS-EPA, (2011). Development of Emission Rates for Light-Duty Vehicles in the Motor Vehicle Emissions Simulator (MOVES2010). [ Links ]

[29] JS-EPA, (2014). MOVES2014 Software Design Reference Manual. [ Links ]

[30] Inrix, (2017). INRIX Global Traffic Scorecard. [Online]. Available: http://inrix.com/scorecard/. [ Links ]

[31] Roy, A. et al ., (2012). Effects of Temperature on Gasoline Exhaust VOC speciation, in USEPA's Annual Emissions inventory Conference. [ Links ]

[32] Kakaee, A.-H., P. Rahnama, and A. Paykani, (2015). Influence of fuel composition on combustion and emissions characteristics of natural gas/diesel RCCI engine, J. Nat. Gas Sci. Eng ., 25, 58-65. [ Links ]

[33] Gallardo, L., J. Escribano, L. Dawidowski, N. Rojas, M. de Fátima Andrade, and M. Osses, (2012). Evaluation of vehicle emission inventories for carbon monoxide and nitrogen oxides for Bogotá, Buenos Aires, Santiago, and São Paulo, Atmos. Environ ., 47(0), 12-19. [ Links ]

[34] JS EPA, (2013). The Effects of Ultra - Low Sulfur Gasoline on Emissions from Tier 2 Vehicles in the In -Use Fleet Final Report The Effects of Ultra - Low Sulfur Gasoline on Emissions from Tier 2 Vehicles in the In - Use Fleet Final Report. [ Links ]

[35] Zvirin, Y., M. Gutman, and L. Tartakovsky, (1998). Chapter 16 - Fuel Effects on Emissions. [ Links ]

[36] Walsh, M. P., (2004). The Impact of Fuel Parameters on Vehicle Emissions, 5th China/Asia Clean Fuels int. Conf ., (703). [ Links ]

[37] Wu, Y., G. Song, and L. Yu, (2014). Sensitive analysis of emission rates in MOVES for developing site-specific emission database, Transp. Res . Part D, 32, 193-206. [ Links ]

[38] Franco, V., M. Kousoulidou, M. Muntean, L. Ntziachristos, S. Hausberger, and P. Dilara, (2013). Road vehicle emission factors development: A review, Atmos. Environ ., 70, 84-97. [ Links ]

[39] Cuellar, Y., R. Buitrago, and L. Belalcazar, (2016). Life cycle emissions from a bus rapid transit system and comparison with other modes of passenger transportation, CT&F - Ciencia, Tecnol. y Futur ., 6(3), 123-134. [ Links ]

[40] SDA, S. D. de A., (2014). Informe del contrato 1467 de 2013 "Desarrollo e Implementaci(ó)n de un Modelo de Calidad del Aire para Bogot{á)" suscrito entre la SDA y la Universidad de La Salle., Bogot(á) D.C. [ Links ]

[41] SDA, S. D. de A., (2015). Composición de la flota vehicular en Bogotá año 2014. [ Links ]

ANNEXES

Table Al with the comparison of vehicle technologies in Bogota United states and European Union by vehicle type and model year and NOx and PM emission standard for heavy vehicles standardized between United states and European Union.

The first column presents the model year of the vehicle, the second and third one present the dominant passenger vehicle technology in Bogota and US for that specific year. The fourth, fifth and sixth columns present the dominant heavy vehicle technology in Bogota Europe and US for that specific year for PM control. The last two columns represent the differences between environmental agencies in US and Europe, where EPA was focused on PM control before the EEA. On the other hand, in the early 90s, EEA had a strong regulation concerning gas emissions. When using this table, select the technology of the vehicle by model, and then associate it to a model year, which will be the model year used in MOVES,

Table A1 Comparison of emission comparing the emission standards between environmental agencies and the composition of the local fleet in Bogota. 

Table A2 with EFs for all pollutants and all vehicle categories. Passenger vehicle, M2: 2-stroke engine motorcycle, M4: 4-stroke Fuel G: gasoline, D: diesel, PT: Passenger trucks, SHT: Short haul engine motorcycle, trucks, CT commercial trucks, SB: small buses, TB: Transit Bus, PV: Passenger vehicle, M2: 2-stroke engine motorcycle, M4: 4-stroke engine motorcycle.

Table A2 Database with weighted averaged EFs. 

Received: October 23, 2017; Revised: October 17, 2018; Accepted: November 01, 2018

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License