<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>0122-5383</journal-id>
<journal-title><![CDATA[CT&F - Ciencia, Tecnología y Futuro]]></journal-title>
<abbrev-journal-title><![CDATA[C.T.F Cienc. Tecnol. Futuro]]></abbrev-journal-title>
<issn>0122-5383</issn>
<publisher>
<publisher-name><![CDATA[Instituto Colombiano del Petróleo (ICP) - ECOPETROL S.A.]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S0122-53832011000100003</article-id>
<title-group>
<article-title xml:lang="en"><![CDATA[DOUBLE TORSION TESTING MACHINE TO DETERMINE THE SUBCRITICAL FRACTURE INDEX IN ROCKS]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Díaz-Guerrero]]></surname>
<given-names><![CDATA[Pedro-José]]></given-names>
</name>
<xref ref-type="aff" rid="A02"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Carvajal]]></surname>
<given-names><![CDATA[Jenny-Mabel]]></given-names>
</name>
<xref ref-type="aff" rid="A01"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Palencia-Muñoz]]></surname>
<given-names><![CDATA[Miguel-Fernando]]></given-names>
</name>
<xref ref-type="aff" rid="A03"/>
</contrib>
</contrib-group>
<aff id="A01">
<institution><![CDATA[,Ecopetrol S.A. Instituto Colombiano del Petróleo (ICP) ]]></institution>
<addr-line><![CDATA[Bucaramanga Santander]]></addr-line>
<country>Colombia</country>
</aff>
<aff id="A02">
<institution><![CDATA[,Universidad Industrial de Santander Escuela de Ingeniería Mecá;nica ]]></institution>
<addr-line><![CDATA[Bucaramanga Santander]]></addr-line>
<country>Colombia</country>
</aff>
<aff id="A03">
<institution><![CDATA[,Universidad Industrial de Santander Escuela de Ingeniería Mecá;nica ]]></institution>
<addr-line><![CDATA[Bucaramanga Santander]]></addr-line>
<country>Colombia</country>
</aff>
<pub-date pub-type="pub">
<day>01</day>
<month>06</month>
<year>2011</year>
</pub-date>
<pub-date pub-type="epub">
<day>01</day>
<month>06</month>
<year>2011</year>
</pub-date>
<volume>4</volume>
<numero>3</numero>
<fpage>37</fpage>
<lpage>45</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://www.scielo.org.co/scielo.php?script=sci_arttext&amp;pid=S0122-53832011000100003&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.co/scielo.php?script=sci_abstract&amp;pid=S0122-53832011000100003&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.co/scielo.php?script=sci_pdf&amp;pid=S0122-53832011000100003&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="en"><p><![CDATA[ABSTRACT This paper discusses the design methodology applied to build a testing machine to determine the subcritical fracture index in a rock, based on double torsion testing in order to characterize naturally fractured formations such as those located in the Colombian Llanos Foothill Basin. These formations have been subjected to cyclic loads over time, causing fractures that trend to spread at subcritical stress intensity values. Similarly, it presents the results of testing conducted on nine specimens of the Tambor Formation from 2 different outcrops to establish the testing traceability in the equipment.]]></p></abstract>
<abstract abstract-type="short" xml:lang="es"><p><![CDATA[RESUMEN El presente artículo desarrolla la metodología de diseño para construir un banco de pruebas que permita determinar el índice subcrítico de fractura en una roca a través del ensayo de doble torsión, con el objeto de caracterizar formaciones fracturadas de origen natural como las ubicadas en la Cuenca de Piedemonte Llanero Colombiano. Estas formaciones han sido sometidas a cargas cíclicas a través del tiempo las cuales ocasionan fracturas que tienden a propagarse a valores de intensidad de esfuerzos menores a los críticos. De igual forma se presentan los resultados obtenidos en las pruebas realizadas en nueve probetas de la Formación Tambor pertenecientes a 2 afloramientos diferentes, llevados a cabo con el fin de establecer la trazabilidad de los ensayos realizados en el equipo.]]></p></abstract>
<abstract abstract-type="short" xml:lang="pt"><p><![CDATA[RESUMO O presente artigo desenvolve a metodologia de desenho para construir um banco de provas que permita determinar o índice subcrítico de fratura em uma rocha através do ensaio de dupla torção, com o objetivo de caracterizar formações fraturadas de origem natural como as localizadas na Bacia de Piedemonte Llanero Colombiano. Estas formações foram submetidas a cargas cíclicas através do tempo as quais ocasionam fraturas que tendem a propagar- se a valores de intensidade de esforços menores aos críticos. Igualmente, são apresentados os resultados obtidos nas provas realizadas em 9 (nove) provetas da formação Tambor pertencentes a 2 (dois) afloramentos diferentes, realizadas com o fim de estabelecer a traçabilidade das provas no equipamento.]]></p></abstract>
<kwd-group>
<kwd lng="en"><![CDATA[Subcritical fracture index]]></kwd>
<kwd lng="en"><![CDATA[Stress intensity factor]]></kwd>
<kwd lng="en"><![CDATA[Critical load speed]]></kwd>
<kwd lng="es"><![CDATA[Indice subcrítico de fractura]]></kwd>
<kwd lng="es"><![CDATA[Factor de intensidad de esfuerzos]]></kwd>
<kwd lng="es"><![CDATA[Velocidad de carga crítica]]></kwd>
<kwd lng="pt"><![CDATA[Índice subcrítico de fratura]]></kwd>
<kwd lng="pt"><![CDATA[Fator de intensidade de esforÃ§os]]></kwd>
<kwd lng="pt"><![CDATA[Velocidade de carga crítica]]></kwd>
</kwd-group>
</article-meta>
</front><body><![CDATA[  <font face="Verdana" size="2">     <p>    <center><b><font face="Verdana, Geneva, sans-serif" size="4">DOUBLE TORSION TESTING MACHINE TO DETERMINE THE SUBCRITICAL FRACTURE INDEX IN ROCKS</b></center></p>      <p>    <center><b>Pedro-Jos&eacute; D&iacute;az-Guerrero<sup>2</sup>, Jenny-Mabel Carvajal<sup>1</sup>* and Miguel-Fernando Palencia-MuÃ±oz<sup>3</sup></b></center></p>      <p>    <center><font size="2"><sup>1</sup>Ecopetrol S.A. Instituto Colombiano del Petr&oacute;leo (ICP), Bucaramanga, Santander, Colombia</center></p>     <p>    <center><font size="2"><sup>2</sup>Escuela de Ingenier&iacute;a Mec&aacute;nica - Universidad Industrial de Santander, Santander, Bucaramanga, Colombia</center></p>     <p>    ]]></body>
<body><![CDATA[<center><font size="2"><sup>3</sup>Escuela de Ingenier&iacute;a Mec&aacute;nica - Universidad Industrial de Santander, Santander, Bucaramanga, Colombia</center></p>      <p>    <center><font size="2">e-mail: <a href="jenny.carvajal@ecopetrol.com.co" target="_blank">jenny.carvajal@ecopetrol.com.co</a></center></p>     <p align="center"><i>*To whom correspondence may be addressed</i></p>     <p>    <center><font size="2">(Received Oct. 25, 2010; Accepted Jun.01, 2011)</center></p>  <hr>     <p><b><font face="Verdana, Geneva, sans-serif" size="3">ABSTRACT</font></b></p>      <p>This paper discusses the design methodology applied to build a testing machine to determine the subcritical fracture index in a rock, based on double torsion testing in order to characterize naturally fractured formations such as those located in the Colombian Llanos Foothill Basin. These formations have been subjected to cyclic loads over time, causing fractures that trend to spread at subcritical stress intensity values. Similarly, it presents the results of testing conducted on nine specimens of the Tambor Formation from 2 different outcrops to establish the testing traceability in the equipment.</p>      <p><i><b>Keywords: Subcritical fracture index, Stress intensity factor, Critical load speed.</b></i></p> <hr>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">RESUMEN</font></b></p>      ]]></body>
<body><![CDATA[<p>El presente art&iacute;culo desarrolla la metodolog&iacute;a de diseÃ±o para construir un banco de pruebas que permita determinar el &iacute;ndice subcr&iacute;tico de fractura en una roca a trav&eacute;s del ensayo de doble torsi&oacute;n, con el objeto de caracterizar formaciones fracturadas de origen natural como las ubicadas en la Cuenca de Piedemonte Llanero Colombiano. Estas formaciones han sido sometidas a cargas c&iacute;clicas a trav&eacute;s del tiempo las cuales ocasionan fracturas que tienden a propagarse a valores de intensidad de esfuerzos menores a los cr&iacute;ticos. De igual forma se presentan los resultados obtenidos en las pruebas realizadas en nueve probetas de la Formaci&oacute;n Tambor pertenecientes a 2 afloramientos diferentes, llevados a cabo con el fin de establecer la trazabilidad de los ensayos realizados en el equipo.</p>      <p><i><b>Palabras claves: Indice subcr&iacute;tico de fractura, Factor de intensidad de esfuerzos, Velocidad de carga cr&iacute;tica.</b></i></p> <hr>        <p><b><font face="Verdana, Geneva, sans-serif" size="3">RESUMO</font></b></p>      <p>O presente artigo desenvolve a metodologia de desenho para construir um banco de provas que permita determinar o &iacute;ndice subcr&iacute;tico de fratura em uma rocha atrav&eacute;s do ensaio de dupla tor&ccedil;&atilde;o, com o objetivo de caracterizar forma&ccedil;&otilde;es fraturadas de origem natural como as localizadas na Bacia de Piedemonte Llanero Colombiano. Estas forma&ccedil;&otilde;es foram submetidas a cargas c&iacute;clicas atrav&eacute;s do tempo as quais ocasionam fraturas que tendem a propagar- se a valores de intensidade de esfor&ccedil;os menores aos cr&iacute;ticos. Igualmente, s&atilde;o apresentados os resultados obtidos nas provas realizadas em 9 (nove) provetas da forma&ccedil;&atilde;o Tambor pertencentes a 2 (dois) afloramentos diferentes, realizadas com o fim de estabelecer a tra&ccedil;abilidade das provas no equipamento.</p>      <p><i><b>Palavras chaves: &Iacute;ndice subcr&iacute;tico de fratura, Fator de intensidade de esfor&ccedil;os, Velocidade de carga cr&iacute;tica.</b></i></p>  <hr>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">1. INTRODUCTION</font></b></p>      <p>At present, there are no geomechanical models in Colombia to characterize subcritical fractured formations. This initiative implemented the subcritical crack growth model used by the University of Austin, Texas (Holder, Olson &amp; Zeno, 2001), which relates crack velocity with rock toughness in order to estimate this subcritical fracture index (SCI) for which a testing machine was designed and built.</p>      <p>SCI is a parameter that can help determine if a natural formation is either susceptible to crack or if it is already cracked, and therefore it can accurately estimate the crack density of the formations to be drilled or produced from. SCI is based on the use of the fracture scale thesis which states that at high values of index, there will be sets of dispersed cracks that may be separated by large or small distances and at low values of index, there will be smaller sets of cracks that trend to follow a pattern because their distance of separation is smaller (Holder et al., 2001).</p>      <p>The studies published by Park and Nara (2006) suggested the use of real field data in order to characterize the different types of rocks. However, the authors never established the equipment or technology used to conduct testing and determine stress intensity factors. They did not propose a geomechanical model nor even consider validating it, because the rock properties were not available.</p>      <p>This paper presents a bibliographic review of rock testing methods used to determine prototype design requirements as published by Sun, and Ouchterlony, (1986). Then, the theory regarding the double torsion testing is described, followed by the design and construction of the prototype and the presentation of the results obtained from 9 specimens sampled from 2 different outcrops, to estimate traceability in the testing machine.</p>      ]]></body>
<body><![CDATA[<p><b><i>Geomechanical model</i></b></p>      <p>The geomechanical model used to estimate fracture density of rock formations is based on subcritical crack growth. This model is suitable to the fracture condition of rocks because cracks can develop and spread slower than rupture rate of intact rock and besides of this, subcritical crack growth states the condition in which the rock is subjected to long load periods with a stress intensity factor (KI) lower than the critical value of the material's stress intensity factor. (KIc), and where the crack spreads at those values of (KI) < (KIc) (Atkinson, 1984), (Atkinson &amp; Meredith, 1987). Now, fracture toughness in this model is determined by the double torsion testing suggested by Gerry and Outwater, (1969) and used by Kies and Clark (1969), to determine the fracture energy of fragile materials as well as adhesive joints (Outwater &amp; Gerry, 1966).</p>      <p><b><i>Principle of Double Torsion Testing</i></b></p>      <p>The test suggests the use of flat samples loaded with perpendicular shear force at the surface as illustrated in <a href="#fig1">Figure 1</a>. A load is applied on the sample and should remain constant initially in order to start the crack spread without changing the stress intensity factor (Ciccotti, 2000). The value of stress will depend, in first place, on the geometry of the sample, its stiffness and the critical load under which the crack spreads (Cho &amp; Gent, 1985).</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f1.jpg"><a name="fig1"></a></p>      <p>The critical stress intensity factor KIC of the sample is measured when the load required to fracture the rock begins to decrease significantly, which means that it begins to deform faster and more easily. In order to determine KIC, a stress intensity factor KI has to be calculated, given by the following expression (Atkinson & Meredith, 1987):</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03e1.jpg"></p>      <p>Similarly, critical crack velocity is defined when KIC is registered, which is the maximum rate at which the crack spreads. Once KIC is observed, in addition to the decrease in the load being applied on the sample, the crack begins to spread faster and more easily, which is when critical fracture velocity is evidenced.</p>      <p>The function which states that the fracture spreads at values of KI&lt;KIC was suggested by Atkinson and Meredith (1987), it calculates the subcritical fracture index, known as subcritical crack growth and establishes that the propagation rate for subcritical crack growth can be described as follows:</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03e2.jpg"></p>      ]]></body>
<body><![CDATA[<p>Similarly, the fracture velocity in the experiment can be determined by load variation values over time using the Equation 3, (Williams &amp; Evans, 1973) in which the value of represents the crack inclination angle, a, crack length, measured on the front surface of the sample and perpendicular to the application of the load.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03e3.jpg"></p>      <p>In this particular case, the function suggested by Holder et al. (2001) establishes that aP can be approximated by a constant C(C=y/a) that relates the compression load displacement applied on the sample and the variation in crack length. The load variation relationship over time dP/dt can be kept constant by increasing the load at defined intervals or by taking data at defined intervals.</p>      <p><b><i>Testing machine Design Parameters</i></b></p>      <p>According to Wittaker (1992) and Budynas and Nisbett (2008) to desing a testing machine certain characteristics must be defined (portability, load capacity, sample size). In this case the testing machine should meet the follo-wing characteristics: First, total weight should be under 25kg. Second, the system should be portable to facilitate transport and installation, while guaranteeing stability in operating conditions. Third, it must have the capacity to hold flat, thin, rectangular samples as illustrated in <a href="#tbl1">Table 1</a>.</p>      <p>In order to accomplish these objectives, a modular design has been suggested to include the functions of securing, applying and measuring the load, along with the displacements generated in the sample.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03t1.jpg"><a name="tbl1"></a></p>      <p><b><i>Structural Module</i></b></p>      <p>This module carries out the functions of storing the sample and holding the load module. It consists of two side plates, the top plate and the bottom plate, all made of AISI-304 stainless steel, connected by stud bolts as illustrated in <a href="#fig2">Figure 2</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f2.jpg"><a name="fig2"></a></p>      ]]></body>
<body><![CDATA[<p>A digital micrometer is coupled on the bottom plate (<a href="#fig3">Figure 3</a>), in a cavity that allows adjustment and alignment for proper load application, in accordance with the requirements of the double torsion test. This guarantees that the sample is resting on 4 points located on the bottom plate of the structure, thus favoring fracture propagation by the notch made beforehand in the middle of the sample, as illustrated in <a href="#fig1">Figure1</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f3.jpg"><a name="fig3"></a></p>      <p><b><i>Load Module</i></b></p>      <p>The load module consists of a digital micrometer which applies the load and measures the displacement generated on the sample while testing. It also has 2 components to transfer the load to the sample. The first component is a joint that connects micrometer with the load cell, and the second component is a joint which connects the load cell with the steel spheres to apply the load on the sample, see <a href="#fig4">Figure 4</a>. In addition to this, the sensor movement has to be restricted to the vertical direction, In order to do so, the micrometer's measurement spindle is secured to the ball bearing, which is connected to the coupling base.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f4.jpg"><a name="fig4"></a></p>      <p><b><i>Control Module</i></b></p>      <p>The purpose of this module is to read and control the variables measured during the test. It consists of an S35 100 lbs load cell, which works at compression and measures the load applied on the sample during testing. To select the load cell the following factors were took into account: rock load measurement interval, availability on the local market and type of load application. It is also important to point out that the micrometer selected for this application is used to assure the accurate axial displacement of the load cell and constrain the movement on a contact point over the sample through a steel sphere. In order to make the data recording and transference easy and standard, a data acquisition port to obtain information in real time was implemented.</p>       <p>This module also has a component to receive data from the load cell and the digital micrometer through the OPTO-22 "SNAP PAC I/O unit". The data are processed with a software designed using the OPTO- 22 programming language to calculate the subcritical crack index. It is important to mention that the signal of the load cell goes through a signal conditioner before processing, to assure an adequate signal transference 2 different voltage sources were used.</p>      <p>After creating the parameterized model in Solid- Works, as illustrated in <a href="#fig4">Figure 4</a>, manufacturing was planned in 3-axle CNC equipment, which carried out the processes of smoothing and polishing, drilling, cavities, outlining and, last but not least, alignment of faces and edges.</p>      <p><b><i>Machine Assembly</i></b></p>      ]]></body>
<body><![CDATA[<p>Once the structural module is built and the couplings and the components to apply the load are manufactured, the equipment must be assembled along with the load cell, the micrometer and the elements of the data acquisition system to form a serial circuit using a TRF 110/24 VAC, as illustrated in <a href="#fig5">Figure 5</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f5.jpg"><a name="fig5"></a></p>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">2. EXPERIMENTAL PROCEDURE</font></b></p>	      <p>Rocks from the Tambor Formation Outcrop were used to validate the test, from which 9 samples were prepared using ASTM-D4543-08 standard, with the respective characteristics and dimensions listed in <a href="#tbl1">Table 1</a>, as illustrated in <a href="#fig6">Figure 6</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f6.jpg"><a name="fig6"></a></p>      <p>After preparing the sample, it was mounted on the workbench (<a href="#fig7">Figure 7</a>). During this part of the process, it was verified that the samples were always placed properly on the stands to make the respective adjustments to begin testing.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f7.jpg"><a name="fig1"></a></p>      <p>During testing, it was observed that the sample always began to crack at the weakest point which was the notch made on the sample, as illustrated in <a href="#fig8">Figure 8</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f8.jpg"><a name="fig8"></a></p>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">3. RESULT ANALYSIS</font></b></p>      ]]></body>
<body><![CDATA[<p>After capturing the data, the critical stress intensity factor KIC was determined based on the values obtained in chart KI over time as illustrated in <a href="#fig9">Figure 9</a> and <a href="#fig10">Figure 10</a> for each of the tests.</p>       <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f9.jpg"><a name="fig9"></a></p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f10.jpg"><a name="fig10"></a></p>      <p>The value taken is the value where the crack begins to spread more quickly and the value of the load applied begins to drop.</p>      <p>Once the critical velocity and intensity values are calculated, the subcritical crack index can be determined as illustrated in <a href="#fig11">Figure 11</a> and <a href="#fig12">Figure 12</a>, and shown in <a href="#tbl2">Table 2</a>.</p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f11.jpg"><a name="fig11"></a></p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03f12.jpg"><a name="fig12"></a></p>      <p align="center"><img src="img/revistas/ctyf/v4n3/v4n3a03t2.jpg"><a name="tbl2"></a></p>      <p>The results show that for the first Outcrop, SCI is in the range from 12 to 17. In the case of the second Outcrop, it is between 22 and 27. This difference may be due to the rock's possible cut planes according to Holder et al. (2001) and the fact that the plugs have been removed. In general, you could say that SCI for the Tambor Formation is low because none of the values obtained is over 30. Therefore, it can be stated that the Formation is prone to cracking.</p>        <p><b><font face="Verdana, Geneva, sans-serif" size="3">4. CONCLUSIONS</font></b></p>  <ul> <ol>    ]]></body>
<body><![CDATA[<p>&bull; It is inevitable to find dispersion in the results, to determine the value of this property in a porous medium. Nevertheless, it was found that the values of the deviations in the propagation velocities and stress intensity factors in both Outcrops are low, although the respective SCI values are different.</p>    </ol>  <ol>    <p>&bull; It should be taken into account that the stress and deformation conditions to which the rock is subjected will vary depending on their location. Therefore, results may slightly vary, even in rocks from the same formation.</p>    </ol>  <ol>    <p>&bull; Although a SCI value of 25 would lead to infere that the values indicate a rock whose behavior is related to formations with high fracture density, spaced regularly and spreading at the same time, it is important to point out that it was observed that the tool used to measure displacement and load is not sensitive enough to detect changes in crack geometry when the latter is applied. This means the portability of the prototype may be compromised upon attempting to establish a more real SCI value.</p>    </ol>     </ul>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">ACKNOWLEDGMENTS</font></b></p>      <p>To the Wellbore Stability Research Group assigned to Universidad Industrial de Santander and Instituto Colombiano del Petr&oacute;leo -ICP- (Agreement 002-2003). Also, to the technical staff of ICPÂ´s Rock Mechanics Laboratory, for all their cooperation and support.</p> <hr>      <p><b><font face="Verdana, Geneva, sans-serif" size="3">REFERENCES</font></b></p>      ]]></body>
<body><![CDATA[<p>ASTM-D4543-08. Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances.</p>      <!-- ref --><p>Atkinson, B. K. (1984). Subcritical crack growth in geological materials. J. Geo. Res. 89 (B6), 4077-4114.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000094&pid=S0122-5383201100010000300001&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Atkinson, B. &amp; Meredith, P. G. (1987). The theory of subcritical crack growth with applications to rocks and minerals, in Fracture Mechanics. Academic Press, London.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000095&pid=S0122-5383201100010000300002&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Budynas, R. G. &amp; Nisbett, J. k. (2008). DiseÃ±o en Ingenier&iacute;a Mec&aacute;nica de Shigley. McGrawHill.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000096&pid=S0122-5383201100010000300003&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Cho, K. &amp; Gent, A. N. (1985). An improved torsional method for determining the fracture toughness of stiff materials and of adhesive joints. International. J. Fracture, 239-244.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000097&pid=S0122-5383201100010000300004&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Ciccotti, M., Gonzato, G. &amp; Mulargia, F. (2000). The double torsion loading configuration for fracture propagation: an improved methodology for the load-relaxation at constant displacement. International J. Rock Mech. &amp; Min. Scie. 37: 1103-1113.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000098&pid=S0122-5383201100010000300005&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Collins, J. A. (2003). Mechanical Design of Machine Elements and Machines. Jhon Wiley and Sons.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000099&pid=S0122-5383201100010000300006&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Evans, A. G. (1972). A method for evaluating the timedependent failure characteristics of britte materials - and its application to polycristalline alumina. J. Mat. Scie., 7 (10), 1137-1146.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000100&pid=S0122-5383201100010000300007&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Gerry, D. J. &amp; Outwater, J. O. (1969). On the fracture energy, rehearing velocity and refracture energy of cast epoxy resin. J. Adhesion, 1:290 298.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000101&pid=S0122-5383201100010000300008&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Holder, J., Olson, J. E. &amp; Zeno, P. (2001). Experimental determination of subcritical crack growth.Geophysical Research Letters, 28 (4), 599-602.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000102&pid=S0122-5383201100010000300009&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Kies J. A. &amp; Clark A. B. J. (1969). Fracture propagation rates and times to fail proof stresses in bulk glass. Proceedings of the Second International Conference on Fracture; 483-491.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000103&pid=S0122-5383201100010000300010&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Nara, Y. (2006). Subcritical Crack Growth in Rock, Int. J. Rock Mech. Min. Scie. 43 (3), 437-453.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000104&pid=S0122-5383201100010000300011&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Outwater, J. O. &amp; Gerry, D. J. (1966). On the fracture energy of glass NRL Interim Contract Report.University of Vermont, Burlington.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000105&pid=S0122-5383201100010000300012&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Park, N. (2006). Discrete Element Modeling of Rock Fracture Behavior: Fracture Toughness and Time-Dependent Fracture Growth,Dissertation by Doctor Philosophy. The University of Texas, Austin, U.S.A. 291pp.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000106&pid=S0122-5383201100010000300013&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Saadaouia, M., Reynauda, P., Fantozzi, G.,s Peronnet, F. &amp; Caspar, P. (2000). Slow crack growth study of plaster using the double torsion method. Ceramics International, 26 (4), 435-439.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000107&pid=S0122-5383201100010000300014&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Sun, Z. &amp; Ouchterlony, F. (1986). Fracture toughness of stripa granite cores. International J. Rock Mech. Min. Scie. &amp; Geom. Abstracts, 23 (6), 399-409.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000108&pid=S0122-5383201100010000300015&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Whittaker BN, S. R. (1992). Rock Fracture Mechanics - Principles, Design and Applications. New York: Elsevier Science, 90-107.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000109&pid=S0122-5383201100010000300016&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --><!-- ref --><p>Williams, D. P. &amp; Evans, A. G. (1973). A simple method for studying slow crack growth. J. Test Eval., 1 (4), 264-270.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[&#160;<a href="javascript:void(0);" onclick="javascript: window.open('/scielo.php?script=sci_nlinks&ref=000110&pid=S0122-5383201100010000300017&lng=','','width=640,height=500,resizable=yes,scrollbars=1,menubar=yes,');">Links</a>&#160;]<!-- end-ref --> ]]></body><back>
<ref-list>
<ref id="B1">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Atkinson]]></surname>
<given-names><![CDATA[B. K.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[Subcritical crack growth in geological materials]]></article-title>
<source><![CDATA[J. Geo. Res.]]></source>
<year>1984</year>
<volume>89</volume>
<page-range>4077-4114</page-range></nlm-citation>
</ref>
<ref id="B2">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Atkinson]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
<name>
<surname><![CDATA[Meredith]]></surname>
<given-names><![CDATA[P. G.]]></given-names>
</name>
</person-group>
<source><![CDATA[The theory of subcritical crack growth with applications to rocks and minerals, in Fracture Mechanics]]></source>
<year>1987</year>
<publisher-loc><![CDATA[London ]]></publisher-loc>
</nlm-citation>
</ref>
<ref id="B3">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Budynas]]></surname>
<given-names><![CDATA[R. G.]]></given-names>
</name>
<name>
<surname><![CDATA[Nisbett]]></surname>
<given-names><![CDATA[J. k.]]></given-names>
</name>
</person-group>
<source><![CDATA[Diseño en Ingeniería Mecánica de Shigley]]></source>
<year>2008</year>
<publisher-name><![CDATA[McGrawHill]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B4">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Cho]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
<name>
<surname><![CDATA[Gent]]></surname>
<given-names><![CDATA[A. N.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[An improved torsional method for determining the fracture toughness of stiff materials and of adhesive joints. International]]></article-title>
<source><![CDATA[J. Fracture]]></source>
<year>1985</year>
<page-range>239-244</page-range></nlm-citation>
</ref>
<ref id="B5">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ciccotti]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Gonzato]]></surname>
<given-names><![CDATA[G.]]></given-names>
</name>
<name>
<surname><![CDATA[Mulargia]]></surname>
<given-names><![CDATA[F.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[he double torsion loading configuration for fracture propagation: an improved methodology for the load-relaxation at constant displacement]]></article-title>
<source><![CDATA[International J. Rock Mech. & Min. Scie]]></source>
<year>2000</year>
<volume>37</volume>
<page-range>1103-1113</page-range></nlm-citation>
</ref>
<ref id="B6">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Collins]]></surname>
<given-names><![CDATA[J. A.]]></given-names>
</name>
</person-group>
<source><![CDATA[]]></source>
<year>2003</year>
<publisher-name><![CDATA[Jhon Wiley and Sons]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B7">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Evans]]></surname>
<given-names><![CDATA[A. G.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[A method for evaluating the timedependent failure characteristics of britte materials - and its application to polycristalline alumina]]></article-title>
<source><![CDATA[J. Mat. Scie.]]></source>
<year>1972</year>
<volume>7</volume>
<numero>10</numero>
<issue>10</issue>
<page-range>1137-1146</page-range></nlm-citation>
</ref>
<ref id="B8">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Gerry]]></surname>
<given-names><![CDATA[D. J.]]></given-names>
</name>
<name>
<surname><![CDATA[Outwater]]></surname>
<given-names><![CDATA[J. O.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[On the fracture energy, rehearing velocity and refracture energy of cast epoxy resin]]></article-title>
<source><![CDATA[J. Adhesion]]></source>
<year>1969</year>
<volume>1</volume>
<page-range>290 298</page-range></nlm-citation>
</ref>
<ref id="B9">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Holder]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Olson]]></surname>
<given-names><![CDATA[J. E.]]></given-names>
</name>
<name>
<surname><![CDATA[Zeno]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[Experimental determination of subcritical crack growth]]></article-title>
<source><![CDATA[Geophysical Research Letters]]></source>
<year>2001</year>
<volume>28</volume>
<numero>4</numero>
<issue>4</issue>
<page-range>599-602</page-range></nlm-citation>
</ref>
<ref id="B10">
<nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Kies]]></surname>
<given-names><![CDATA[J. A.]]></given-names>
</name>
<name>
<surname><![CDATA[Clark A.]]></surname>
<given-names><![CDATA[B. J.]]></given-names>
</name>
</person-group>
<source><![CDATA[Fracture propagation rates and times to fail proof stresses in bulk glass.]]></source>
<year>1969</year>
<conf-name><![CDATA[ Proceedings of the Second International Conference on Fracture]]></conf-name>
<conf-loc> </conf-loc>
<page-range>483-491</page-range></nlm-citation>
</ref>
<ref id="B11">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Nara]]></surname>
<given-names><![CDATA[Y.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[Subcritical Crack Growth in Rock]]></article-title>
<source><![CDATA[Int. J. Rock Mech. Min. Scie.]]></source>
<year>2006</year>
<volume>43</volume>
<numero>3</numero>
<issue>3</issue>
<page-range>437-453</page-range></nlm-citation>
</ref>
<ref id="B12">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Outwater]]></surname>
<given-names><![CDATA[J. O.]]></given-names>
</name>
<name>
<surname><![CDATA[Gerry]]></surname>
<given-names><![CDATA[D. J.]]></given-names>
</name>
</person-group>
<collab>University of Vermont</collab>
<source><![CDATA[On the fracture energy of glass NRL Interim Contract Report.]]></source>
<year>1966</year>
<publisher-loc><![CDATA[Burlington ]]></publisher-loc>
</nlm-citation>
</ref>
<ref id="B13">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Park]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
</person-group>
<source><![CDATA[Discrete Element Modeling of Rock Fracture Behavior: Fracture Toughness and Time-Dependent Fracture Growth]]></source>
<year>2006</year>
<page-range>291</page-range></nlm-citation>
</ref>
<ref id="B14">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Saadaouia]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Reynauda]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
<name>
<surname><![CDATA[Fantozzi]]></surname>
<given-names><![CDATA[G.,s]]></given-names>
</name>
<name>
<surname><![CDATA[Peronnet]]></surname>
<given-names><![CDATA[F.]]></given-names>
</name>
<name>
<surname><![CDATA[Caspar]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[Slow crack growth study of plaster using the double torsion method]]></article-title>
<source><![CDATA[Ceramics International]]></source>
<year>2000</year>
<volume>26</volume>
<numero>4</numero>
<issue>4</issue>
<page-range>435-439</page-range></nlm-citation>
</ref>
<ref id="B15">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Sun]]></surname>
<given-names><![CDATA[Z.]]></given-names>
</name>
<name>
<surname><![CDATA[Ouchterlony]]></surname>
<given-names><![CDATA[F.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[Fracture toughness of stripa granite cores]]></article-title>
<source><![CDATA[International J. Rock Mech. Min. Scie. & Geom. Abstracts]]></source>
<year>1986</year>
<volume>23</volume>
<numero>6</numero>
<issue>6</issue>
<page-range>399-409</page-range></nlm-citation>
</ref>
<ref id="B16">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Whittaker BN]]></surname>
<given-names><![CDATA[S. R.]]></given-names>
</name>
</person-group>
<source><![CDATA[Rock Fracture Mechanics - Principles, Design and Applications]]></source>
<year>1992</year>
<page-range>90-107</page-range></nlm-citation>
</ref>
<ref id="B17">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Williams]]></surname>
<given-names><![CDATA[D. P.]]></given-names>
</name>
<name>
<surname><![CDATA[Evans]]></surname>
<given-names><![CDATA[A. G.]]></given-names>
</name>
</person-group>
<article-title xml:lang="en"><![CDATA[A simple method for studying slow crack growth]]></article-title>
<source><![CDATA[J. Test Eval.]]></source>
<year>1973</year>
<volume>1</volume>
<numero>4</numero>
<issue>4</issue>
<page-range>264-270</page-range></nlm-citation>
</ref>
</ref-list>
</back>
</article>
