Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
DYNA
versión impresa ISSN 0012-7353
Resumen
CAMACHO-TAUTA, JAVIER; JIMENEZ ALVAREZ, JUAN DAVID y REYES-ORTIZ, OSCAR JAVER. A PROCEDURE TO CALIBRATE AND PERFORM THE BENDER ELEMENT TEST. Dyna rev.fac.nac.minas [online]. 2012, vol.79, n.176, pp.10-18. ISSN 0012-7353.
The bender element (BE) test method is used in a laboratory to obtain the shear wave velocity of soils. Despite its apparent simplicity, there is still no standard for this test. A number of factors affect the reliability of the results. These factors are taken into account to design and build a BE system in a triaxial cell. A method for calibrating the system is proposed, using aluminum rods of different lengths. Recommendations are made regarding the selection of the frequency of the pulse used to produce the perturbation for carrying out the test. Finally, a series of tests carried out on two kinds of sand specimens are presented.
Palabras clave : bender element; shear modulus; shear wave velocity.