SciELO - Scientific Electronic Library Online

 
vol.82 issue192How to promote distributed resource supply in a Colombian microgrid with economic mechanism?: System dynamics approachAnalysis of voltage sag compensation in distribution systems using a multilevel DSTATCOM in ATP/EMTP author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Abstract

TRUJILLO-OROZCO, Odair Augusto; GARCES-GOMEZ, Yeison Alberto; USTARIZ-FARFAN, Armando Jaime  and  CANO-PLATA, Eduardo Antonio. Loads Characterization using the instantaneous power tensor theory. Dyna rev.fac.nac.minas [online]. 2015, vol.82, n.192, pp.19-25. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v82n192.48565.

This paper presents a novel methodology to characterize loads using the instantaneous power tensor theory in three-phase three-wire or four-wire systems. Tensor theory is based on the dyadic product between voltage and current instantaneous vectors; this definition allows us to represent the phenomena of power quality produced by loads operation, through the deformation of a cube and the trajectory of one of its three-dimensional vectors. This new way of characterization could help researchers to construct better models of three-phase loads, or to achieve a better monitoring and machines diagnosis. Results are reached by implementing simulations in MATLAB® and endorsed with experimental measurements.

Keywords : Power quality; vector trajectory; paths; current-voltage characteristic; characterizing loads; harmonics; Lissajous; diagnosis.

        · abstract in Spanish     · text in English     · English ( pdf )