SciELO - Scientific Electronic Library Online

 
vol.83 número195Voltage sag assessment using an extended fault positions method and Monte Carlo simulationDesign of an open source-based control platform for an underwater remotely operated vehicle índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

MANZANO-AGUGLIARO, Francisco  e  CARRILLO-VALLE, Javier. Conversion of an existing electrostatic precipitator casing to Pulse Jet Fabric filter in fossil power plants. Dyna rev.fac.nac.minas [online]. 2016, vol.83, n.195, pp.189-197. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v83n195.49723.

The combustion process of power generation plants originates particulates. There are different technologies to collecting particulate such as electrostatic precipitators (ESPs) or fabric filters. Currently, these ESPs take 25 or 35 years in service and if the performance expectations of their Plants are positives, improving investments required which can adapt to the new particulate emission limits becoming more stringent. This paper analyzes an alternative means great savings in investment costs; Conversion of the existing ESP casing to a Pulse Jet fabric filter. This study also presents a real case, implementing this conversion with good results in unit of 660 MW power plants of Italy.

Palavras-chave : particulate; opacimeter; electrostatic precipitator; fabric filter; pulse-jet.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )